东天山后碰撞镁铁-超镁铁岩镍铜硫化物矿床PGE地球化学示踪与富集规律研究

Eastern Tianshan area, a Paleozoic complex trench-arc-basin system, experienced multi-period sudbuction and collision in geological history. A large number of Early Permian mafic-ultramafic intrusions emplaced along deep faults in post-collision extension tectonic stage and hosted a series of magmatic Cu-Ni sulfide deposits. This paper sets newly-discovered Tianyu magmatic Cu-Ni sulfide deposit related to small intrusion as an example. On basis of the study of ore-forming mechanism of Cu-Ni deposit, we compared PGE content and discussed enrichment mechanism and regularity of mafic-ultramafic rocks and ores in Jueluotage tectonic belt and Central Tianshan Massif. PGE and Cu, Ni, S contents correlate with each other. PGE is mainly controlled by S content.Samilar PGE distribution patterns of mafic-ultramafic show that complex originated from the same parental magma; Pd/Ir and Ni/Cu ratios indicate that high-Mg basaltic magma and deep sulfide segregation happened during magma evolution process. PGE and Cu-Ni ores are enriched in liquid sulfide and only individual samples completely control by monosulfide solid solution. Comparison of all control factors, early segregation of sulfide and quality of supply of magma may be the key factors leading to the Eastern Tianshan magmatic copper-nickel sulfide deposits don’t reach PGE grade, but we do not rule out the possibility of occurrence continuous mafic-ultramafic rocks and PGE-rich layer in deep.

重庆城口地区早前寒武系黑色岩系研究：（3）巴山组硅质岩中PGE异常的地球化学研究

以猪草河剖面和羊儿坝剖面为例，进行硅质岩的PGE与微量元素等地球化学分析，结果表明：槽区硅质岩中的PGE异常受控于硅质岩中火山物质（蚀变成粘土矿物）的多少，PGE与Se、Rb、Cs、Ti、Cr、Zr等具有良好的相关性；猪草河剖面远离陆源区，沉积厚度大，更靠近火山活动区域，接受火山粗碎屑物质的量多；羊儿坝剖面远离火山活动中心，主要接受了火山灰等细碎屑物质，更接近陆源区，受一定量的陆源碎屑物质影响。根据Cr／Co、Nb／Ta、Pd／Ir-Ni／Cu及Ni／Pd-Cu／h对岩浆性质的约束，当时岩浆性质为基性玄武岩。根据La-Y-Nb图解和Th-Hf-Ta图解的进一步约束，表明当时的火山岩浆性质为钙碱性的火山弧玄武岩。

四川冕宁稀土矿床碳酸岩PGE地球化学初步研究

报道了四川冕宁稀土矿床碳酸岩7件样品的PGE和Au含量分析结果，其含量（WB／10^-9）范围分别为Ir0．5～0．78，Ru 1．61～6．75，Rh 0．08～0．14，Pt 2．62～12．15，Pd 1．11γ3．65和Au1．24～8．61。原始地幔标准化的PGE模式呈Ru、Pt、Pd相对富集和Ir、Rh相对亏损的“燕子型”。分析认为，碳酸岩具有一定携带PGE的能力；本区碳酸岩具“燕子型”PGE配分模式可能是其源区地幔PGE配分模式的反演；深源富CO2流体交代作用原始地幔可能是形成其“燕子型”PGE配分模式主要因素。

