24 resultados para Neck Flexors
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
The mechanical deformations of nickel nanowire subjected to uniaxial tensile strain at 300 K are simulated by using molecular dynamics with the quantum corrected Sutten-Chen many-body force field. We have used common neighbor analysis method to investigate the structural evolution of Ni nanowire during the elongation process. For the strain rate of 0.1%/ps, the elastic limit is up to about 11% strain with the yield stress of 8.6 GPa. At the elastic stage, the deformation is carried mainly through the uniform elongation of the distances between the layers (perpendicular to the Z-axis) while the atomic structure remains basically unchanged. With further strain, the slips in the {111} planes start to take place in order to accommodate the applied strain to carry the deformation partially, and subsequently the neck forms. The atomic rearrangements in the neck region result in a zigzag change in the stress-strain curve; the atomic structures beyond the region, however, have no significant changes. With the strain close to the point of the breaking, we observe the formation of a one-atom thick necklace in Ni nanowire. The strain rates have no significant effect on the deformation mechanism, but have some influence on the yield stress, the elastic limit, and the fracture strain of the nanowire.
Resumo:
提出了一种新型的测试结构,对面积为微米量级下键合的最大抗扭强度进行了测试) 实验设计一系列的单晶硅悬臂梁结构测试键合面积在微米量级时的最大剪切力,键合面为常用的矩形其边长从*!+ 到!#$!+,并根据实际移动距离计算得出的最大剪切力) 并实验实际得出最大剪切扭矩和相应的键合面积的曲线,以及最大扭转剪切破坏应力与悬臂梁加载距离的关系,并针对*$!+, *$!+ 的矩形键合结构进行了加载和位移的重复性实验测量,两次测量结果符合较好) 微电子机械系统(+-./0121.3/0+1.456-.52 78731+,9:9;)器件的设计人员可以根据结论曲线,针对所需的抗扭强度设计相应的键合面积,为9:9; 器件工艺的在线定量测试与设计提供参考)
Resumo:
We present the analysis of uniaxial deformation of nickel nanowires using molecular dynamics simulations, and address the strain rate effects on mechanical responses and deformation behavior. The applied strain rate is ranging from 1 x 10(8) s(-1) to 1.4 x 10(11) s(-1). The results show that two critical strain rates, i.e., 5 x 10(9) s(-1) and 8 x 10(10) s(-1), are observed to play a pivotal role in switching between plastic deformation modes. At strain rate below 5 x 10(9) s(-1), Ni nanowire maintains its crystalline structure with neck occurring at the end of loading, and the plastic deformation is characterized by {111} slippages associated with Shockley partial dislocations and rearrangements of atoms close to necking region. At strain rate above 8x10(10) s(-1), Ni nanowire transforms from a fcc crystal into a completely amorphous state once beyond the yield point, and hereafter it deforms uniformly without obvious necking until the end of simulation. For strain rate between 5 x 10(9) s(-1) and 8 x 10(10) s(-1), only part of the nanowire exhibits amorphous state after yielding while the other part remains crystalline state. Both the {111} slippages in ordered region and homogenous deformation in amorphous region contribute to the plastic deformation. (C) 2007 Published by Elsevier B.V.
Resumo:
The melting process of nickel nanowires are simulated by using molecular dynamics with the quantum Sutten-Chen many-body force field. The wires studied were approximately cylindrical in cross-section and periodic boundary conditions were applied along their length; the atoms were arranged initially in a face-centred cubic structure with the [0 0 1] direction parallel to the long axis of the wire. The size effects of the nanowires on the melting temperatures are investigated. We find that for the nanoscale regime, the melting temperatures of Ni nanowires are much lower than that of the bulk and are linear with the reciprocal of the diameter of the nanowire. When a nanowire is heated up above the melting temperature, the neck of the nanowire begins to arise and the diameter of neck decreases rapidly with the equilibrated running time. Finally, the breaking of nanowire arises, which leads to the formation of the spherical clusters. (C) 2004 Elsevier B.V. All rights reserved.
