Preparation and characterization of Si sheets by renewed SSP technique

Silicon sheets from powder (SSP) ribbons have been prepared by modified SSP technique using electronic-grade (9N purity) silicon powder. The surface morphology, crystallographic quality, composition and electric properties of the SSP ribbons were investigated by surface profiler, X-ray diffraction (XRD), scanning electron microscopy (SEM), metallurgical microscope, Auger electron spectroscopy (AES) and four-point probe apparatus, respectively. The results show that the SSP ribbon made from electronic-grade silicon powder is a suitable candidate for the substrates of crystalline silicon thin film (CSiTF) solar cells, which could meet the primary requirements of CSiTF solar cell process on the substrates, including surface smoothness, crystallographic quality, purity and electric conductivity, etc. (C) 2004 Elsevier B.V. All rights reserved.

QE and Suns-V-oc study on the epitaxial CSiTF solar cells

In order to clarify the major factors having confined the efficiencies of as-prepared crystalline silicon thin film (CSiTF) solar cells on the SSP (silicon sheets from powder) ribbons, QE (quantum efficiency) and Suns-V-oc study were performed on the epitaxial CSiTF solar cells fabricated on the SSP ribbons, the SSP ribbons after surface being zone melting recrystallized (ZMR) and single crystalline silicon (sc-Si) substrates. The results show that the epi-layers deposited on the SSP ribbons have rough surfaces, which not only increases the diffusion reflectance on the surfaces but also makes the anti-reflection coatings become structure-loosened, both of which would deteriorate the light trapping effect; in addition, the epi-layers deposited on the SSP ribbons possess poor crystallographic quality, so the heavy grain boundary (GB) recombination limits the diffusion length of the minority carriers in the epi-layers, which makes the as-prepared CSiTF solar cells suffer the worse spectra response at long-wavelength range. Nearly all the dark characteristic parameters of the CSiTF solar cells are far away from the ideal values. The performances of the CSiTF solar cells are especially affected by too high I-02 (the dark saturation current of space charge region) values and too low R-sh (parallel resistance) values. The higher 102 values are mainly caused by the heavy GB recombination resulting from the poor crystallographic qualities of the silicon active layers in the space charge regions, while the lower R-sh values are attributed to the electrical leakage at the un-passivated PN junction or solar cell edges after the solar cells are cut by the laser scriber.

水稻(Oryza sativa L. ssp japonica)幼苗根质膜蛋白质组分析

根质膜具有重要的生物学功能，它参与了根响应脱落酸（ABA）的一系列活动。尽管已经有很多有关ABA影响根的生长和发育的报道，但是在蛋白质组水平上研究参与ABA信号转导及相关活动的质膜蛋白质的报道还未见到。我们期望利用蛋白质组学技术平台研究外源ABA胁迫下水稻根质膜与ABA功能相关的蛋白质组的变化。 本论文通过双向电泳（2DE）结合质谱（MALDI-TOF MS 和 MALDI-TOF/TOF MS）分析的方法鉴定了102个质膜相关蛋白质。这些蛋白质功能涉及到跨膜运输（16.2%）、胁迫反应（14.3%）、物质运输（4.8%）、细胞骨架动态变化（5.7%）、细胞壁重建（3.8%）、碳代谢和能量循环（13.3%）、蛋白质代谢（14.3%）、信号转导（18.1%）和其他功能的蛋白质（4.8%），以及未知功能的蛋白质（2.9%）。其中大约30％的蛋白质以同工型的形式存在。在这些鉴定结果中，有10个斑点（代表10种蛋白质）已被报道为质膜特异的蛋白质;68个蛋白质斑点（代表58种蛋白质）是质膜相关蛋白质。其余54个蛋白质斑点（代表42种蛋白质）是首次在水稻根的质膜囊泡中被鉴定出来。 在ABA处理条件下，我们在2DE胶上发现了15个响应ABA调节的蛋白质斑点。9个上调的蛋白质斑点分别代表以下9种蛋白质：vacuolar proton-ATPase A subunit, vacuolar ATPase B subunit、patatin、 Salt-stress root protein RS1、谷氨酰氨合成酶（Glutamine synthetase，GS）、OSR40c1、H+-exporting ATPase （vacuolar ATPase E subunit）、甘油醛-3-磷酸脱氢酶I型（glyceraldehyde-3- phosphate dehydrogenase, type I，GADPH）和醛缩酶C-1（aldolase C-1）。6个下调的蛋白质斑点分别代表4种蛋白质：endosperm lumenal binding protein、remorin protein、富含脯氨酸蛋白质（glycine-rich protein，GRP）和蔗糖合成酶（sucrose synthase, SuSy）。其中，OSR40c1和endosperm lumenal binding protein与蛋白质合成相关，从它们与ABA的关系中可以看出，ABA可能抑制了细胞的蛋白质合成。而vacuolar proton-ATPase A subunit、vacuolar ATPase B subunit和 H+-exporting ATPase参与了细胞质pH的调控，ABA致使了细胞质pH的上升。甘油醛-3-磷酸脱氢酶I型、醛缩酶C-1和蔗糖合酶参与了细胞壁的生长发育，ABA的作用可能导致了细胞壁生长发育的延迟。ABA促使Patatin上升，其作用可能与质膜膜脂的降解有关。而ABA的刺激也使谷氨酰氨合成酶的表达显著上升，谷氨酰氨合成酶可以去除细胞内有害的游离NH+4。同时还有未知功能的富含脯氨酸蛋白质（glycine-rich protein，GRP）同样受到ABA的诱导，但具体的功能及其与ABA的关系还要进一步的实验证据。

