Conformal irradiation to moving targets in heavy ion radiotherapy with raster-scanning beam delivery system: (II) feasibility experiments

Within the framework of the pilot heavy-ion therapy facility at GSI equipped with an active beam delivery system of advanced raster scanning technique, a feasibility study on actively conformal heavy-ion irradiation to moving tumors has been experimentally conducted. Laterally, real-time corrections to the beam scanning parameters by the raster scanner, leading to an active beam tracing, compensate for the lateral motion of a target volume. Longitudinally, a mechanically driven wedge energy degrader (called depth scanner) is applied to adjust the beam energy so as to locate the high-dose Bragg peak of heavy ion beam to the slice under treatment for the moving target volume. It has been experimentally shown that compensations for lateral target motion by the raster scanner and longitudinal target shift by the depth scanner are feasible.

Response of cyanobacterial carbon concentrating system to light intensity: a simulated analysis

Cyanobacteria possess a delicate system known as the carbon concentrating mechanism (CCM), which can efficiently elevate the intracellular inorganic carbon (Ci) concentration via active transportation. The system requires energy supplied by photosystems; therefore, the activity of the Ci transporter is closely related to light intensity. However, the relationship between CCM and light intensity has rarely been evaluated. Here, we present an improved quantitative model of CCM in which light is incorporated, and developed a CCM model that modified after Fridlyand et al. in 1996. Some equations used in this model were inducted to describe the relationship between transport capacity and light intensity, by which the response of the CCM to light change is simulated. Our results indicate that the efficiency of the carbon concentrating system is sensitive to light intensity. When the external Ci concentration was low, CO2 uptake dominated the total Ci uptake with increasing light intensity, while under high external Ci concentrations HCO3- uptake primarily contributed to the total Ci uptake. Variations in the ratio of energy allocated between the transport systems could markedly affect the operation of CCM. Indeed, our simulations suggest that various combinations of Ci fluxes can provide a possible approach to detect the way by which the cell distributes energy produced by the photosystems to the two active Ci transport processes. The proportion of the energy consumed on CCM to the total energy expenditure for the fixation of one CO2 molecule was determined at 18%-40%.

90°全息记录衍射效率分析与提高

对光折变全息记录特别是双中心全息记录中90°记录结构下较低的衍射效率进行了研究, 采用局域衍射理论对90°记录结构的衍射进行了分析,表明在同样的折射率变化和2 mm的光束宽度的情况下, 只有当折射率光栅振幅大于10-4时, 90°记录结构衍射效率才能够与小角度透射记录结构的衍射效率大致相当。针对环境干扰导致的干涉条纹振动影响光栅记录, 提出了有效调制度概念, 根据分析90°记录结构的干涉条纹间距很小, 容易受外界环境干扰而导致低的折射率变化率, 因此应采用主动条纹锁定系统。此外在双中心全息记录中, 微观光