Resumo:
About 336-444 bp mitochondrial D-loop region and tRNA gene were sequenced for 40 individuals of the giant panda which were collected from Mabian, Meigu, Yuexi, Baoxing, Pingwu, Qingchuan, Nanping and Baishuijiang, respectively. 9 haplotypes were found in 21 founders. The results showed that the giant panda has low genetic variations, and that there is no notable genetic isolation among geographical populations. The ancestor of the living giant panda population perhaps appeared in the late Pleistocene, and unfortunately, might have suffered bottle-neck attacks. Afterwards, its genetic diversity seemed to recover to same extent.
Resumo:
Khawia saurogobii n. sp. is described from the intestine of the cyprinid fishes Saurogobio dabryi and Saurogobio dumerili in China. The new species belongs to the Lytocestidae and is placed in Khawia because of its afossate scolex, vitelline follicles in the cortical parenchyma, uterus not looping anterior to the cirrus sac, gonopores separate but close together in distinct genital atrium, external seminal vesicle absent, and postovarian follicles present. The new species differs from other congeneric species by the shape of the body markedly tapering posteriorly from the end of the anterior third, the shape of the scolex that is very short and markedly wider than the neck, spatulate without incisions, but shallow superficial grooves, vitelline follicles and testes starting immediately posterior to the scolex, and an ovary with long, posterior arms bent medially, thus giving the shape of an inverted A.
Resumo:
P>Semen sample was collected from two captive adult Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis) during physical examination. One individual was aged about 9 years with body length 143 cm (total length) and body weight 46.1 kg in 2003. The age of the other was unknown and its body length was 147 cm and body weight was 43 kg in 2004. Ultrastructure of their spermatozoa was examined using scanning and transmission electron microscope. The sperm concentration was 4.17 x 10(9) spermatozoa per ml by the cytometer. The approximate dimensions of the spermatozoa were as follows: head length, 3.366 +/- 0.140 mu m (mean +/- SE, n = 15); head width, 1.896 +/- 0.099 mu m (n = 15); and neck length, 1.004 +/- 0.074 mu m (n = 10). The tail included midpiece, principal piece and terminal piece. The length of the midpiece was 1.882 +/- 0.077 mu m (n = 9). There is no apparent boundary between the principal piece and the terminal piece, so the length of the principal piece and the terminal piece was 44.612 +/- 3.485 mu m (n = 5). Total length of the spermatozoa was 53.314 +/- 4.580 mu m (n = 10). The acrosome covered approximately 45.8% of the anterior portion of the head.
Resumo:
Testate amoebae are an important and abundant component of aquatic ecosystems. Our knowledge of their distribution and the species inventory in Asia is still limited. This paper describes a new planktonic Difflugia from Lake Mulan, province of Hubei, China. These findings are of taxonomic, as well as biogeographic significance because Difflugia mulanensis nov. spec. is a rare and perhaps the only locally distributed member of the well-known urceolate division within this most species-rich genus of lobose testate amoebae. We have studied its morphology and biometry with light and scanning electron microscopical methods. D. mulanensis differs from related species by its very large wide funnel-shaped apertural collar which normally exceeds the width of the test, a relatively long neck, its rounded apical end and the presence of only one nucleus. All shell parameters are normally distributed with low variability. Only the collar height is more variable. This shows that D. mulanensis is a size-monomorphic species. (c) 2005 Elsevier GrnbH. All rights reserved.
