The effects of CpG-C oligodeoxynucleotides on innate immune responses in Eriocheir sinensis (H. Milne-Edwards, 1853)

CpG oligodeoxynucleotides (ODNs) can stimulate the immune system, and therefore are widely used as a therapeutic vaccination and immune adjuvant in human. In the present study, CpG-C, a combination of A- and B-class ODN, was injected into Chinese mitten crab Eriocheir sinensis at three doses (0.1, 1 and 10 mu g crab-1), and the reactive oxygen species (ROS) levels, activities of total intracellular phenoloxidase (PO) and lysozyme-like activities, the mRNA transcripts of EsproPO, EsCrustin and EsALF were assayed to evaluate its modulating effects on the immune system of crab. The ROS levels in all treated and control groups were significantly increased from 6 to 24 h, except that ROS in 0.1 mu g CpG-C-treated crabs was comparable to that of the blank at 6 h. The PO activity was significantly enhanced and EsproPO transcripts were down-regulated (P < 0.01) at 6 h after the injection of 0.1 mu g CpG-C, with no significant changes in the other dosage treatments. The lysozyme-like activities and EsCrustin transcripts in the CpG-C-treatment groups were significantly higher than those of controls. The mRNA expression of EsALF remained almost constant in all the groups during the treatment. These results collectively suggested that CpG-C could activate the immune responses of E. sinensis, and might be used as a novel immunostimulant for disease control in crabs.

The effects of CpG-C oligodeoxynucleotides on innate immune responses in Eriocheir sinensis (H. Milne-Edwards, 1853)

CpG oligodeoxynucleotides (ODNs) can stimulate the immune system, and therefore are widely used as a therapeutic vaccination and immune adjuvant in human. In the present study, CpG-C, a combination of A- and B-class ODN, was injected into Chinese mitten crab Eriocheir sinensis at three doses (0.1, 1 and 10 mu g crab-1), and the reactive oxygen species (ROS) levels, activities of total intracellular phenoloxidase (PO) and lysozyme-like activities, the mRNA transcripts of EsproPO, EsCrustin and EsALF were assayed to evaluate its modulating effects on the immune system of crab. The ROS levels in all treated and control groups were significantly increased from 6 to 24 h, except that ROS in 0.1 mu g CpG-C-treated crabs was comparable to that of the blank at 6 h. The PO activity was significantly enhanced and EsproPO transcripts were down-regulated (P < 0.01) at 6 h after the injection of 0.1 mu g CpG-C, with no significant changes in the other dosage treatments. The lysozyme-like activities and EsCrustin transcripts in the CpG-C-treatment groups were significantly higher than those of controls. The mRNA expression of EsALF remained almost constant in all the groups during the treatment. These results collectively suggested that CpG-C could activate the immune responses of E. sinensis, and might be used as a novel immunostimulant for disease control in crabs.

