30 MeV/u~(40)Ar+~(nat)Ag反应中类弹碎片发射的时-空演化

报道了 ３０ＭｅＶ／ ｕ(４０)Ａｒ＋(ｎａｔ)Ａｇ反应中中等质量碎片（ＩＭＦ）发射时间（τ）随发射源空间大小的演化规律，并对类弹碎片的发射时空进行了讨论．结果表明，ＩＭＦ的发射时标与中等质量碎片关联函数以及发射源的核物质密度（ρ）有关，而与发射源的质量数的关系不大．对于能量较高的类弹碎片来说，在较小的核物质密度下提取的发射时间也较小，因此，在正常核物质密度参数下提取出的发射时间值可作为碎片实际发射时间的上限值．中速碎片的发射时间随密度大小的变化非常缓慢，提取出的发射时间值即可作为实际的发射时间。

重离子与~(nat)W相互作用中Hf的生成研究

用放射化学方法研究了6.3、8.5、11.8、14.7、18.4、24.6、40 MeV/nucleon ~(40)Ar + ~(nat)W、10.5 MeV/nucleon ~(84)Kr + ~(nat)W、80 MeV/nucleon ~(16)O + ~(nat)W、135 MeV/nucleon ~(12)C + ~(nat)W反应中的Hf的生成，得到了Hf同位素的激发函数、反冲性质和同位素分布。研究结果指出利用HIRFL能量的重离子和丰中子靶核作用，能以一定的截面生成A > 170区丰中子新核素。重炮弹更有利于丰中子新核素的生成。使用厚靶，可以明显地提高丰中子新核素的产额。过高的入射能量对丰中子新核素的生成无明显贡献，相反却极大地增加了缺中子同位素产额，这对丰中子新核素的分离和鉴别是非常不利的

30MeV/u~(40)Ar+~(nat)Ag反应中中等质量碎片的发射机制及其发射时间测量

中等质量碎片（IMF）的发射是中能重离子碰撞的一大特点，且随着轰击能量的升高其产额迅速增加。通过测量30MeV/u 40Ar+natAg反应中出射的中等质量碎片，研究了高激发热核的发射机制、发射时标和时空演化规律。 对反应中发射碎片能谱的运动源拟合表明，前角区（11°—22°）中等质量碎片（IMF）来自于三种成分：类靶源、类弹源和中速源成分，其中类弹和中速成分占主导，关联测量的IMF能谱拟合得到，一个来自于类弹源而另一个来自于中速源成分的事件占有相当大的比例。 利用小相对角度内的两碎片关联测量，研究高激发核衰变中中等质量碎片的发射时标和寿命。IMF发射时间随能量的变化很大，从低能碎片的250 fm/c到高能粒子的100 fm/c，表明在此能量下，反应中出射的IMF主要来自于相继两体衰变。通过与其它实验的比较可知，随着束流能量的升高，IMF发射时间由相继两体衰变向多重碎裂过渡。 IMF时空演化研究表明，发射空间的大小对IMF关联函数的影响主要来自于发射源的核物质密度而几乎不依赖于发射源的质量数。

中能区~(40)Ar + ~(197)Au/~(159)Tb/~(nat)Ag反应中高激发热核性质研究

通过对中能区Ar+Au/Tb/Ag反应中高激发核的发射时标、发射次序、发射机制、核温度、集体运动等衰变特性的研究，提取了轻粒子和中等质量碎片（IMF）的发射时间，IMF发射时间随束流能的升高而变短，发射机制逐渐由相继衰变过渡至多重碎裂。研究了轻粒子和碎片间的发射次序，对高能粒子和碎片，轻粒子先于碎片发射，而低能时，则为碎片先于轻粒子发射。IMF发射成分与角度和碰撞参数有关，前角区来自于弹核碎裂，后角区来自于类靶热核的蒸发。在平面和出平面研究表明，中速粒子和碎片为在平面发射占主导，即存在类转动效应；对轻粒子，转动效应随粒子质量增加而增加；对中速产物均观测到该效应随碰撞参数饿增大而增大。采用几种不同的方法提取了热核的核温度，研究了不同方法之间的区别。