基于ISO/IEC 9126标准的软件质量评价系统

中国计算机学会

几种中药材的化学成分及其定性定量检测方法研究

本论文由四部分组成。第一部分报道了佛手参提取物的化学成分研究，建立了活性成分含量测定的高效液相测定和指纹图谱研究，采用液质联用技术鉴定了主要色谱峰；第二部分报道了丹参及其复方制剂的特征图谱研究；第三部分探讨了两面针生物碱的电喷雾质谱裂解规律，并采用液质联用技术分离鉴定了提取物中的多种生物碱。第四部分概述了液质联用在药物代谢研究中的运用。 第一部分包括第一、第二和第三章。第一章针对佛手参（Gymnadeniaconopsea）块茎的甲醇提取物，采用大孔树脂和反相硅胶柱层析等各种分离方法，共分离鉴定出4 个化合物，通过波谱分析将它们的结构确定为dactylorhin B (1)、loroglossin (2)、dactylorhin A (3)和militarine (4)。这4 个化合物均是首次从佛手参中分离得到的琥珀酸葡萄糖苷类成分。第二章采用高效液相色谱法对西藏、四川、河北、青海和尼泊尔等不同地区产的十个佛手参样品进行腺嘌呤核苷和对羟基苯甲醇的定量分析，结果表明这2 个成份可视为佛手参的特征成分，但也注意到产地不同该2 个特征成分的含量也有所不同。第三章采用标准中药指纹图谱相似度计算软件，以10 个佛手参样品HPLC 图谱的平均值为相似性评价对照模板，对10 个样品进行了相似度评价，并经液质联用分析指认了7 个共有峰，分别为腺嘌呤核苷(1)、对羟基苯甲醇(2)、对羟基苯甲醛(3) 、dactylorhin B(4) 、loroglossin(5)、dactylorhin A(6)和militarine(7)。 第二部分包括第四、第五、第六和第七章。第四章运用电喷雾质谱检测了对照药材和五个不同产地的丹参药材中脂溶性和水溶性成分，系统地探讨了多种成分的电喷雾质谱规律，并以对照药材为标准建立了特征指纹图谱。五个产地的药II材通过与对照药材相对比，采用聚类分析的方法，得到了定性的鉴别与判断。并采用液质联用技术对丹参药材提取液中的化学成份进行分析，推测了九个特征峰，并对六样品的液相色谱图进行了聚类分析。第五章探讨了三七皂苷的电喷雾质谱电离和裂解规律，并采用电喷雾质谱法对三七标准药材，血通片中的皂苷成分进行了分析。第六章运用电喷雾质谱研究复方丹参片提取液的特征图谱，并和单味药材丹参和三七的特征图谱进行了对比研究。并运用HPLC-ESI MSn 分析鉴定了复方丹参片提取液中的化学成分，推测了12 个色谱峰。第七章总结了电喷雾质谱和液质联用技术在丹参药材，三七药材及复方丹参制剂中的运用的优势和局限性。 第三部分（第八章）研究了两面针生物碱中二氢白屈菜红碱(1)、二氢两面针碱(2)、8-酮基二氢白屈菜红碱(3)、8-丙酮基二氢两面针碱(4)、两面针碱(5)、和1,3-二(8-二氢两面针碱)丙酮(6)等六个苯并菲啶型生物碱的电喷雾质谱裂解规律，其中二氢两面针碱和二氢白屈菜红碱，8-丙酮基二氢两面针碱和8-酮基二氢白屈菜红碱是两对二个甲氧基分别在C-9 和C-10，C-10 和C-11 的同分异构体。实验结果表明，在相同的碰撞能下，这类位置异构体的ESI MS2 质谱二级碎片离子的相对峰度存在很大差异，这可以用于区分该类同分异构体，采用液-质联用可以对两面针的总生物碱提取物中的这些同分异构体加于区分。同时在本实验采用的液相色谱条件下，多种生物碱得到较好的分离，通过和对照品的保留时间，紫外吸收光谱及电喷雾质谱图对照，鉴定了11 个主要色谱峰。 第四部分（第九章）对液质联用技术在药物代谢中的运用进行了综述。 This dissertation consisted of four sections. The first two sections elaborated thephytochemical investigation of the rhizomes Gymnadenia conopsea R. Br., methoddevelopment for rapid identifying and qutifying the chemical condtituent of thistibetant medicine, and the chemical fingerprint analysis of rhizomes of G. conopsea,Salviae miltiorrhiza and P. notoginseng. The third section studied the fragmentationmechanism of six alkaloids from Zanthoxylum nitidium and method development forrapid identifying varieties of alkaloids from the extract of this herbal medicine. Thefourth section reviewed HPLC- MS method in drug metabolism studies. The first section consisted of chapters 1, 2, 3. Chapter 1 elaborated the phytochemicalinvestigation of Gymnadenia conopsea R. Br. Four succinate derivative esters wereisolated from the methanol extract of the rhizomes of G. conopsea through repeatedcolumn chromatography on normal and reversed phase silica gel, their structures weredetermined by ESI-MS, 1D and 2D NMR evidence. They were firstly discoveredfrom this species. In chapter 2, a high-performance liquid chromatography.diodearray detection (HPLC-DAD) method has been firstly developed for quantitation oftwo characteristic constituents, adenosine and 4-hydroxybenzyl alcohol, from theextract of rhizomes of G. conopsea. All 10 samples of G. conopsea contained differentamount of adenosine and 4-hydroxybenzyl alcohol. Adenosine and the4-hydroxybenzyl alcohol can be applied in identification and quality control for theroots of G. conopsea. In chapter 3, a high-performance liquid chromatography.diodearray detection.tandem mass spectrometry (HPLC-DAD-MSn) method has been firstly developed for chemical fingerprint analysis of rhizomes of G. conopsea andrapid identification of major compounds in the fingerprints. Comparing the UV andMS spectra with those of authentic compounds, seven main peaks in the fingerprintswere identified as adenosine, 4-hydroxybenzyl alcohol, 4-hydroxybenzyl aldehyde,dactylorhin B, loroglossin, dactylorhin A and militarine. The Computer AidedSimilarity Evaluation System for Chromatographic Fingerprint of TraditionalChinese Medicine (CASES) was employed to evaluate the similarities of 10 samplesof the rhizomes of G. conopsea collected from Sichuan, Qinghai and Hebei provincesand Tibet autonomous region of China, and Nepal. These samples from differentsources had similar chemical fingerprints to each other. The second section consisted of chapters 4, 5, 6 and 7. In chapter 4，both thecharacteristic spectra of liposoluble tanshinones and aqueous-soluble salvianolic acidswere established by the electrospray ionization mass spectrometry (ESI MS)technique and the differences between standard and crude rhizomes of Salviaemiltiorrhiza Bge. from 5 sources were analyzed. The law of electrospray ion trap mass(ESI ITMS) of typical tanshinones and salvianolic acids is studied.The analysis of the chemical constituent of rhizomes of Salviae miltiorrhiza Bge. byliquid chromatography coupled with mass spectrum (LC/MS) technique wasestablished，and the distances among standard herb and crude herb from 5 sourceswere calculated by clustering analysis. According the DAD spectra and MS2 data，9tanshinones could be speculated. In chapter 5, the character spectra of total saponinsin P. notoginseng extracts were established by ESI ITMS and selective ion monitoring(SIM) technology. The law of notoginsenosides by ESI MS2 was studied. In chapter 6,the characteristic spectra of Compound Danshen Tablet established and compared byESI-MS and HPLC/DAD/MS, 6 known tanshinones and 3 saponins were speculated.In chapter 7, the advantage and disadvantage of the strategy, using the ESI ITMS andLC/MS techniques for study of characteristic spetra of danshen and Compound Danshen Tablet, were summerized. The third section (chapter 8) studied the fragmentation mechanism of six alkaloids,dihydronitidine, dihydrochelerythrine, 8-acetonyl dihydronitidine,8-acetonyldrochelerythrine, nitidine and 1,3-bis (8-dihydronitidinyl)-acetone, by ESIMSn. Tandem mass spectrometry experiments indicated that different substitutionsites of the methoxyl groups at C-9 and C-10 or at C-10 and C-11 determined thedifferent abundances of the MS2 fragmentation ions using the same collision energy.According to the different abundances of MS2 product ions, positional isomericbenzo[c] phenanthridine alkaloids can be differentiated. Moreover, ten constituents inthe crude alkaloids extract from the roots of Zanthoxylum nitidium were rapidlyidentified by high-performance liquid chromatography coupled with tandem massspectrometry (HPLC-MSn), through comparing the retention times and ESI MSn spectra with the authentic standards. The fourth section (chapter 9) is a review on HPLC-MS method development in drug metabolism studies.