峨眉山大火成岩省Ni-Cu-PGE矿床矿化类型变异机理研究

在峨眉山大火成岩省（ELIP）产出许多岩浆Cu-Ni-PGE岩浆硫化物矿床，如金宝山、杨柳坪、力马河、白马寨，以及大槽－阿布郎当矿化岩体。根据成矿元素组成特征，这些矿床可以区分为多种不同矿化类型，有以铂族元素为主贫铜镍的矿床，如金宝山Pt-Pd矿床；有含较高铂族元素和铜镍的矿床，如杨柳坪Ni-Cu-PGE矿床；也有贫铂族元素富铜镍的矿床，以力马河和白马寨Ni-Cu矿床最为典型。造成峨眉山大火成岩省中Ni-Cu-PGE岩浆硫化物矿床矿化类型变异的原因是什么？它们的母质岩浆性质如何，产生于怎样的熔融程度？既然能形成岩浆硫化物矿床，造成硫化物熔离的原因有哪些，什么因素起到了关键作用？这些矿化类型多样的Ni-Cu-PGE矿床的成矿岩浆有何差异？产生差异的原因是什么？带着这些疑问，通过借鉴国内外Ni-Cu-PGE岩浆硫化物矿床研究的经验，本文以金宝山铂钯矿、力马河镍矿及大槽－阿布郎当岩体的地球化学研究为基础，结合近几年来前人对杨柳坪，白马寨等矿床的系统研究，本文试图解决上述疑问。现在取得的主要认识有： 1） 根据成矿元素组成特征，可以把峨眉山大火成岩省中（ELIP）存在的Ni-Cu-PGE岩浆硫化物矿床分成多种不同的矿化类型，包括PGE矿床（例如金宝山Pt-Pd矿），Ni-Cu-PGE矿床（例如杨柳坪矿床），Ni-Cu矿床（例如力马河和白马寨矿床），以及弱矿化或不含矿的超镁铁质堆晶岩体（例如大槽－阿布郎当岩体）。通过对ELIP中几种类型Cu-Ni-PGE矿床成矿母岩浆的研究发现，它们均具有类似峨眉山苦橄岩的成分特征，表明母岩浆形成于较高程度的地幔部分熔融，并富集Ni和PGE。 2）硫化物熔离的多阶段性是导致矿床类型变异的一个重要因素。早期结晶矿物的分离结晶导致了金宝山母岩浆出现S的饱和，少量的浸染状硫化物被携带进入岩浆通道中发生了沉淀，继续富集PGE，形成了金宝山矿体。杨柳坪的母岩浆先发生了少量早期硫化物熔离丢失，PGE弱亏损的岩浆在后期上升过程中由于强烈的地壳混染，发生了大量硫化物熔离并发生堆积，形成杨柳坪矿体。力马河和白马寨的母岩浆在早期发生了较多的硫化物丢失，PGE强烈亏损的岩浆发生了二次以上的硫化物熔离，形成了力马河和白马寨矿体。 3） R因子（岩浆与熔离硫化物的比例）是决定ELIP中Cu-Ni-PGE矿床矿化类型变异的重要因素。金宝山矿床具有极高的R值（＞10000），杨柳坪和朱布矿床具有中等的R值（2000~5000），而力马河矿床近似为在经过R=2000的硫化物熔离之后，残余岩浆再经过R=200的硫化物熔离。 4） 地壳混染程度的差异可能是造成ELIP中Ni-Cu-PGE矿床矿化类型发生变异的关键因素。金宝山矿床的地壳混染程度较低，可能主要是早期橄榄石和铬铁矿的分异结晶导致了岩浆中硫化物出现了饱和。对于大槽－阿布郎当矿化岩体，只是在岩体边缘的局部出现了硫化物熔离，可能是围岩混染造成的。对于杨柳坪Ni-Cu-PGE矿床、力马河和白马寨Ni-Cu矿床，从微量元素蛛网中明显的Nb-Ta负异常，高放射成因187Os丰度的初始Os同位素组成（γOs(t)=100~120），S同位素等反映出显著的地壳混染，因而出现大量硫化物熔离。