层片TiAl合金的微结构对力学行为的影响

本论文针对可能应用于叶片零部件的铸造全层片TiAl基合金进行了多方面的实验研究。目的着重于观测该材料的力学性能对微结构因素的敏感性及其失效行为，并以裂纹萌生为线索探讨其相关的物理和力学内禀机制的表征。研究工作涉及到多种跨越毫米尺度的宏－细－微观力学测试方法和技术，其中，新型试样的应力分析和可行性说明针对于脆怀板材试样并具有良好自对中能力的夹具设计是成功的。单调拉伸实验和拉一拉疲劳实验得到了所研究试样的基本力学性能和影响疲劳性能的微结构敏感因素，如晶粒取向、晶粒大小等。实验研究重点说明了层片取几因素对疲劳抗力的影响一与拉伸轴方向平行的晶粒具有最好的裂纹萌生抗力。扫描电镜和透射电镜下的原位拉伸实验得到了沿层片裂纹萌生的等征，这些等征包括：层片裂纹与拉伸轴夹角呈40°／60°／90°的方向倾向性、裂纹沿γ相真孪晶层片界面萌生的位置倾向性等。纳米压痕实验和原子力显微实验证了层片的弹性模量差异，为宏一细一微观分析提供了依据。分析和讨论工作针对于沿层片萌裂纹的方向的选择性和位置的倾向性等实验现象，以宏观界面力学方法和晶体学理论，侧重表征了与层间变形特性相关的力学和物理机制：（１）以模理量失配理论为基础提出了等效失配概念，得到瞪层片TiAl合金的等效失配度为0.16；（2）以界面能量释放率断裂准则为基础，提出了模式因子（TiAl,0.24）方法来评价拉、剪力的耦合作用；（3）根据以汤普森四面体所构筑的γ层间组合模型，并采用γ层片的惯习面间异类原子对数（NAT值）、穿层几何协调因子和穿层几何协调加和因子等方法分别表征其原子结构尺度下的界面结全强度和层间变形的位错协调性。分析和讨论重阐明了全层片TiAl有序合金的层间抗剪切能力较弱和γ层间真孪晶界面易于裂纹萌生等结果。

Identification and characterization of novel reptile cathelicidins from elapid snakes

Three cDNA sequences coding for elapid cathelicidins were cloned from constructed venom gland cDNA libraries of Naja atra, Bungarus fasciatus and Ophiophagus hannah. The open reading frames of the cloned elapid cathelicidins were all composed of 576 bp an

Mitochondrial cytochrome b gene sequence diversity in the Korean hare, Lepus coreanus Thomas (Mammalia, Lagomorpha)

Partial sequences of the mitochondrial cytochrome b gene of the Korean hare (Lepus coreanus) were analyzed to determine the degree of genetic diversity. Nine haPlotyes were observed, and the maximum Tamura-Nei nucleotide distance among them was 2.8%, indicating that genetic diversity of L. coreanus is moderate. In order to clarify the Korean hare's taxonomic status and relationship with the Manchurian hare (L. mandshuricus) and the Chinese hare (L. sinensis), these nine haplotypes of the Korean hare were compared with 13 haplotypes from five other species of eastern Asian Lepus including L. mandshwicus and L. sinensis. The Korean hare was distinct in its cytochrome b gene, and it is confirmed that L. coreanus is a valid species, as noted by Jones and Johnson (1965, Univ. Kansas Publ. (Mus. Nat. Hist.) 16:357). Further analyses of mtDNA cytochrome b gene with additional specimens of L. coreanus from North Korea and other species of Lepus from eastern Asia are needed to clarify the taxonomic status of the divergent mtDNA clades of L. mandshuricus and L. sinensis.

Pockels effect in GaN/Al-x,Gal(1-x)N superlattice with different quantum structures - art. no. 69841G

The linear electro-optic (Pockels) effect of wurtzite gallium nitride (GaN) films and six-period GaN/AlxGa1-xN superlattices with different quantum structures were demonstrated by a polarization-maintaining fiber-optical Mach-Zehnder interferometer system with an incident light wavelength of 1.55 mu m. The samples were prepared on (0001) sapphire substrate by low-temperature metalorganic chemical vapor deposition (MOCVD). The measured coefficients of the GaN/AlxGa1-xN superlattices are much larger than those of bulk material. Taking advantage of the strong field localization due to resonances, GaN/AlxGa1-xN SL can be proposed to engineer the nonlinear responses.

Study of Si/SiO2 hybrid antireflective coatings on SLD prepared by DSEBET - art. no. 69842P

We introduce a double source electron beam evaporation (DSEBET) technique in this paper. The refractive index coatings were fabricated on K9 glass substrate by adjusting the evaporation rates of two independent sources. The coatings, which were described by atomic force microscopy (AFM), show good compactness and homogeneity. The antireflective (AR) coatings were fabricated on Superluminescent Diodes (SLD) by DSEBET. The hybrid AR coatings on the facets of SLD were prepared in evaporation rates of 0.22nm/s and 0.75nm/s for silicon and silicon dioxide, respectively. The results of AFM and spectral performance of coated SLD show that DSEBET has a promising future in preparing the coatings on optoelectronic devices.

Single dipole mode photonic crystal laser on InGaAsP/InP QW waveguide slab - art. no. 698436

Single point defect microcavity possesses only the degenerate dipole modes under certain photonic crystal structure parameters. By deforming lattice structure, the degeneracy of the dipole modes has been broken. Theoretical simulation shows the large splitting of 65nm between the splitted x-mode and y-mode, approximate to the luminescent gain spectrum, which benefits for the single mode lasing. Experimentally the single dipole mode lasing, y-mode, is achieved in the deformed microcavity.

Mode analysis of photonic crystal polarization beam splitter and its application in integrated circuits design - art. no. 698437

In this work, the guided modes of a photonic crystal polarization beam splitter (PC-PBS) are studied. We demonstrate that the transmission of a low-loss photonic crystal 120 degrees waveguide bend integrated with the PBS will be influenced if the PBS is multi-moded. We propose a single-moded PC-PBS structure by introducing deformed structures, and it shows twice the enhancement of the transmission. This device with remarkable improvement of performance is promising in the use of photonic crystal integrated circuits design.