与黑素生成相关的生化指标测定为主的美白评价体系的初建

近年来，随着黑素细胞生物学的发展和对美白剂功效研究的不断深入，美白剂对皮肤正常生理潜在的负面影响正逐渐为人们所重视 ，仅仅通过临床皮肤敏感试验已远不能给以科学的解释，因而建立一个科学量化的美白剂评价体系就显得尤为迫切和必要。本文工 作旨在将体外黑素细胞原代培养与黑素生成相关的生化指标（包括：黑度，细胞量，铬氨酸酶TYR，多巴色素异构酶DT酶活的）， 检测相结合，并联系细胞学观察，从而形成一整套相对完善，定性定量的研究美白剂功效的评价体系。通过测定外加a-MSH,内皮素 ET-1及其拮抗剂GD2168后黑素细胞内上述生化指标的变化，不仅验证了a-MSH，内皮素ET-1的促黑作用，内皮素拮抗剂GD2168的美 白功效，而且还体现出本评价体系不同于国内现有的其它美白评价体系的独特优势。首先，本评价体系在国内为首家将原代培养的 黑素细胞用于美白评价，由于原代培养环境与体内皮肤生理环境的相似性，在体外对10-8mol/La-MSH产生了正常的应答，所以在评 价美白剂的功效时该培养体较之将黑素细胞孤立生长的纯化培养体系更为科学也更具有说服力。尤其值得一提的是，国内现有的生 化水平的美白评价多局限于对TYR活力的测定，而本体系的另一特点就是除了TYR外还增加了对TRP-2即DT酶活的测定，由于DT在维 持正常黑素细胞及皮肤生理上的重要意义，对其变化的研究往往可揭示出美白剂对皮肤的潜在毒性，本文通过测定并分析内皮素拮 抗剂GD2168对体外黑素细胞DT活力的下调作用，对其潜在的副作用进行了科学的预测，这项工作国内尚无人开展。Over the past few years, melanin cell research has experienced unprecedent impetus, which also contribute to the study on lightener's function especially it's potent skin damage. As a result, it's the high time to build a more accurate and complete evaluation system to investigate lightener's effects and by-effects as well. After normal human melanocytes were cultured primarily in vitro, the effects of a-MSH, endothelin-1(ET-1)and ET -1's antagonist GD2168 on melanogenesis were studied biochemically by measurement of melanin content, cell-number, tyrosinaseTYR activity and dopachrome tautomeraseDT activity. Compared with untreated cells, the treated cells responsed to 10-8mol/L a-MSH with the increase in all items. ET-1 induced both an increae in DT activity and melanin concent; however, the melanosynthesis increase was inhibited significantly in the present of GD2168. Trough above work, a new evaluation system of lightener has been established and confirmed to be feasible. Different from other evaluation systems present in country, this system used the primary culture, which was more consistent to the physiological circumstance. Moreover, the system added DT activity assay that help reveal the GD2168's potent side-effects, which would have been clouded or ignored if only TYR activity was assayed.

移动机器人运动目标跟踪系统设计

利用SONYEV-D31摄像机和自主研发的摄像机控制模块,构建了一套主动视觉子系统,并将该子系统应用于RIRA-II型移动机器人上,实现了移动机器人运动目标自动跟踪功能。RIRA-II移动机器人采用了由一组分布式行为模块和集中命令仲裁器组成的基于行为的分布式控制体系结构。各行为模块基于领域知识通过反应方式产生投票,由仲裁器产生动作指令,机器人完成相应的动作。在设置了障碍、窄通道以及模拟墙体的复杂环境下进行运动目标跟踪实验,实验表明运动目标跟踪系统运行可靠,具有较高的鲁棒性。

水下机器人主动升沉补偿系统研究

介绍一种基于水下机器人常规液压收放绞车的主动升沉补偿系统,利用加速度传感器获得母船的升沉运动信号,控制绞车的运转来降低母船的升沉运动对水下机器人的影响。通过理论计算建立主动升沉补偿系统的数学模型,仿真分析绞车运动对水下机器人升沉运动的补偿效果,并利用主动升沉补偿系统实验台验证基于常规液压收放绞车的主动升沉补偿方案的可行性。