地幔柱与岩浆成矿-峨嵋山大火成岩省地震波速层物相解释及典型PGE矿床成岩成矿机制研究

地幔柱概念在19世纪60至70年代就被提出，但是由于板块构造理论在解释地球上岩浆活动的分布规律时取得了空前的成功，在当时这一理论是被排斥的。板块边界概念可以解释地球上绝大部分的岩浆产出，但在解释板内岩浆的成因时往往显得力不从心，尽管这些岩浆的体积只占地球岩浆总量的2％。地幔柱理论模型发展到现在得到不同学科的支持。地质学、地球化学、地球物理学、古生物学、比较行星学、实验岩石学等等都提供了直接或间接的证据，证明地幔柱几乎存在整个地：质历史时期。当前地幔柱理论中在地球化学领域有两大研究热点：高钦低钦玄武岩的起源以及地幔柱中是否存在循环俯冲洋壳物质。完全解决这些问题才可能深入系统地建立地慢柱成矿作用模型。现在已经建立了一些矿床类型与地慢柱作用的联系：如现在认为赋存在金伯利岩中的金刚石矿床的形成与地慢柱作用密不可分，一些岩浆硫化物矿床和岩浆氧化物矿床很显然是地慢柱岩浆作用形成的，如西伯利亚火成岩省的Noril'sk-Talnakh铜镍铂族元素矿床以及KeweenawaJI大陆裂谷体系的Dultlth杂岩体的Cu-Ni矿床。另外还有赋存在大型基性一超基性层状岩体中的PGE、Ni和cu矿床，如Great Dyke和布什维尔德杂岩体。一些超大型热液矿床也与地慢柱有可能的联系（Pirajno，2000）：如270oMa形成的超大型Kidd Creek火山成因块状硫化物矿床（Bleeker et al.，1 999；Wynan et al.，1999）和南澳大利亚1600Ma形成的超大型olymPicD翻矿床。本文的研究工作包含两方面内容：通过热力学计算峨眉山玄武岩在深部的结晶分异，对峨眉山大火成岩省的岩浆量分布和岩浆氧化物矿床（华Ti磁铁矿矿床）的分布以及下地壳高波速层的物相进行理论解释；对峨眉山大火成岩省金宝山PGE典型矿床进行成岩成矿的地球化学研究，预测整个大火成岩省的岩浆硫化物矿床产出位置。大多数峨眉山玄武岩的 MgO＜7％，Ni为4-232ppm，它们是原始岩浆结晶分异后的产物。峨眉山玄武岩省下地壳和上地幔之间存在厚度为：8-25km1，P彼速为7.1-7.8km／s的附加层（高地震波速层）。滇西地区出露的洲套第三纪富碱斑岩，地球化学和同位素研究表明斑岩的岩浆源是来自“壳一慢混合层”，源区的形成时代为220-25Ma，与峨眉山玄武岩的形成时代一致。所以有理由认为该附加层是由峨眉山玄武岩在此结晶分异形成的。与地慢柱有关的洋岛Hawaii、Marquesas Islands；海底高原Oniong Java、大陆火山岩省ColumbiaRiver Plateaus地震彼研究都表明在上地慢顶部有一高速附加层，Farnetani etal.（1996）的研歼表明高速附加层是由来自地幔柱的岩浆在此结晶分异形成的。玄武岩是一种混合的部分熔融产物，是不同成分的地幔橄榄岩在不同的压力下熔出的。这种降压熔融高温高压实验是做不到的。熔出的熔体成分是温度、压力及橄榄岩成分（源区）的函数，形成的岩浆是一个多压熔融的集合体。热力学计算能够较为精确地计算出生成的岩浆成分和约束岩浆产生的过程。岩浆的结晶分异也是同样的情形，尤其是分离结晶过程，实验岩石学是很精确难模拟其过程的。热力学计算使用的MELTS程序，MELTS适用范围很广，适用于模拟岩石熔融生成岩浆和岩浆的冷却结晶。现今峨眉山大火成岩省的地壳厚度为40恤，这被认为是后期褶皱加厚的缘故。根据峨眉山玄武岩中辉石斑晶成分和玄武岩本身成分计算出分异结晶的压力为6kb，那么当时的地壳厚度约为20km：选择氧逸度为QFM，这一氧逸度范围认为是大多数大陆溢流玄武岩结晶分异时的氧化还原环境。热力学计算结果通过峨眉山玄武岩成分进行约束和验证。Al2O3、NaZO＋K 20、CaO与MgO计算的演化趋势线与实际观察的演化符合较好，橄榄石和斜方辉石的结晶使得CaO随着MgO的降低而增高；当单斜辉石成为液相线矿物时，cao也随着Mgo的降低而降低了。单斜辉石在岩浆演化到MgO＝10．3％时成为液相线矿物。整个计算过程中斜长石未成为液相线矿物，这与大多数玄武岩不具有Eu异常是一致的，并月＿Al2O3随着MgO的减小单调增加也说明了这点。不过大多数峨眉山玄武岩常含有斜长石斑晶，这是低压下结晶分异的结果。由于斜长石密度小，所有很难与高铁玄武岩分离。整个计算的难点也是创新点是波速计算。通过分离的堆晶矿物组合中各种矿物的成分和质量分数计算的附加层波速比观察值高，不过堆积岩体常常会有残留岩浆存在矿物晶粒间，这样会降低岩石的压缩波速。大型基性一超基性岩体常常会残留有或者捕获5-30％的岩浆。假定两个高波速附加层分别捕获7叭，和巧％的残留岩浆，计算的结果就大体等于观察值。热力学和质量平衡计算研究表明：高地震波速层为橄榄辉石岩一辉石岩的巨型侵入岩体；峨眉山中岩区的岩浆量最大也符合含V-Ti磁铁矿矿床只产在中岩区，如太和、白马、攀枝花、红格等岩体；西岩区的岩浆量最小表明几乎没有可能在西岩区形成有规模的V-Ti磁铁矿矿床，实际观察仅仅只见到数量少而小的岩体；东岩区下地壳厚达20灿1的高波速层暗示东岩区上地壳的侵入岩体积也应该具有相当规模，应该是V－Ti磁铁矿矿床成矿区。目前在东岩区很少发现与峨眉山玄武岩有关的岩浆矿床的主要原因是：东岩区的剥蚀深度不够，没有可观的侵入岩体出露，而中岩区侵入岩都侵入在元古代地层中。按照质量平衡的计算方法，最保守的估算整个峨眉地慢柱岩浆事件产生的岩浆量为8.9*106km3，上地壳峨眉山玄武岩和侵入岩体积为3.9*106km3。如果按照初始覆盖面积5x106km2计算（与西伯利亚暗色岩初始覆盖面积相当），喷发高峰期为2Ma，计算的喷发速率为3.9km3／year。这并不亚于西伯利亚暗色岩的喷发速率4km3／year。这对于研究峨眉山大火成岩浆事件与二叠·三叠交界或end-QuadaluPian生物灭绝之间的可能联系具有重要意义。本文另一方面的研究工作是：首先系统地介绍了岩浆硫化物矿床的基本原理，然后通过金宝山PGE矿床实例研究，提出金宝山岩体成岩模式，并且对整个峨眉山大火成岩省的岩浆硫化物矿床产出位置进行理论预测。详细地球化学研究表明金宝山镁铁一超镁铁岩是峨眉山大火成岩省古老火山岩浆房的残留物。岩体主要由底部超镁铁岩和上部镁铁岩组成，两种岩石的质量大致相同。根据超镁铁岩的矿物组合计算的成岩时的氧逸度较高，热力学方法计算的成岩压力为2kb左右。超镁铁岩的包嵌结构和铁铁岩的微晶一细晶结构说明超镁铁岩为镁铁岩结晶的矿物堆积形成的。镁铁一超镁铁岩的蚀变程度不同以及Sc、Sr、Eu等元素在两类岩石中的不同特征指示了整个成岩过程。金宝山岩体的原始岩浆 MgO=8％说明高镁玄武岩并不是形成PGE矿床的必要条件。金宝山的成岩模式是：在火山喷发前，岩浆侵位时橄榄石和少量铬尖晶石先结晶，沉淀在岩浆房底部；随后结晶的是斜方辉石和斜长石，斜方辉石也沉淀在岩浆房底部，斜长石由于密度较小集中中岩浆房上部，岩浆房的中部是：少量的斜长石小斑晶。由于斜方辉石和斜长石的结晶，这样岩浆中的Sc、Sr和Eu就会亏损，也是岩浆房底部堆积岩的原始捕获岩浆。火山喷发后，由于压力的突然降低，岩浆房底部的堆晶会发生再熔融，几乎消耗掉所有的斜方辉石，橄榄石也呈熔蚀状浑圆形态，重新熔融的斜方辉石导致超镁铁岩中残留岩浆比原始捕获岩浆更加富Sc，这种岩浆由于富MgO和在快速冷却的环境下同时结晶，最终形成光性方位一致的单刹辉石。喷发后岩浆房空间的剩余导致围岩-灰岩进入，造成岩浆房中剩余岩浆强烈的碳酸盐化。峨眉山玄武岩Cr-Mg#的相关关系定义一条正常玄武岩演化线。大多数这些玄武岩的Ni也保持了这种演化关系，其中低钦玄武岩和过渡型高钦玄武岩Ni-Mg＃相关关系远离了正常演化线，这些玄武岩的Cu-Mg#相关关系也有类似的情形。峨眉山低钦和过渡类型高钦玄武岩Ni和 Cu的非正常亏损，表明它们在地表下经历了硫饱和事件。金宝山岩浆硫化物矿床成岩模型的建立，为在整个大火成岩省寻找岩浆硫化物矿床提供了一种新认识。低钦和过渡型高钦玄武岩的古老火山口下部是岩浆硫化物矿床的所在地。