Resumo:
The freshwater testate amoeba Difflugia biwae Kawamura, 1918, isolated from Mulan Lake, Hubei Province, China is investigated using light microscopy and scanning electron microscopy. The morphology, biometry and distribution of this little known species are supplied. After careful comparison with three other similar species, including D. delicatula Gauthier-Livre et Thomas, D. elegans Penard and D. oblonga caudata Stepanek, we believe that the characteristics of smooth fusiform shell, conspicuous great collar flare (always larger than body-width) around the aperture, constriction behind the aperture and a somewhat curved aboral horn set D. biwae apart from all other Difflugia species. This species shows a great diversity in total length, collar height and aboral horn length which have high variability (CV between 11.76 and 24.52). However, body width, collar diameter, neck width, body length and aperture diameter are fairly constant with low variability (CV between 5.34 and 8.79) which shows a remarkable uniformity of D. biwae. Also, the size frequency distributions of both body width and body length yield bell-shaped (normally distributed) curves and indicate that D. biwae is a size-monomorphic species, characterized by a main-size class and a small size range. D. biwae is probably endemic to East Asia (China and Japan) because it has such a large size (165-306 mu m) that it would have been easily found in Europe and North America, if it were there. Consequently, D. biwae must have a restricted geographical distribution, disproving the old hypothesis that microscopic organisms are cosmopolitan.
Resumo:
Two species of aspidogastreans, namely Aspidogaster ijimai and A. conchicola, were studied by scanning electron microscopy. In nine lakes and an old river course, the Tian'ezhou oxbow, investigated in the flood plain of the Yangtze River, A. ijimai was obtained from the common carp (Cyprinus carpio) in three lakes, and A. conchicola from the black carp Mylopharyngodon piceus in three lakes and the oxbow. In none of the localities, however, were the two species found together. It is suggested that A. ijimai may be considered as a specialist parasite for the common carp, at least in the flood-plain lakes of the Yangtze River. The two parasites were similar in many aspects of their morphology. Their bodies can both be separated into a dorsal part and a ventral disc, with the body surface of the dorsal part elevated by transverse folds, and the disc subdivided into alveoli by transverse and longitudinal septa, although the number of alveoli was different in the two species. The depression on the ventral surface of the neck region was prominent for both species, and their ventral disc was covered densely with non-ciliated bulbous papillae. The position of mouth, osmo-regulatory pore and marginal organ was also similar for A. ijimai and A. conchicola. However, microridges in the trough of the folds in the neck region and numerous small pits on the upper part of the septa were found exclusively in A. ijimai, but uniciliated sensory papillae in A. conchicola.
Resumo:
An enclosure experiment was carried out to test trophic cascade effect of filter-feeding fish on the ecosystem: growth of crustacean zooplankton, and possible mechanism of changes of crustacean community structure. Four fish biomass levels were set as follows: 0, 116, 176 and 316 g m(-2), and lake water ( containing ca. 190 g m(-2) of filter-feeding fishes) was comparatively monitored. Nutrient levels were high in all treatments during the experiment. Lowest algal biomass were measured in fishless treatment. Algal biomass decreased during days 21-56 as a function of fish biomass in treatments of low (LF), medium (MF) and high (HF) fish biomass. Crustaceans biomass decreased with increasing fish biomass. Small-bodied cladocerans, Moina micrura, Diaphanosoma brachyurum and Scapholeberis kingii survived when fish biomass was high whilst, large-bodied cladocerans Daphnia spp. and the cyclopoids Theromcyclops taihokuensis, T. brevifuratus, Mescyclops notius and Cyclops vicinus were abundant only in NF enclosures. Evasive calanoid Sinodiaptomus sarsi was significantly enhanced in LF, but decreased significantly with further increase of fish biomass. Demographic data indicated that M. micrura was well developed in all treatments. Our study indicates that algal biomass might be controlled by silver carp biomass in eutrophic environment. Changes of crustacean community are probably affected by the age of the first generation of species. Species with short generation time were dominant and species with long generation time survived less with high fish biomass. Evasive calanoids hardly developed in treatments with high fish biomass because of the ( bottle neck) effect of nauplii. Species abundance were positively related to fish predation avoidance. Other than direct predation, zooplankton might also be suppressed by filter-feeding fish via competition.