有缆水下机器人主动升沉补偿系统的控制研究

在深海区域，海面的海况条件相对比较恶劣，支持母船受风、浪、涌、流影响而产生较大幅度的升沉运动对有缆水下机器人正常作业和收放操作有较大的影响，水下机器人中继器的升沉运动甚至可以造成系缆的损害而使机器人本体丢失。如何提高水下机器人在相对恶劣海况条件下的安全性能、特别是水下机器人与中继器安全的释放与回收成为当前深海有缆水下机器人开发所需要面临的一个重要问题。有缆水下机器人主动升沉补偿技术的研究，对于提高水下机器人在相对恶劣海况条件下的安全作业和收放具有重要的意义，对提高水下机器人抵御恶劣海况的能力具有重要的作用。 本文主要研究以液压绞车为执行机构的主动升沉补偿系统的控制。 研究了使用Kalman滤波方法根据测量得到的升沉加速度估计升沉运动加速度、速度和位移的滤波算法；建立了升沉补偿系统的模型，分析了升沉补偿系统的负载，以及升沉补偿对于液压系统功率、流量、压力的要求。 对电液比例阀的死区进行了补偿；设计了前馈控制算法，前馈控制简单实用，易于工程应用，能提高升沉补偿效率；但是其对参数敏感，需要实时调节控制预值，这些都会影响控制效果；为了得到更好的控制效果，设计了速度闭环的控制算法，结合升沉补偿系统可能功率不足的特点，需要估算其最大速度能力，先设置速度限制，将得到的升沉速度限制在速度能力范围内进行补偿，闭环控制具有抗干扰的能力，不需要实时调节控制预值，并且将正反方向的速度限制设为相同值时，补偿后的升沉位移不会漂移；针对系统功率有限和参数时变的特性，提出了智能预测控制算法，先是模型辨识，系统功率足够和功率不够时，模型结构不一样，需要在辨识时能识别处于哪种工况，并采用不同的控制策略，研究了功率足够时的自校正预测控制算法，使用智能预测控制算法，能够克服系统功率有限和参数时变给控制带来的困难。 建立了升沉补偿系统的matlab/simulink仿真模型和Amesim仿真模型，对功率足够和欠功率的情况进行了仿真，以验证控制的效果。 利用主动升沉补偿模拟液压绞车分析了控制预值实时调整的主动升沉补偿开环前馈控制的补偿效率。并利用作业型ROV收放系统的液压绞车进行了主动升沉补偿实验，实验表明分段死区补偿、前馈控制算法是有效的。

锦屏电站地下厂房卸荷岩体参数研究

It is a basic work to ascertain the parameters of rock mass for evaluation about stability of the engineering. Anisotropism、inhomogeneity and discontinuity characters of the rock mass arise from the existing of the structural plane. Subjected to water、weathering effect、off-loading, mechanical characters of the rock mass are greatly different from rock itself, Determining mechanical parameters of the rock mass becomes so difficult because of structure effect、dimension effect、rheological character, ‘Can’t give a proper parameter’ becomes one of big problems for theoretic analysis and numerical simulation. With the increment of project scale, appraising the project rock mass and ascertaining the parameters of rock mass becomes more and more important and strict. Consequently, researching the parameters of rock mass has important theoretical significance and actual meaning. The Jin-ping hydroelectric station is the first highest hyperbolic arch dam in the world under construction, the height of the dam is about 305m, it is the biggest hydroelectric station at lower reaches of Yalong river. The length of underground factory building is 204.52m, the total height of it is 68.83m, the maximum of span clearance is 28.90m. Large-scale excavation in the underground factory of Jin-ping hydroelectric station has brought many kinds of destructive phenomenon, such as relaxation、spilling, providing a precious chance for study of unloading parameter about rock mass. As we all know, Southwest is the most important hydroelectric power base in China, the construction of the hydroelectric station mostly concentrate at high mountain and gorge area, basically and importantly, we must be familiar with the physical and mechanical character of the rock mass to guarantee to exploit safely、efficiently、quickly, in other words, we must understand the strength and deformation character of the rock mass. Based on enough fieldwork of geological investigation, we study the parameter of unloading rock mass on