Partition Energy Absorption of Axially Crushed Aluminum Foam-Filled Hat Sections

The "interaction effect" between aluminum foam and metal column that takes place when foam-filled hat sections (top-hats and double-hats) are axially crushed was investigated in this paper. Based on experimental examination, numerical simulation and analytical models, a systemic approach was developed to partition the energy absorption quantitatively into the foam filler component and the hat section component, and the relative contribution of each component to the overall interaction effect was therefore evaluated. Careful observation of the collapse profile found that the crushed foam filler could be further divided into two main energy-dissipation regions: densified region and extremely densified region. The volume reduction and volumetric strain of each region were empirically estimated. An analytical model pertinent to the collapse profile was thereafter proposed to find the more precise relationship between the volume reduction and volumetric strain of the foam filler. Combined the superfolding element model for hat sections with the current model according to the coupled method, each component energy absorption was subsequently derived, and the influence of some controlling factors was discussed. According to the finite element analysis and the theoretical modeling, when filled with foam, energy absorption was found to be increased both in the hat section and the foam filler, whereas the latter contributes predominantly to the interaction effect. The formation of the extremely densified region in the foam filler accounts for this effect.

An Effective Method of Determining the Residual Stress Gradients in a Micro-Cantilever

A method of determining the micro-cantilever residual stress gradients by studying its deflection and curvature is presented. The stress gradients contribute to both axial load and bending moment, which, in prebuckling regime, cause the structural stiffness change and curving up/down, respectively. As the axial load corresponds to the even polynomial terms of stress gradients and bending moment corresponds to the odd polynomial terms, the deflection itself is not enough to determine the axial load and bending moment. Curvature together with the deflection can uniquely determine these two parameters. Both linear analysis and nonlinear analysis of micro-cantilever deflection under axial load and bending moment are presented. Because of the stiffening effect due to the nonlinearity of (large) deformation, the difference between linear and nonlinear analyses enlarges as the micro-cantilever deflection increases. The model developed in this paper determines the resultant axial load and bending moment due to the stress gradients. Under proper assumptions, the stress gradients profile is obtained through the resultant axial load and bending moment.

BONDING OF ALUMINA AND METAL USING BULK METALLIC GLASS FORMING ALLOY

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.

Bonding Of Alumina And Metal Using Bulk Metallic Glass Forming Alloy

Metal-alumina joints have found various practical applications in electronic devices and high technology industry. However, making of sound metal ceramic brazed couple is still a challenge in terms of its direct application in the industry. In this work we successfully braze copper with Al2O3 ceramic using Zr52.5Cu17.9Ni14.6Al10Ti5 bulk metallic glass forming alloy as filler alloy. The shear strength of the joints can reach 140 MPa, and the microstructrural analysis confirms a reliable chemical boning of the interface. The results show that the bulk metallic glass forming alloys with high concentration of active elements are prospective for using as filler alloy in metal-ceramic bonding.

Effects of melting temperature on the broadband infrared luminescence of bi-doped and Bi/Dy co-doped chalcohalide glasses

Bismuth (Bi)-doped and Bi/Dy co-doped chalcohalide glasses are investigated as promising materials for amplifiers in optical communication. The samples synthesized at lower melting temperatures (MTs) are characterized by more intensified infrared emissions. With respect to the redox process of a liquid mixture at different MTs, we attribute an emission at 1230 nm to low-valent Bi ions. The lower MT favors the formation of LVB ions, i.e. Bi+ or Bi2+, while the higher MT promotes the production of higher-valent Bi ions Bi3+. An enhanced broadband infrared luminescence with the full-width at half-maximum over 200 nm is achieved from the present Bi/Dy co-doped chalcohalide glasses.

Effects of thermal treatment on broadband near-infrared emission from Bi-doped chalcohalide glasses

GeGaSKBr glass with Bi ions as emission centers were fabricated. An intense emission centered at around 1230 nm with the width of more than 175 nm was observed by 808 nm photo-excitation of the glass. Lower quenching rate and thermal treatment promote micro-crystallization process, thus strengthening the emission. Crown Copyright (c) 2008 Published by Elsevier Ltd. All rights reserved.

云南4个少数民族的随机扩增多态DNA分析

1990年,Williams和Welsh领导的2个小组几乎同时独立地发展起来一项新技术,即随机扩增多态DNA(Random amplified polymorphic DNA,RAPD).该技术通过PCR进行DNA扩增,所用引物是G+C含量为50%—70%的单个随机短引物,这些引物在一定的退火条件下能与基因组DNA中的互补顺序配对,启动DNA的合成.RAPD具有以下特点:(1)无需预先知道受试有机体基因组DNA的序列,因而能应用于所用的生物体;(2)绝大多数

Mitochondrial DNA hypervariable region-1 sequence variation and phylogeny of the concolor gibbons, Nomascus

The still little known concolor gibbons are represented by 14 taxa (five species, nine subspecies) distributed parapatrically in China, Myanmar, Vietnam, Laos and Cambodia. To set the stage for a phylogeographic study of the genus we examined DNA sequence

The evolution of intermediate castration virulence and ant coexistence in a spatially structured environment

Theory suggests that spatial structuring should select for intermediate levels of virulence in parasites, but empirical tests are rare and have never been conducted with castration (sterilizing) parasites. To test this theory in a natural landscape, we co

Morphine and propranolol co-administration impair consolidation of Y-maze spatial recognition memory

In the present study, the interaction between morphine and the beta-adrenergic receptor antagonist, propranolol (PROP), in memory consolidation was investigated in a two-trial recognition Y-maze task. Four sets of Y-maze experiments were carried out in mi

Bunga rus bunga roides , A Record New to China ( Xizang AR) with a Note on Trimeresurus tibeta nus( Plate Ⅵ, lower)

1998 年在西藏墨脱县海拔1000 m 左右地方采到成年雌性环蛇1 号, 系我国新纪录。该蛇全长/ 尾长(mm) 1095/ 112 (尾尖断) 。通身背面黑褐色, 后3/ 4 有由背鳞白色点斑缀成的窄横纹约40 个; 腹面浅黑 色, 每隔3 或4 枚腹鳞有不规则的黄白色横斑。尾背有少数不完整的白色纹, 但尾腹面有7 条很明显的横斑。头 部斑纹与M. Smith (1943 : 410) 描述一致, 可能由于蛇龄较老而不清晰。背鳞通身15 行, 脊鳞略扩大; 腹鳞 233 , 尾下鳞35 (略低于文献记载的44～51 , 可能与尾尖断有关) , 除前端第三、四两枚成单外, 其余均成对。 没有颊鳞; 眶前鳞1 , 眶后鳞2 ; 颞鳞1 + 2 ; 上唇鳞7 (22223 式) ; 下唇鳞7 , 第一对在颏鳞后彼此相接, 前4 对 接前颔片; 前颔片大于后颔片, 后者后半介一小鳞。检查一侧, 除前沟牙及其预备牙外, 没有发现其他上颌齿。