A Trabecular Bone Explant Model of Osteocyte–Osteoblast Co-Culture for Bone Mechanobiology

The osteocyte network is recognized as the major mechanical sensor in the bone remodeling process, and osteocyte-osteoblast communication acts as an important mediator in the coordination of bone formation and turnover. In this study, we developed a novel 3D trabecular bone explant co-culture model that allows live osteocytes situated in their native extracellular matrix environment to be interconnected with seeded osteoblasts on the bone surface. Using a low-level medium perfusion system, the viability of in situ osteocytes in bone explants was maintained for up to 4 weeks, and functional gap junction intercellular communication (GJIC) was successfully established between osteocytes and seeded primary osteoblasts. Using this novel co-culture model, the effects of dynamic deformational loading, GJIC, and prostaglandin E-2 (PGE(2)) release on functional bone adaptation were further investigated. The results showed that dynamical deformational loading can significantly increase the PGE(2) release by bone cells, bone formation, and the apparent elastic modulus of bone explants. However, the inhibition of gap junctions or the PGE(2) pathway dramatically attenuated the effects of mechanical loading. This 3D trabecular bone explant co-culture model has great potential to fill in the critical gap in knowledge regarding the role of osteocytes as a mechano-sensor and how osteocytes transmit signals to regulate osteoblasts function and skeletal integrity as reflected in its mechanical properties.