condition that we obtain abundant information, which is not only important for the construction of Jin-ping hydroelectric station, but also for the construction of other big hydroelectric station similar with Jin-ping. This paper adopt geological analysis、test data analysis、experience analysis、theory research and Artificial Neural Networks （ANN） brainpower analysis to evaluate the mechanical parameter, the major production is as follows: (1)Through the excavation of upper 5-layer of the underground powerhouse and the statistical classification of the main joints fractures exposed, We believe that there are three sets of joints, the first group is lay fracture, the second group and the fourth group are steep fracture. These provide a strong foundation for the following calculation of and analysis; (2)According to the in-situ measurement about sound wave velocity、displacement and anchor stress, we analyses the effects of rock unloading effect，the results show a obvious time-related character and localization features of rock deformation. We determine the depth of excavation unloading of underground factory wall based on this. Determining the rock mass parameters according to the measurement about sound wave velocity with characters of low- disturbing、dynamic on the spot, the result can really reflect the original state, this chapter approximately the mechanical parameters about rock mass at each unloading area; (3)Based on Hoek-Brown experienced formula with geological strength index GSI and RMR method to evaluate the mechanical parameters of different degree weathering and unloading rock mass about underground factory, Both of evaluation result are more satisfied; (4)From the perspective of far-field stress, based on the stress field distribution ideas of two-crack at any load conditions proposed by Fazil Erdogan (1962)，using the strain energy density factor criterion (S criterion) proposed by Xue changming(1972)，we establish the corresponding relationship between far-field stress and crack tip stress field, derive the integrated intensity criterion formula under the conditions of pure tensile stress among two line coplanar intermittent jointed rock，and establish the corresponding intensity criterion for the exploratory attempt; (5)With artificial neural network, the paper focuses on the mechanical parameters of rock mass that we concerned about and the whole process of prediction of deformation parameters, discusses the prospect of applying in assessment about the parameters of rock mass，and rely on the catalog information of underground powerhouse of Jinping I Hydropower Station, identifying the rock mechanics parameters intellectually，discusses the sample selection, network design, values of basic parameters and error analysis comprehensively. There is a certain significance for us to set up a set of parameters evaluation system，which is in construction of large-scale hydropower among a group of marble mass.