稻属C���色体组物种的群体遗传学和物种形成研究

植物近缘物种系统发育和物种形成过程一直以来都是植物进化生物学研究中最基本的问题之一，是人们理解自然界物种多样性产生和变化的前提。近缘物种间通常形态相似，遗传和分子水平的分化很小且常受诸如渐渗杂交、谱系分选、种内重组等微观进化事件的影响，导致植物近缘物种间系统发育和物种形成过程研究极为困难。在过去十多年中，生物技术的革新和理论方法的发展极大地推动了进化生物学研究，促进了人们对一些重要模式生物与其近缘种间的系统发育关系和物种分化过程的认识，如人、果蝇、线虫、拟南芥和玉米等。然而，迄今在植物中，许多重要类群及其近缘种的系统发育和物种形成过程研究仍不多见，包括在具有特殊重要性的栽培作物中，如稻属（Oryza L.）。由于属内包含有重要粮食作物水稻，稻属向来都是禾本科内备受关注的一个类群。本研究中，我们通过多基因序列的方法，探讨了稻属C���色体组三个近缘二倍体物种的系统发育和物种形成过程，主要研究结果如下。 为选择适宜的实验策略和保证序列数据的真实性，我们利用不同聚合酶扩增自交的栽培稻Oryza sativa ssp. japonica和异交的O. longistaminata不同类型的基因片段，采用克隆测序的方法，评估聚合酶链式扩增反应（PCR）中产生的非真实变异的状况。我们使用exTaq、exTaq和Pfu混和酶和PfuUltraTM酶三种不同聚合酶扩增了Adh1、GPA1和Waxy三个基因片段。在检测到的非真实变异中，PCR 错误的类型主要为单碱基变异和不同等位基因间重组，其中以单碱基变异为主，且突变类型以转换占绝大多数。比较不同酶扩增错误的结果表明，高保真PfuUltraTM酶对PCR反应错误有显著的改善，在扩增产物的单克隆中几乎检测不到PCR噪音，错误率仅为0.0001%，而exTaq和混和酶的错误率分别为0.096%和0.073%。从不同物种比较结果来看，exTaq酶和Pfu酶混用时在自交的O. sativa ssp. japonica内对PCR错误也表现明显的改善，但在异交的O. longistaminata中改善效应不太明显。在三个不同基因位点上，PCR扩增错误出现频率随扩增区域增长而变大。在PfuUltraTM酶的扩增产物中发现重组最少，exTaq和混和酶重组较多，且混和酶对重组改善效果不明显。基于不同聚合酶扩增错误对比研究结果，我们认为，由于能保证序列变异的真实性且不遗漏等位基因，核基因的克隆测序较宜于分离杂合个体中不同的等位基因。 基于随机挑取4个叶绿体和10个核基因位点，利用12份Oryza officinalis、8份O. eichingeri和4份O. rhizomatis材料，对稻属C���色体组三个近缘二倍体物种的系统发育关系作了深入分析。利用不同的系统发育分析方法对单基因位点序列和合并序列数据作了分析，结果表明，稻属C���色体组三个近缘种间呈多歧分支。因此，三个二倍体C���色体组物种可能经快速辐射分化形成。在不同核基因和叶绿体基因的系统发育树中各分支枝长均很短，也表明C���色体组的三个物种可能在较短时期内分化出。不同基因间拓扑结构不一致主要受谱系随机分选的影响。此外，C���色体组不同物种间的种间渐渗和不同等位基因重组对系统发育树的冲突也有影响。值得注意的是，C���色体组三个物种的辐射分化不排除由于相邻两次物种形成事件间隔时间太近、目前数据量不够而无法分辨的可能。在本研究中，我们发现，对于系统发育重建困难的类群，利用等位基因构建物种谱系树有助于挖掘不同基因间结果不一致的因素。 基于10个随机选取的核基因序列数据，利用物种水平的取样方式和群体遗传学分析方法，我们研究了稻属C���色体组三个近缘物种O. officinalis、O. eichingeri和O. rhizomatis的核苷酸多态性，并根据多态性水平和式样，推测了三个近缘种分化的历史。结果表明，在C���色体组的三个近缘种中，仅分布于斯里兰卡的O. rhizomatis的核苷酸多态性水平相对最低（θsil = 0.0038），而间断分布于非洲和斯里兰卡的O. eichingeri最高（θsil = 0.0057）。与被子植物其他类群相比，稻属C���色体组三个物种的核苷酸多态性水平显得较低，O. eichingeri的核苷酸多态性仅约为玉米及其近缘野生种的23-46%和拟南芥的35%。C���色体组内三个野生种相对较低的核苷酸多态性水平可能起因于其较小的祖先有效群体。物种形成模型分析表明，O. officinalis和其近缘种从最近共同祖先分化开后可能经历了居群缩减的历史，且自最近共同祖先分开后，三个物种彼此间并无显著的基因交流。基于分子钟粗略估算了C���色体三个物种分化时间，结果表明，三个物种彼此在很短的时期内分开，约0.63-0.68 Myr。同时，O. eichingeri在非洲和斯里兰卡两个地理宗的分异时间约为0.37 Myr，且推测斯里兰卡的O. eichingeri主要由西非经长距离扩散传播到斯里兰卡。

Origin and Pathway of Equatorial 13 degrees C Water in the Pacific Identified by a Simulated Passive Tracer and Its Adjoint

The origin and pathway of the thermostad water in the eastern equatorial Pacific Ocean, often referred to as the equatorial 13 degrees C Water, are investigated using a simulated passive tracer and its adjoint, based on circulation estimates of a global general circulation model. Results demonstrate that the source region of the 13 degrees C Water lies well outside the tropics. In the South Pacific, some 13 degrees C Water is formed northeast of New Zealand, confirming an earlier hypothesis on the water's origin. The South Pacific origin of the 13 degrees C Water is also related to the formation of the Eastern Subtropical Mode Water (ESTMW) and the Sub-Antarctic Mode Water (SAMW). The portion of the ESTMW and SAMW that eventually enters the density range of the 13 degrees C Water (25.8 < sigma(theta) < 26.6 kg m(-3)) does so largely by mixing. Water formed in the subtropics enters the equatorial region predominantly through the western boundary, while its interior transport is relatively small. The fresher North Pacific ESTMW and Central Mode Water (CMW) are also important sources of the 13 degrees C Water. The ratio of the southern versus the northern origins of the water mass is about 2 to 1 and tends to increase with time elapsed from its origin. Of the total volume of initially tracer-tagged water in the eastern equatorial Pacific, approximately 47.5% originates from depths above sigma(theta) = 25.8 kg m(-3) and 34.6% from depths below sigma(theta) = 26.6 kg m(-3), indicative of a dramatic impact of mixing on the route of subtropical water to becoming the 13 degrees C Water. Still only a small portion of the water formed in the subtropics reaches the equatorial region, because most of the water is trapped and recirculates in the subtropical gyre.