Fluid flow induced calcium response in bone cell network

In our previous work, bone cell networks with controlled spacing and functional intercellular gap junctions had been successfully established by using microcontact printing and self assembled monolayers technologies [Guo, X. E., E. Takai, X. Jiang, Q. Xu, G. M. Whitesides, J. T. Yardley, C. T. Hung, E. M. Chow, T. Hantschel, and K. D. Costa. Mol. Cell. Biomech. 3:95-107, 2006]. The present study investigated the calcium response and the underlying signaling pathways in patterned bone cell networks exposed to a steady fluid flow. The glass slides with cell networks were separated into eight groups for treatment with specific pharmacological agents that inhibit pathways significant in bone cell calcium signaling. The calcium transients of the network were recorded and quantitatively evaluated with a set of network parameters. The results showed that 18 alpha-GA (gap junction blocker), suramin (ATP inhibitor), and thapsigargin (depleting intracellular calcium stores) significantly reduced the occurrence of multiple calcium peaks, which were visually obvious in the untreated group. The number of responsive peaks also decreased slightly yet significantly when either the COX-2/PGE(2) or the NOS/nitric oxide pathway was disrupted. Different from all other groups, cells treated with 18 alpha-GA maintained a high concentration of intracellular calcium following the first peak. In the absence of calcium in the culture medium, the intracellular calcium concentration decreased slowly with fluid flow without any calcium transients observed. These findings have identified important factors in the flow mediated calcium signaling of bone cells within a patterned network.

Co-electrospun poly(lactide-co-glycolide), gelatin, and elastin blends for tissue engineering scaffolds

In this study, we describe composite scaffolds composed of synthetic and natural materials with physicochemical properties suitable for tissue engineering applications. Fibrous scaffolds were co-electrospun from a blend of a synthetic biodegradable polymer (poly(lactic-co-glycolic acid), PLGA, 10% solution) and two natural proteins, gelatin (denatured collagen, 8% solution) and (x-elastin (20% solution) at ratios of 3:1:2 and 2:2:2 (v/v/v). The resulting PLGA-gelatin-elastin (PGE) fibers were homogeneous in appearance with an average diameter of 380 80 mn, which was considerably smaller than fibers made under identical conditions from the starting materials (PLGA, 780 +/- 200 nm; gelatin, 447 +/- 1.23 nm; elastin, 1060 170 nm). Upon hydration, PGE fibers swelled to an average fiber diameter of 963 +/- 132 nm, but did not disintegrate. Importantly, PGE scaffolds were stable in an aqueous environment without crosslinking, and were more elastic than those made of pure elastin fibers. To investigate the cytocompatibility of PGE, we cultured H9c2 rat cardiac myoblasts and rat bone marrow stromal cells (BMSCs) on fibrous PGE scaffolds. We found that myoblasts grew equally as well or slightly better on the scaffolds than on tissue-culture plastic. Microscopic evaluation confirmed that myoblasts reached confluence on the scaffold surfaces while simultaneously growing into the scaffolds.

太平洋富钴结壳稀有气体地球化学特征及其成矿指示意义

中西太平洋富钴结壳稀有气体核素含量和同位素组成具有明显的区域性特征。依其He同位素比值与大洋中脊玄武岩（MORB）He同位素比值的相对大小，可将富钴结壳分为低3He/4He型和高3He/4He型两类，麦哲伦海山、马尔库斯-威克海岭、马绍尔群岛海山链和中太平洋海山产出低3He/4He型结壳，莱恩群岛海山链产出高3He/4He型结壳。 富钴结壳稀有气体以下地幔来源为主，低3He/4He型与高3He/4He型结壳稀有气体特征的差异是二者产出海山链下地幔源区类型不同的表现。低3He/4He型结壳中的稀有气体主要来自受俯冲再循环大洋地壳影响的HIMU型地幔源区，高3He/4He型结壳中的稀有气体主要来自受捕获大气组分沉积物再循环作用影响的EM型地幔源区。地幔源区类型的差异是引起两类结壳稀有气体组成差异的根本原因。 富钴结壳铂族元素（PGE）特征随海山链而变化，PGE各元素之间也有明显的分异，暗示了结壳PGE来源的多样性和富集机制的差异性。地外物质对富钴结壳PGE的贡献有限，富钴结壳PGE主要来自海底幔源岩石的蚀变作用和陆源物质输入。PGE来源印证了富钴结壳稀有气体的地幔来源说。 大洋岛屿玄武岩（OIB）低温蚀变作用研究和质量平衡理论计算表明，OIB低温蚀变作用为海水提供了大量金属，OIB是富钴结壳重要的矿源场。地幔在富钴结壳成矿中起着重要的作用。