东天山镁铁-超镁铁岩铜镍硫化物矿床通道式成矿机制与岩体含矿性评价研究

A mafic-ultramafic complex belt well developed in Eastern Tianshan, Xinjiang, NW China, which contains a series of Cu-Ni sulfide deposits. This area is the important production basis for Cu-Ni deposits, including Tulargen deposit, Hulu deposit, Huangshan-Huangshandong deposit, Hulu deposit, Xiangshan deposit, Tianyu deposit, Chuanzhu deposit. In China, especially Eastern Tianshan, it is prevalent that large Cu-Ni deposits occurred in small intrusions, typically including Jinchuan, Kalatongke, et al., so the ore-forming mechanism and evaluation rule for those small intrusions are very meaningful and of universal significance. On the basis of the research to typical Cu-Ni deposits, ore-forming conditions and processes are summarized through which to evaluate the ore-bearing potential for barren intrusions and unexplored mafic-ultramafic intrusions. By the contrast, metallogenic rule and mechanism of ore genesis are concluded, and evaluation system is preliminarily set up on the basis of these conclusions. Quantitatively simulation for the composition of olivine is introduced for the first time in China to discuss the interaction between magma and sulfide, and a new method to calculate the Mg-Fe composition of primitive magma is developed. Interaction between magma and sulfide liquid is used to get the Ni content in sulfide liquid. Sulfur isotopic characteristics in sulfide minerals in country rocks and ores are used to judge crustal sulfur introduction, which is applied for the first time in China. Re-Os isotopic characteristics are related to the ore-forming process, to interpret the process of enrichment of chalcophile elements. On the basis of the evaluation system, Mati, Chuanzhu, Luodong, Xiadong, those intrusions are evaluated to their ore-bearing potential. According to the studies to typical Cu-Ni deposits, conduit-type ore-forming model is set up, and the characteristics of the model are concluded systematically. The evaluation system and conduit-type ore-forming model can be helpful to the evaluation of mafic-ultramafic intrusions in this and similar mafic-ultramafic intrusion belts. The studied typical deposits and mafic-ultramafic intrusion include Tulargen deposit, Hulu deposit, Huangshandong deposit, Chuanzhu deposit, Mati intrusion，Luodong intrusion, Xiadong intrusion, and others. Through studies, there are similar characteristics for Tulargen and Hulu deposits in magma origin, composition of primitive magma（MgO=12.5%, FeO=12% and MgO=11%, FeO=10.5% respectively）, magma evolution, mechanism of sulfide segregation and conduit-type ore-forming process. By Re-Os isotopic system, the ore forming date of Tulargen deposit is 265.6±9.2Ma, which is consistent to regional metallogenic event, but little younger. The Mg-Fe composition of primitive magma of Baishiquan, Huangshandong area, Kalatongke is lower than that of Tulargen and Hulu deposit, showing common basalt composition. The Mg# value（Mg#=(Mg/Mg+Fe）increases gradually from Kalatongke to Baishiquan to Huangshan-Huangshandong East. Baishiquan intrusions show relatively higher crustal contamination by evidence of trace element, which indicates the lower magma original source, from depleted mantle to crust. One break is the discovery of komatiitic intrusion, Xiadong intrusion, which shows characteristics of highly magnesium (Max Fo=96). The primitive magma is calculated of MgO=28%，FeO=9%, belonging to komatiitic magma. Tectonic evolution of Eastern Tianshan is discussed. By the statistics of ore-forming data of porphyry copper deposits, magmatic sulfide Cu-Ni deposits, orogenic hydrothermal gold deposits, we believe that those deposits are the successive products of oceanic subduction, are and back-arc basin collision and post-orogenic extention. And Cu-Ni sulfide deposits and orogenic gold deposits occurred in the stage of post-orogenic extention. According to the conclusions, the conduit-type ore-forming mechanism of magmatic sulfide deposit is set up, and its characteristics and conditions are concluded as well. The conduit-type ore-forming system includes magma generation, sulfide segregation, enrichment of chalcophile elements, interaction of sulfide and magma, sulfide collection in limited space in magma conduit and bottom of the chamber, which make a whole ore-forming system.The ore-forming process of Cu-Ni sulfide deposits is concluded as three steps: 1. mantle derived magma rises upward to the middle-upper crust; 2. magma suffers crustal contamination of different degrees and assimilates crustal sulfur, which leads to sulfur saturation and sulfide segregation. Sulfide liquid interacts with magma and concentrates chalcophile elements; 3. enriched sulfide located in the conduit(Tulargen) or bottom of the chamber (Hulu). Depleted magma rises upward continuously to form barren complexes. For the practical cases, Tulargen deposit represents the feeding conduit, and Hulu deposit represents the bottom of the staging magma chamber. So the deeper of west of Tulargen and southwest of Hulu are the favorite locate for ore location. The evaluation for ore potential can be summarized as follows: (1) Olivine can be served as indicator for magma evolution and events of sulfide segregation; (2) Sulfur isotopic characteristics is an efficient method to judge sulfur origin for magmatic sulfide deposit; (3) Re-Os content of the ores can indicate interaction between sulfide and silicate magma and crustal contamination; (4) PGE mineralization is effected by degree of partial melting of mantle; (5) Cu/Zr is efficient parameter to judge sulfide segregation; (6) The effects of multiple magma fractionation and emplacement are important, for inverse order shows the destruction to previous solid lithofacies and orebodies. Mati, Chuanzhu, Xiadong, Luodong, mafic-ultramafic intrusions are evaluated using evaluation system above. Remarkable Ni depletion is found in olivine of Mati, and southwest of the intrusion can be hopeful location for ore location. Chuanzhu intrusion has remarkable evidence of sulfide segregation, but the intrusion represents the narrow feeder conduit, so the wide part of the conduit maybe the favorite location for sulfide to deposit. The ore potential of Luodong and Xiadong is not good. Both the intrusions show no Ni depletion in olivine, and there is no sulfide in country rocks, so no crustal sulfur is added into the magmatic system. For Sidingheishan, a very large intrusion, the phenomenon of sulfide segregation is found, but there are no favorite places for sulfide to deposit. So the Cu-Ni ore potential maybe not good, but PGE mineralization should be evaluated further.