Resumo:
依据线粒体上ND2和CO1两个变异较大的基因序列分析了香港地区香港湍蛙7种群、华南湍蛙1种群,以及大陆其他地区华南湍蛙7种群,戴云湍蛙1种群,武夷湍蛙1种群的系统发育关系,进而探讨香港湍蛙的遗传多样性、香港湍蛙特有性、如何确定香港湍蛙最佳保护单元以及这四种湍蛙的物种分类地位。
1. 香港湍蛙保护遗传学研究
香港湍蛙核苷酸传多样性较低,从其遗传多样性信息、单倍型网络分析、中性检验值以及岐点分布结果一致显示香港湍蛙很可能经历了瓶颈后的扩张,种群正在由一个较小的有效种群大小迅速增长, 有足够的时间通过变异用于积累单倍型的多态性, 而对于提高核苷酸多样化而言, 时间尚短(Nei M et al,1975,Avise J C,2000;李明等,2003)。
分子变异分析结果显示香港湍蛙种群间存在较多的基因交流,且系统发育树上各种群间交叉在一起,没有形成与地理单元相关的分支,而从其单倍型网络看,他们源于共同的祖先,是一个单系群,与地理单元间没有形成显著的遗传分化。因此应作为一个进化显著单元(ESU)。结合其与其他湍蛙发育关系及遗传距离以及野外采集信息认为香港湍蛙只在香港地区有分布,属于香港特有种。该物种内遗传多样性较低,又属于世界自然保护联盟红皮书中的近危种,同时也是《野生动物保护条例》中的受保护野生动物,且由于香港城市建设等使得其栖息环境受到威胁,因此在香港特别行政区应该受到重点保护。
从单倍型分布和核苷酸多样性可以看出大榄涌种群和城门种群具有较高的单倍型多样性和核苷酸多样性,应该作为保护的重点区域。
2. 华南湍蛙东、南沿海种群间系统关系
华南湍蛙分布广,各种群存在着丰富的遗传多样性信息且中部种群广西龙胜和湖南张家界种群核苷酸多样性明显高于其他边缘种群华南湍蛙。种群间几乎没有基因交流,且各种群间无共享单倍型,可见已形成了显著的遗传分化。各种群间遗传距离都较远,其中广东南昆山种群以及福建三港种群与其他种群距离最远,因此可以推测其他种群(广东深圳、香港大屿山、广西龙胜和防城以及湖南张家界种群)可能为独立进化的种群。但是否是一新种或一隐存种,还需要结合形态学进行更深入的研究。
本研究中无论从系统关系看还是从遗传距离看,大屿山种群与深圳种群最近,支持陈坚峰等将其定为华南湍蛙,即华南湍蛙新增一个分布点:香港大屿山。
系统树上广西防城种群(支B)与龙胜和湖南种群(支A)形成姐妹群。香港大屿山种群与深圳种群先形成姐妹群(支C),但却没有与其距离很近的广东南岭及南昆山种群(支D)形成姐妹群,可能粤北和粤中的环境及气候较复杂因此与粤南其他种群形成了明显的隔离。同时可以看出华南湍蛙种群遗传分化与地理距离没有显著的相关性。
3. 四种湍蛙间的系统关系
根据线粒体CO1基因建立四种湍蛙间的系统关系及其遗传距离,很清楚地看到,香港湍蛙与戴云湍蛙关系很近,而华南湍蛙则与武夷湍蛙较近。然而,戴云湍蛙同一个种群内部共有两个单倍型DY1和DY2,且两个单倍型间遗传距离大于DY1与香港湍蛙间遗传距离,更远远大于香港湍蛙种群内部的距离,即戴云湍蛙内部两个单倍型间遗传距离达到了种级水平,同样在系统发育树上这两个单倍型与香港湍蛙形成并系。但是,戴云湍蛙种内在形态上差异不显著。因此,其是否属于萌芽物种分化形成(budding speciation)或已经完全分化为两个不同的种值得进一步研究?