东天山镁铁-超镁铁岩铜镍硫化物矿床通道式成矿机制与岩体含矿性评价研究

A mafic-ultramafic complex belt well developed in Eastern Tianshan, Xinjiang, NW China, which contains a series of Cu-Ni sulfide deposits. This area is the important production basis for Cu-Ni deposits, including Tulargen deposit, Hulu deposit, Huangshan-Huangshandong deposit, Hulu deposit, Xiangshan deposit, Tianyu deposit, Chuanzhu deposit. In China, especially Eastern Tianshan, it is prevalent that large Cu-Ni deposits occurred in small intrusions, typically including Jinchuan, Kalatongke, et al., so the ore-forming mechanism and evaluation rule for those small intrusions are very meaningful and of universal significance. On the basis of the research to typical Cu-Ni deposits, ore-forming conditions and processes are summarized through which to evaluate the ore-bearing potential for barren intrusions and unexplored mafic-ultramafic intrusions. By the contrast, metallogenic rule and mechanism of ore genesis are concluded, and evaluation system is preliminarily set up on the basis of these conclusions. Quantitatively simulation for the composition of olivine is introduced for the first time in China to discuss the interaction between magma and sulfide, and a new method to calculate the Mg-Fe composition of primitive magma is developed. Interaction between magma and sulfide liquid is used to get the Ni content in sulfide liquid. Sulfur isotopic characteristics in sulfide minerals in country rocks and ores are used to judge crustal sulfur introduction, which is applied for the first time in China. Re-Os isotopic characteristics are related to the ore-forming process, to interpret the process of enrichment of chalcophile elements. On the basis of the evaluation system, Mati, Chuanzhu, Luodong, Xiadong, those intrusions are evaluated to their ore-bearing potential. According to the studies to typical Cu-Ni deposits, conduit-type ore-forming model is set up, and the characteristics of the model are concluded systematically. The evaluation system and conduit-type ore-forming model can be helpful to the evaluation of mafic-ultramafic intrusions in this and similar mafic-ultramafic intrusion belts. The studied typical deposits and mafic-ultramafic intrusion include Tulargen deposit, Hulu deposit, Huangshandong deposit, Chuanzhu deposit, Mati intrusion，Luodong intrusion, Xiadong intrusion, and others. Through studies, there are similar characteristics for Tulargen and Hulu deposits in magma origin, composition of primitive magma（MgO=12.5%, FeO=12% and MgO=11%, FeO=10.5% respectively）, magma evolution, mechanism of sulfide segregation and conduit-type ore-forming process. By Re-Os isotopic system, the ore forming date of Tulargen deposit is 265.6±9.2Ma, which is consistent to regional metallogenic event, but little younger. The Mg-Fe composition of primitive magma of Baishiquan, Huangshandong area, Kalatongke is lower than that of Tulargen and Hulu deposit, showing common basalt composition. The Mg# value（Mg#=(Mg/Mg+Fe）increases gradually from Kalatongke to Baishiquan to Huangshan-Huangshandong East. Baishiquan intrusions show relatively higher crustal contamination by evidence of trace element, which indicates the lower magma original source, from depleted mantle to crust. One break is the discovery of komatiitic intrusion, Xiadong intrusion, which shows characteristics of highly magnesium (Max Fo=96). The primitive magma is calculated of MgO=28%，FeO=9%, belonging to komatiitic magma. Tectonic evolution of Eastern Tianshan is discussed. By the statistics of ore-forming data of porphyry copper deposits, magmatic sulfide Cu-Ni deposits, orogenic hydrothermal gold deposits, we believe that those deposits are the successive products of oceanic subduction, are and back-arc basin collision and post-orogenic extention. And Cu-Ni sulfide deposits and orogenic gold deposits occurred in the stage of post-orogenic extention. According to the conclusions, the conduit-type ore-forming mechanism of magmatic sulfide deposit is set up, and its characteristics and conditions are concluded as well. The conduit-type ore-forming system includes magma generation, sulfide segregation, enrichment of chalcophile elements, interaction of sulfide and magma, sulfide collection in limited space in magma conduit and bottom of the chamber, which make a whole ore-forming system.The ore-forming process of Cu-Ni sulfide deposits is concluded as three steps: 1. mantle derived magma rises upward to the middle-upper crust; 2. magma suffers crustal contamination of different degrees and assimilates crustal sulfur, which leads to sulfur saturation and sulfide segregation. Sulfide liquid interacts with magma and concentrates chalcophile elements; 3. enriched sulfide located in the conduit(Tulargen) or bottom of the chamber (Hulu). Depleted magma rises upward continuously to form barren complexes. For the practical cases, Tulargen deposit represents the feeding conduit, and Hulu deposit represents the bottom of the staging magma chamber. So the deeper of west of Tulargen and southwest of Hulu are the favorite locate for ore location. The evaluation for ore potential can be summarized as follows: (1) Olivine can be served as indicator for magma evolution and events of sulfide segregation; (2) Sulfur isotopic characteristics is an efficient method to judge sulfur origin for magmatic sulfide deposit; (3) Re-Os content of the ores can indicate interaction between sulfide and silicate magma and crustal contamination; (4) PGE mineralization is effected by degree of partial melting of mantle; (5) Cu/Zr is efficient parameter to judge sulfide segregation; (6) The effects of multiple magma fractionation and emplacement are important, for inverse order shows the destruction to previous solid lithofacies and orebodies. Mati, Chuanzhu, Xiadong, Luodong, mafic-ultramafic intrusions are evaluated using evaluation system above. Remarkable Ni depletion is found in olivine of Mati, and southwest of the intrusion can be hopeful location for ore location. Chuanzhu intrusion has remarkable evidence of sulfide segregation, but the intrusion represents the narrow feeder conduit, so the wide part of the conduit maybe the favorite location for sulfide to deposit. The ore potential of Luodong and Xiadong is not good. Both the intrusions show no Ni depletion in olivine, and there is no sulfide in country rocks, so no crustal sulfur is added into the magmatic system. For Sidingheishan, a very large intrusion, the phenomenon of sulfide segregation is found, but there are no favorite places for sulfide to deposit. So the Cu-Ni ore potential maybe not good, but PGE mineralization should be evaluated further.