Nonequilibrium microstructures and their evolution in a Fe-Cr-W-Ni-C laser clad coating

The laser-solidified microstructural and compositional characterization and phase evolution during tempering at 963 K were investigated using an analytical transmission electron microscope with energy dispersive X-ray analysis. The cladded alloy, a powder mixture of Fe, Cr, W, Ni, and C with a weight ratio of 10:5:1:1:1, was processed with a 3 kW continuous wave CO2 laser. The processing parameters were 16 mm/s beam scanning speed, 3 mm beam diameter. 2 kW laser power, and 0.3 g/s feed rate. The coating was metallurgically bonded to the substrate, with a maximum thickness of 730 mu m, a microhardness of about 860 Hv and a volumetric dilution ratio of about 6%. Microanalyses revealed that the cladded coating possessed the hypoeutectic microstructure comprising the primary dendritic gamma-austenite and interdendritic eutectic consisted of gamma-austenite and M7C3 carbide. The gamma-austenite was a non-equilibrium phase with extended solid solution of alloying elements and a great deal of defect structures, i.e. a high density of dislocations, twins, and stacking faults existed in gamma phase. During high temperature aging, in situ carbide transformation occurred of M7C3 to M23C6 and M6C. The precipitation of M23C6, MC and M2C carbides from austenite was also observed.

铁基抗高温磨损激光熔覆涂层强韧设计和研究II:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

本文以对热工模具进行失效分析的基础上，利用激光熔覆技术，在５ＣｒＭｎＭｏ基础上设计并制备强韧兼备的抗高温磨损涂层。

Application of Optical Protein-chip in Detecting Phage M13KO7

Abstract: Avidin layer was bound on the substrate surface of Silicon wafer modified with aldehyde. The interaction between avidin and biotin was adopted for the immobilization of mouse monoclonal biotin-anti-M13 (antibody GP3)-labeled biotin. The surface was incubated in a solution containing phage M13KO7, which was trapped by the antibody GP3 with the interaction between phage M13KO7 and antibody GP3, resulting in a variation of layer thickness that was detected by imaging ellipsometry. The results showed a saturated layer of antibody GP3 with a thickness about 6.9 nm on the surface of the silicon wafer. The specific interaction between phage M13KO7 and antibody GP3 resulted in a variation of layer thickness. The layer of phage M13KO7 bound with antibody GP3 was 17.5 nm in the concentration of 1.1×1010 pfu/mL. Each variation of the layer thickness corresponded to a concentration of phage M13KO7 in the range of 0.1×1010–2.5×1010 pfu/mL, with the sensitivity of 109 pfu/mL. Compared with other methods, the optical protein-chip, requiring only short measurement time, label free, is a quantitative test, and can be visualized. This study could be significant on the interactions between the antibody and the virus, showing potential in the early diagnosis of virosis.

裂纹顶端位错的运动和小范围屈服的K_(Ⅱc)

本文从裂纹顶端位错运动的简化模型估计形成塑性区所消耗的功;从而计算临界裂纹扩展力。由于Ⅰ型加载和Ⅱ型加载的应力状态有所不同,裂纹顶端塑性功耗也会不一样。基于上述思想,考虑了小范围屈服的K_(Ⅰc)和K_(Ⅱc)的关系,得出K(Ⅱc)>K(Ⅰc)的结论,符合实验结果;并就K(Ⅱc)/K(Ⅰc)的比值与材料性能和温度的关系作了讨论。

铁基抗高温磨损激光熔覆涂层强韧设计和研究 Ⅱ:Fe-Cr-C-W-Ni激光熔覆层的微观组织及性能

利用ＯＭ、ＳＥＭ、ＴＥＭ研究了Ｆｅ－Ｃｒ－Ｃ－Ｗ－Ｎｉ激光熔覆涂层熔覆态及其高温时效态的微观组织结构。结果表明激光熔覆层组织细小，具有强韧两相组成（奥氏体和Ｍ_７Ｃ_３碳化物）的微观结构特征，高温时效处理组织中有Ｍ_（２３）Ｃ_６、Ｍ_６Ｃ、Ｍ_２Ｃ等新碳化物形成。显微硬度和冲击磨损实验证实了激光熔覆态和峰值时效态熔覆层均具有良好的力学性能。