与戴云湍蛙香港湍蛙关系类似,从系统树上看华南湍蛙不形成单系,而是分成两个大支,与武夷湍蛙形成并系,且福建和南昆山的华南湍蛙与武夷湍蛙遗传距离远大于武夷湍蛙种内福建种群与浙江种群的遗传距离,达到了种级分化水平。由此,可以推断武夷湍蛙是有效种。系统树上广东深圳、香港大屿山、广西防城和龙胜以及湖南张家界种群与华南湍蛙福建及南昆山各种群间遗传距离已超出了种内各种群间的遗传距离,但是至于这一支是否应为另外一个种,有必要扩大采样,并结合核基因及形态信息进行进一步研究。
MtDNA of ND2 and CO1 gene were used to investigate genetic diversity of Amolops in Hongkong .We collected seven populations of A. hongkongensis,,one population of A.ricketti from Hong Kong and other seven populations of A.ricketti from East and South of Chinese mainland. As well as one population of A. daiyunensis and one population of A.wuyiensis Phylogenetic relationship were analyzed of four species. Discussed whether A.hongkongensis is an endemic species and how can we make the conservation and management decisions.
1. Conservation Genetics of A. hongkongensis
A. hongkongensis has a low nucleotide diversity, the results of genetic diversity, haplotype network, neutrality test and the mismatch distributions indicate that A. hongkongensis experienced a recent expansion after a bottle neck. They had enough time to accumulated haplotype diversity, but it’s too short to have a high nucleotide diversity(Nei M et al,1975,Avise J C,2000;Li et al,2003).
The result of AMOVA reveals that it has much gene exchange among the populations of A. hongkongensis. The clades of the phylogenetic tree were mixed together, no significant genetic differentiation among 8 populations and they share the same ancestor from the network analysis, these indicate that they are monophyly and should be protected as one ESU. Combined with the information of relationships of interspecies, genetic distance and distribution investigate, We conclude that A. hongkongensis is an endemic species of Hong Kong. Considering on the status of low genetic diversity in A.hongkongensis, and this species was listed in the IUCN red list as near threatened, as well as listed in the
Resumo:
梗稻广亲和种质02428h中倒一节间伸长的性状由一对隐性基因(h基因)所控制,本实验证明了将h基因导入保持系与雄性不育系中均能得到遗传表达,促进倒一节的伸长。h基因与可育胞质及野败不育胞质作用后分别使穗伸出度达15cm,1.2cm,而相应珍汕97B及珍汕97A穗伸出度仅分别为1.7cm,-9.8cm。即h基因使穗伸出度分别提高8.8倍及1.2倍。因此,利用h基因有可能充分消除雄性不育系的包颈现象。The character of greatly elongated uppermost internode of wide compatible japonica rice 02428h iscontrolled by a recessive gene(b gene). The study shows that h gene could get genetic expression in maintaince andmale-sterile line(MS-line) and make the uppermost internode elonged. H gene interacts with the fertile and wild abortive male sterile cytoplasm make panicie neck exsert to 15cm and 1.2cm, while panicle neck exsertions of parents zhenshan 97B and A were 1.7cm and -9.8cm. So, h gene makes panicle necks exsert 8.8 and 1.2 times repectively. Its is possible to introduce h gene into male-sterile line so as to eliminate panicle endosure.
Resumo:
Within the framework of the improved isospin-dependent quantum molecular dynamics (ImIQMD) model,he fusion dynamics of symmetric reaction systems are investigated systematically. Calculations show that the number of nucleon transfer in the neck region is appreciably dependent on the incident energies, but strongly on he reaction systems. A comparison of the neck dynamics is performed for the symmetric reactions 58Ni+58Niand 64Ni+64Ni at energies in the vicinity of the Coulomb barrier. An increase of the ratios of the neutron to proton in the neck region at initial collision stage is observed and obvious for the latter system, which reduces the fusion barrier of two colliding nuclei. The distribution of the dynamical fusion barriers and the fusion excitation functions are calculated and compared with the available experimental data.