铂族元素分析方法研究及其在有关地质问题中的应用

Characterization of Platinum Group Elements (PGE) has been applied to earth, space and environmental sciences. However, all these applications are based on a basic prerequisite, i.e. their concentration or ratio in the research objects can be accurately and precisely determined. In fact, development in these related studies is a great challenge to the analytical chemistry of the PGE because their content in the geological sample (non-mineralized) is often extremely low, range from ppt (10~(-12)g/g) to ppt (10~(-9)g/g). Their distribution is highly heterogeneous, usually concentrating in single particle or phase. Therefore, the accurate determination of these elements remains a problem in analytical chemistry and it obstructs the research on geochemistry of PGE. A great effort has been made in scientific community to reliable determining of very low amounts of PGE, which has been focused on to reduce the level of background in used reagents and to solve probable heterogeneity of PGE in samples. Undoubtedly, the fire-assay method is one of the best ways for solving the heterogeneity, as a large amount of sample weight (10-50g) can be hold. This page is mainly aimed at development of the methodology on separation, concentration and determination of the ultra-trace PGE in the rock and peat samples, and then they are applied to study the trace of PGE in ophiolite suite, in Kudi, West Kunlun and Tunguska explosion in 1908. The achievements of the study are summarized as follows: 1. A PGE lab is established in the Laboratory of Lithosphere Tectonic Evolution, IGG, CAS. 2. A modified method of determination of PGE in geological samples using NiS Fire-Assay with inductively coupled plasma-mass spectrometry (ICP-MS) is set up. The technical improvements are made as following: (1) investigating the level of background in used reagents, and finding the contents of Au, Pt and Pd in carbonyl nickel powder are 30, 0.6 and 0.6ng/g, respectively and 0.35, 7.5 and 6.4ng, respectively in other flux, and the contents of Ru, Rh, Os in whole reagents used are very low (below or near the detection limits of ICP-MS); (2) measuring the recoveries of PGE using different collector (Ni+S) and finding 1.5g of carbonyl nickel is effective for recovering the PGE for 15g samples (recoveries are more than 90%), reducing the inherent blank value due to impurities reagents; (3) direct dissolving nickel button in Teflon bomb and using Te-precipitation, so reducing the loss of PGE during preconcentration process and improving the recoveries of PGE (above 60% for Os and 93.6-106.3% for other PGE, using 2g carbonyl nickel); (4) simplifying the procedure of analyzing Osmium; (5)method detection limits are 8.6, 4.8, 43, 2.4, 82pg/g for 15g sample size ofRu, Rh, Pd, Ir, Pt, respectively. 3. An analytical method is set up to determine the content of ultra-trace PGE in peat samples. The method detection limits are 0.06, 0.1, 0.001, 0.001 and 0.002ng/mL for Ru, Rh, Pd, Ir and Pt, respectively. 4. Distinct anomaly of Pd and Os are firstly found in the peat sampling near the Tunguska explosion site, using the analytical method. 5. Applying the method to the study on the origin of Tunguska explosion and making the following conclusions: (1) these excess elements were likely resulted from the Tunguska Cosmic Body (TCB) explosion of 1908. (2) The Tunguska explosive body was composed of materials (solid components) similar to C1 chondrite, and, most probably, a cometary object, which weighed more than 10~7 tons and had a radius of more than 126 m. 6. The analysis method about ultra-trace PGE in rock samples is successfully used in the study on the characteristic of PGE in Kudi ophiolite suite and the following conclusions are made: (1) The difference of the mantle normalization of PGE patterns between dunite, harzburgite and lherzolite in Kudi indicates that they are residual of multi-stage partial melt of the mantle. Their depletion of Ir at a similar degree probably indicates the existence of an upper mantle depleted Ir. (2) With the evolution of the magma produced by the partial melt of the mantle, strong differentiation has been shown between IPGE and PPGE; and the differentiation from pyroxenite to basalt would have been more and more distinct. (3) The magma forming ophiolite in Kudi probably suffered S-saturation process.

