Strength of Offshore Pipelines in Different Operation States and Analyzing Software

在近海管线的铺设、安装、使用过程中有多种作业状态：在位、悬跨、挖沟、提吊、铺管等。各种状态下管线的受力特点不同,加上管线结构、海况和海底土壤等因素又都很复杂,所以近海管线的强度分析难度大、内容多。分别采用解析方法、数值方法（有限元法、打靶法）和二者结合来解决理论上的（如几何非线性、动边界等）、实用性方面的难点。在理论分析的基础上,编制了符合产业部门工程师使用要求的近海管线强度分析软件。介绍了该软件进行力学分析时采用的理论以及软件界面。

A finite element method for cracked components of structures

In this paper, a method is developed for determining the effective stiffness of the cracked component. The stiffness matrix of the cracked component is integrated into the global stiffness matrix of the finite element model of the global platform for the FE calculation of the structure in any environmental conditions. The stiffness matrix equation of the cracked component is derived by use of the finite variation principle and fracture mechanics. The equivalent parameters defining the element that simulates the cracked component are mathematically presented, and can be easily used for the FE calculation of large scale cracked structures together with any finite element program. The theories developed are validated by both lab tests and numerical calculations, and applied to the evaluation of crack effect on the strength of a fixed platform and a self-elevating drilling rig.

Microfluidic effects of transporting signaling components in cell coculture chips

A theoretical model has been developed to investigate the microfluidic transport of the signaling chemicals in the cell coculture chips. Using an epidermal growth factor (EGF)-like growth factor as the sample chemical, the effects of velocities and channel geometry were studied for the continuous-flow microchannel bioreactors. It is found that different perfusion velocities must be applied in the parallel channels to facilitate the communication, i.e., transport of the signaling component, between the coculture channels. Such communication occurs in a unidirectional way because the signaling chemicals can only flow from the high velocity area to the low velocity area. Moreover, the effect of the transport of the signaling component between the coculture channels on the growth of the monolayer cells and the multicellular tumor spheroid (MTS) in the continuous-flow coculture environment were simulated using 3D models. The numerical results demonstrated that the concentration gradients will induce the heterogeneous growth of the cells and the MTSs, which should be taken into account in designing the continuous-flow perfusion bioreactor for the cell coculture research.

The elasto-damage theory of the components assembling model

The potential energy in materials is well approximated by pair functional which is composed of pair potentials and embedding energy. During calculating material potential energy, the orientational component and the volumetric component are derived respectively from pair potentials and embedding energy. The sum of energy of all these two kinds of components is the material potential. No matter how microstructures change, damage or fracture, at the most level, they are all the changing and breaking atomic bonds. As an abstract of atomic bonds, these components change their stiffness during damaging. Material constitutive equations have been formulated by means of assembling all components' response functions. This material model is called the component assembling model. Theoretical analysis and numerical computing indicate that the proposed model has the capacity of reproducing some results satisfactorily, with the advantages of great conceptual simplicity, physical explicitness, and intrinsic induced anisotropy, etc.

Phase control of higher spectral components in the presence of a static electric field

We investigate the higher spectral component generations driven by a few-cycle laser pulse in a dense medium when a static electric field is present. Our results show that, when assisted by a static electric field, the dependence of the transmitted laser spectrum on the carrier-envelope phase (CEP) is significantly increased. Continuum and distinct peaks can be achieved by controlling the CEP of the few-cycle ultrashort laser pulse. Such a strong variation is due to the fact that the presence of the static electric field modifies the waveform of the combined electric field, which further affects the spectral distribution of the generated higher spectral components.

Dissecting the matrilineal components of Tongjiang cattle from Southwest China

Tongjiang cattle are a local cattle population of Sichuan Province, China, numbering approximately half a million in 2005. They have long been grouped into the Bashan breed, although they have a unique breeding history and phenotypic characteristics, as w

Matrilineal Components and Genetic Relationship of Silkies from China and Japan

Silkie is a famous black-bone chicken breed with beautiful silky feather. The unique medical property of this chicken was recorded in Chinese traditional medicine dictionary about 700 years ago. In this study, we analyzed the mtDNA D-loop sequence variation of 26 Bairong Silkies from Fujian Province, China, together with 100 reported Silkie mtDNAs from China and Japan, and studied their matrilineal components and genetic relationship. A total of 21 haplotypes were detected, which could be assigned to six haplogroups (A-E, G). Among them, haplogroups D and G were exclusively presented in Japanese Silkies and Chinese Silkies, respectively. Chinese Silkies had higher frequency of lineages belonging to haplogroups A, B, and E, and lower frequency of haplogroup C than Japanese Silkies. For the four Chinese Silkie populations, most of samples of Taihe, Chengdu, and Hubei Silkies were grouped in haplogroups A, B, and C, whereas most of Bairong Silkies were grouped in haplogroup E. Five haplotypes were shared by Japanese and Chinese Silkies. The genetic diversity of each Silkie population varied, but the overall diversity of Chinese Silkies was similar to that of Japanese Silkies. Taken together, our results confirmed the genetic connection between Chinese and Japanese Silkies, but also clearly showed that the matrilineal genetic structures of Chinese and Japanese Silkies had some differences.