Transmission electron microscopy study of triple-ribbon contrast features in a ZnTe epitaxial layer

A transmission electron microscopy study of triple-ribbon contrast features in a ZnTe layer grown epitaxially on a vicinal GaAs (001) substrate is reported. The ribbons go through the layer as threading dislocations near the [<(11)over bar 2>](111) or [112](<(11)over bar 1>) directions. Each of these (with a 40 nm width) has two narrow parts enclosed by three partial dislocations (with a 20 nm spacing). By contrast analysis and contrast simulation, the ribbons have been shown to be composed of two partially overlapping stacking faults. Their origin is attributed to a forced reaction between two crossing perfect misfit dislocations.

ELECTRON-STATES OF A STACKING-FAULT RIBBON IN SILICON

The electronic structure of a bounded intrinsic stacking fault in silicon is calculated. The method used is an LCAO-scheme (Linear Combinations of Atomic Orbitals) taking ten atomic orbitals of s-, p-, and d-type into account. The levels in the band gap are extracted using Lanczos' algorithm and a continued fraction representation of the local density of states. We find occupied states located up to 0.3 eV above the valence band maximum (E(v)). This significantly differs from the result obtained for the ideal infinite fault for which the interface state is located at E(v)+ 0.1 eV.

Nine microsatellite DNA primers for Hippophae rhamnoides ssp sinensis (Elaeagnaceae)

Hippophae rhamnoides ssp. sinensis occurs mainly in the and regions of northwest China. The wood stands of this subspecies play an important role in maintaining the local ecosystems in these regions. In addition, the genetic characteristics are essential to understand the historical range changes of this subspecies and its morphological differentiation with other subspecies. In this study, we developed nine microsatellite loci for this subspecies for the first time. We used the combining biotin capture method to enrich AG/CT/AC/GT/CG/GTG/CCA microsatellites. Twenty-six microsatellites were isolated from the enriching library and nine of them were found to be polymorphic through screening 12 distantly distributed individuals. The number of alleles per locus ranged from three to twelve and expected heterozygosity from 0.2659 to 0.4767, respectively. We further performed cross-priming tests in another subspecies and two congeneric species. These firstly isolated loci will provide a useful tool to investigate the genetic structure of this subspecies and its morphological differentiation from the other subspecies.

Genome constitutions of Hystrix patula, H-duthiei ssp duthiei and H-duthiei ssp longearistata (Poaceae : Triticeae) revealed by meiotic pairing behavior and genomic in-situ hybridization

Genomic constitutions of three taxa of Hystrix Moench, H. patula, H. duthiei ssp. duthiei and H. duthiei ssp. longearistata, were examined by meiotic pairing behavior and genomic in-situ hybridization. Meiotic pairing in hybrids of H. patula x Pseudoroegneria spicata (St), H. patula x Elymus wawawaiensis (StH), H. patula x H. duthiei ssp. longearistata, H. patula x Psathyrostachys huashanica (Ns(h)), H. duthiei ssp. duthiei x Psa. huashanica, H. duthiei ssp. longearistata x Psa. huashanica, Leymus multicaulis (NsXm) x H. duthiei ssp. longearistata averaged 6.53, 12.83, 1.32, 0.29, 5.18, 5.11 and 10.47 bivalents per cell, respectively. The results indicate that H. patula has the StH genome and H. duthiei ssp. duthiei and H. duthiei ssp. longearistata have the NsXm genome. Results of genomic in-situ hybridization analysis strongly supported the chromosome pairing data; therefore it is concluded that the type species of Hystrix, H. patula, should be included in Elymus, and that H. duthiei ssp. duthiei and H. duthiei ssp. longearistata should be transferred to Leymus.

In Situ Observations On The Fracture Process Of Metallic Glassy Ribbons

Crack propagation and strain field evolution in two metallic glassy ribbons are studied using in situ scanning electron microscopy and the white digital speckle correlation method. Strain state at the crack tip, which depends heavily on the fracture toughness, plays a key role in fracture. A high degree of shear strain concentration in tough glassy ribbon can satisfy the critical shear strain, resulting in shear fracture, whereas a high degree of linear strain concentration in brittle glassy ribbon can initiate normal tensile fracture. (C) 2008 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

BONDING OF ALUMINA AND METAL USING BULK METALLIC GLASS FORMING ALLOY

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.