攀西地区红格、新街岩体的岩石地球化学特征

The mafic-ultramafic layered intrusions in the Panxi, China contain large V-Ti-magnetite deposits. These layered intrusions are related with the Emeishan continental flood basalts in space and time. Two layered intrusions, Hongge and Xinjie have clear PGE mineralization at the base of the intrusions. Thus the detailed investigations of these two intrusions not only have a geological but also have an economic significance. This thesis aims to characterize the elemental and Sr-Nd isotopic features of diverse rock zones within the intrusion on the basis of systematic studies of the major, trace element and isotope ratios, therefore to constrain the petrogenesis, mantle source and evolution of the Hongge and Xinjie intrusions. Generally, both Hongge and Xinjie intrusions show the same Fe-Ti-rich and Si-M-poor characteristics. They are also enriched in rare-earth elements (REE) and large-ion lithophile elements (LILE) as well as in Sr-Nd isotope ratios (Hongge: initial Sr = 0.7056-0.7076, ε_(Nd)(t) and (Nd/Sm)_N-ε_(Nd)(t) plots, the Hongge intrusion has a similar elemental and isotopic features to the Emeishan low-Ti (LT) basalts, whereas the Xinjie intrusion was close to the Emeishan high-Ti (HT) basalt. Therefore, the Hongge intrusion may be co-genetic with the LT basalt, formed by the partial melting of the spinel-garnet transition mantle that had a slight enriched isotope character. In contrast, the Xinjie intrusion and the HT basalts are probably derived from the garnet-phases mantle with a primitive isotope character. The involvement of the components of mantle wedge into the source is considered to be the major reason of the REE and LILE enrichment and Nd isotope depletion in the Xinjie intrusion. In contrast with the systematic variations in TiO_2 content, Mg#, transition elements (Ni, Cu, Co), REE concentrations, and La/Yb, La/Sm ratios from the lower zone to upper zone, the different rock zones of the Hongge intrusion have no clear Sr-Nd isotope variations. This suggests that the Hongge intrusions were formed by the crystal fractionation from the same magma source. The rhythm may be formed by slow injection of the co-genetic magma during the crystal fractionation. The increase in K_2O and Al_2O_3 contents, REE abundance, and the degree of the REE fractionation in the base of the intrusion, together with the relatively low ε_(Nd)(t) value, may imply that the base of the Hongge intrusion was contaminated with the local crust rocks. Xinjie intrusion shows the clearly elemental and isotopic differences in diverse cumulus cycles. The observation of the systematic variations in TiO_2 content, Mg# value, transition elements (Ni, Cu, Co), REE concentrations, and La/Yb, La/Sm ratios in first cycle was not occurred in second cumulus cycle. In addition, the ε_(Nd)(t) value in second cumulus cycle is apparently higher than that of the first one. Thus the abruptly elemental and isotopic changes at the base of second cycle demonstrate that there is considerable new and depleted magma addition to the residue magma after the crystallization of the first cycle. These features are very similar to those of the well-known PGE-rich Bushveld and Stillwater layered intrusions. The PGE mineralization in Xinjie intrusion is much better than in Hongge intrusion. Therefore, the layered intrusion similar to the Xinjie in Panxi area posses the better prospects for the PGE deposits.