雾化NdFeB合金粉末的组织结构与磁性能

用８ＭＰａ的Ａｒ气雾化制取ＮｄＦｅＢ合金粉末，光学金相观察和Ｘ射线衍射分析表明，粉末主要由Ｎｄ２Ｆｅ１４Ｂ相组成。粉末具有一定的矫顽力，回火处理后矫顽力明显提高。不同粒度的粉末矫顽力存在差异，粉末越细其矫顽力越高。粉末初始磁化曲线与烧结ＮｄＦｅＢ磁体相似。

希土永磁材料Nd—Fe—B氧化过程及抗氧化新体系的研究

Nd-Fe-B永磁体的热稳定性较差,易氧化,氧化使材料的结构受到破坏,永磁性能受到不可恢复的损失。氧化过程是分阶段的,在室温和干燥的空气中是稳定的,150℃左右受到破坏的主要原因是体系中钕的氧化,230℃以上铁开始氧化,温度升高使氧化加快,800℃左右氧化基本结束,最终产物主要是Fe_2O_3、Nd_2O_3和NdBO_3。新研制的Nd-Fe-B-Si四元体系的抗氧化能力有较大的提高,居里温度也提高了许多,是一种大有发展前途的新材料。

高性能全永磁ECR离子源LAPECR2的研制

研制了一台体积和重量都较大、设计性能较高的全永磁电子回旋共振(Electron cyclotron resonance, ECR)离子源LAPECR2(Lanzhou all permanent magnetic ECR ion source No．2)。该离子源将用于中国科学院近代物理研究所320 kV高压平台,为其提供强流高电荷态离子束流。LAPECR2的研制采用全新的全永磁磁体结构设计,通过采用高性能的NdFeB永磁材料、优化的磁结构设计以及精确的计算,实测源体的磁场参数能达到高性能ECR离子源的设计要求。离子源采用较高频率的14．5 GHz微波馈入加热等离子体,波导直接馈入离子源以增强馈入微波的稳定性与效率。此外,还大量采用了一些有利于提高离子源高电荷态离子产额的关键技术,如铝内衬等离子体弧腔、负偏压盘、铝制等离子体电极、三电极引出系统、辅助掺气等。

Preliminary results of the updated LECR2 source-LECR2M

The Latest developed LECR2M (Lanzhou ECR No. 2 Modified) source is the updated one of LECR2 (Lanzhou ECR No. 2) source at IMP. It has been assembled on the low energy ion beam experimental platform to produce MCI beams for atomic physics and material physics experimental research. In our updating program, the structure of injection and extraction components has been modified to make the source structure more simple and effective. The hexapole magnet has also been replaced by a new hexapole magnet with higher radial field and larger inner diameter. With this updating, stronger magnetic field confinement of the ECR plasma is possible and better base vacuum condition is also achieved. LECR2M was designed to be operated at 14.5GHz. During the preliminary test, 1.3emA O6+ beam was extracted with the injected rf power of 1.1kW. The source has been used to deliver intense MCI beams for different experiments. After some discussion of the main features of this newly updated source, some of the typical commissioning test results of LECR2M will be presented.

海洋救助机器人用钕铁硼永磁直流电动机设计

为中科院沈阳自动化研究所机器人中心研制了海洋救助机器人推进器用钕铁硼永磁直流电动机.针对该电动机设计的特殊性,重点论述电动机功率、电压、转速及主要尺寸的确定方法,主磁极、换向器和电刷装置的设计方法,对电动机的结构特点、电磁性能和实验结果也作了介绍.