上市公司经营管理者绩效－报酬与激励机制初探

This research aims at the CEO's (chief executive officer) incentive-reward system and investigates 456 companies that have come into the market. The structure and level of agent reward are analyzed. And the problem in the incentive-reward mechanism is brought forward. The agent's payments are poor comparing to their contributions. And stock is not a primary incentive. Bonus compensation is still the dominant incentive means. By questionnaire and interview, it was fond that matriel need was rank first among these CEOs'needs. These foundinds indicate that the agents' payment is too poor to work as an effective incentive. The corporation's agent incentive is not enough in fact. The two reasons about this problem lie in our institutions and traditional opinions about commerce. To solve this matter, we must establish a scientific and reasonable evaluation system and incentive-reward system. At the same time, the market system and corporation management mechanism are absolutely need.

电视广告作品评价的消费行为学研究

The quality of advertising copy is an important component of advertising service. An advertising system with only copy design and production but without evaluation is imperfect. Establishing an evaluation system of television advertising copy is the principal purpose of the present work. In terms of consumer behavior, the work focused on consumers' evaluation-in-general of T commercials. The research consisted of three subprograms. The first subprogrom was associated with the basic factors in the evaluation of television advertising copy. The second one was related to the relative importance of those basic factors. The last one was related to the way in which the consumers' synthetic evaluation of copy under multidimensions. These subprogram composed the evaluation system of television advertising copy. In the study of the first subprogram, by the use of a variaty of "multistage evaluation scale", a survey into consumers' evaluation-in-general of television ads was made, which obtained five factors, namely, credibility, attractiveness, suitability, cognition and affect impact, through factor analysis (Cum.Pct. = 56.2%, α = 0.84). The study of second subprogram acquired their relative weights by a popular method of weight in the area of decision analysis, the result was as followings: credibility-0.27, attractiveness-0.24, suitability-0.18, affect impact-0.16, cognition-0.15; and fanally, under the condition of quasi-experiment, the third studyestablished a mathematical model of the synthetic evaluation of television ad copy, which was expressed as O = ΣF * W, through a "synthetical" method of multidimensional decision making.

A multi-standard active-RC filter with accurate tuning system

A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning architec-ture is presented. It exhibits 1EEE 802. 11a/b/g (9.5 MHz) and DVB-H (3 MHz, 4 MHz) application. The filter exploits digitally-controlled polysilicon resistor banks and a phase lock loop type automatic tuning system. The novel and complex automatic frequency calibration scheme provides better than 4 comer frequency accuracy, and it can be powered down after calibration to save power and avoid digital signal interference. The filter achieves OIP3 of 26 dBm and the measured group delay variation of the receiver filter is 50 ns (WLAN mode). Its dissipation is 3.4 mA in RX mode and 2.3 mA (only for one path) in TX mode from a 2.85 V supply. The dissipation of calibration consumes 2 mA. The circuit has been fabricated in a 0.35μm 47 GHz SiGe BiCMOS technology; the receiver and transmitter filter occupy 0.21 mm~2 and 0.11 mm~2 (calibration circuit excluded), respectively.

Numerical simulation of an adaptive optics system with laser propagation in the atmosphere

A comprehensive model of laser propagation in the atmosphere with a complete adaptive optics (AO) system for phase compensation is presented, and a corresponding computer program is compiled. A direct wave-front gradient control method is used to reconstruct the wave-front phase. With the long-exposure Strehl ratio as the evaluation parameter, a numerical simulation of an AO system in a stationary state with the atmospheric propagation of a laser beam was conducted. It was found that for certain conditions the phase screen that describes turbulence in the atmosphere might not be isotropic. Numerical experiments show that the computational results in imaging of lenses by means of the fast Fourier transform (FFT) method agree well with those computed by means of an integration method. However, the computer time required for the FFT method is 1 order of magnitude less than that of the integration method. Phase tailoring of the calculated phase is presented as a means to solve the problem that variance of the calculated residual phase does not correspond to the correction effectiveness of an AO system. It is found for the first time to our knowledge that for a constant delay time of an AO system, when the lateral wind speed exceeds a threshold, the compensation effectiveness of an AO system is better than that of complete phase conjugation. This finding indicates that the better compensation capability of an AO system does not mean better correction effectiveness. (C) 2000 Optical Society of America.