A discrete square global grid system based on the parallels plane projection

Knowledge Innovation Project of Chinese Academy of Sciences [KZCX3-SW-347]; National Science Fund for Distinguished Young Scholar [40225004]

A discrete square global grid system based on the parallels plane projection

We developed a direct partitioning method to construct a seamless discrete global grid system (DGGS) with any resolution based on a two-dimensional projected plane and the earth ellipsoid. This DGGS is composed of congruent square grids over the projected plane and irregular ellipsoidal quadrilaterals on the ellipsoidal surface. A new equal area projection named the parallels plane (PP) projection derived from the expansion of the central meridian and parallels has been employed to perform the transformation between the planar squares and the corresponding ellipsoidal grids. The horizontal sides of the grids are parts of the parallel circles and the vertical sides are complex ellipsoidal curves, which can be obtained by the inverse expression of the PP projection. The partition strategies, transformation equations, geometric characteristics and distortions for this DGGS have been discussed. Our analysis proves that the DGGS is area-preserving while length distortions only occur on the vertical sides off the central meridian. Angular and length distortions positively correlate to the increase in latitudes and the spanning of longitudes away from a chosen central meridian. This direct partition only generates a small number of broken grids that can be treated individually.

An asymmetric MOSFET-C band-pass filter with on-chip charge pump auto-tuning

An asymmetric MOSFET-C band-pass filter(BPF)with on chip charge pump auto-tuning is presented.It is implemented in UMC (United Manufacturing Corporation)0.18μm CMOS process technology. The filter system with auto-tuning uses a master-slave technique for continuous tuning in which the charge pump OUtputs 2.663 V, much higher than the power supply voltage, to improve the linearity of the filter. The main filter with third order low-pass and second order high-pass properties is an asymmetric band-pass filter with bandwidth of 2.730-5.340 MHz. The in-band third order harmonic input intercept point(HP3) is 16.621 dBm,wim 50 Ω as the source impedance. The input referred noise iS about 47.455μVrms. The main filter dissipates 3.528 mW while the auto-tuning system dissipates 2.412 mW from a 1.8 V power supply. The filter with the auto-tuning system occupies 0.592 mm~2 and it can be utilized in GPS (global positioning system)and Bluetooth systems.

Net primary productivity and spatial distribution of vegetation in an alpine wetland, Qinghai-Tibetan Plateau

To initially describe vegetation structure and spatial variation in plant biomass in a typical alpine wetland of the Qinghai-Tibetan Plateau, net primary productivity and vegetation in relationship to environmental factors were investigated. In 2002, the wetland remained flooded to an average water depth of 25 cm during the growing season, from July to mid-September. We mapped the floodline and vegetation distribution using GPS (global positioning system). Coverage of vegetation in the wetland was 100%, and the vegetation was zonally distributed along a water depth gradient, with three emergent plant zones (Hippuris vulgaris-dominated zone, Scirpus distigmaticus-dominated zone, and Carex allivescers-dominated zone) and one submerged plant zone (Potamogeton pectinatus-dominated zone). Both aboveground and belowground biomass varied temporally within and among the vegetation zones. Further, net primary productivity (NPP) as estimated by peak biomass also differed among the vegetation zones; aboveground NPP was highest in the Carex-dominated zone with shallowest water and lowest in the Potamogeton zone with deepest water. The area occupied by each zone was 73.5% for P. pectinatus, 2.6% for H. vulgaris, 20.5% for S. distigmaticus, and 3.4% for C. allivescers. Morphological features in relationship to gas-transport efficiency of the aerial part differed among the emergent plants. Of the three emergent plants, H. vulgaris, which dominated in the deeper water, showed greater morphological adaptability to deep water than the other two emergent plants.

一种TEC地图构建方法与全球电子总含量的气候学研究

Global positioning system (GPS) can not only provide precise service for navigation and timing, but also be used to investigate the ionospheric variation. From the GPS observations, we can obtain total electron content (TEC), so-called GPS TEC, which is used to characterize the ionospheric structure. This thesis mainly concerns about GPS TEC data processing and ionospheric climatological analysis as follows. Firstly, develop an algorithm for high-resolution global ionospheric TEC mapping. According to current algorithms in global TEC mapping, we propose a practical way to calibrate the original GPS TEC with the existing GIM results. We also finish global/local TEC mapping by model fitting with the processed GPS TEC data; in practice, we apply it into the local TEC mapping in Southeast of China and obtain some initial results. Next, suggest a new method to calculate equivalent ionospheric global electron content (GEC). We calculate such an equivalent GEC with the TEC data along the geographic longitude 120°E. With the climatological analysis, we can see that GEC climatological variation is mainly composed of three factors: solar cycle, annual and semiannual variations. Solar cycle variation is dominant among them, which indicates the most prominent influence; both annual and semiannual variations play a secondary role and are modulated by solar activity. We construct an empirical GEC model driven by solar activity and seasonal factors on the basis of partial correlation analysis. Generally speaking, our researches not only show that GPS is advantageous in now-casting ionospheric TEC as an important observation, but also show that GEC may become a new index to describe the solar influence on the global ionosphere since the great correlation between GEC and solar activity factor indicates the close relationship between the ionosphere and solar activity.

基于GIS的高速公路养护管理信息系统的设计与开发

China is experiencing a rapid development of highway ever since 1990s. By the end of 2004, the total length of the highway summed up to 33 thousand kilometers, ranking 2n in the world. After the open of highway, the accumulation of time and traffic causes the decrease of its capability. To ensure its good quality, security and operation functions, we should take some reasonable measures to maintain it periodically. At present, a big problem is that the traditional maintain measures can no longer meet the increasing requirements. Due to the characters of highway, the relationship of various maintenance data and geographic positions is even closer than any others. If we wan to improve the quality and efficiency of the maintenance work, particularly when there is need for decision-making, a great number of data that is related to geographic positions are absolutely necessary. Evidently, Geographical Information System (GIS) has incomparably advantages in dealing with these spatial information. As a result, a management system for highway maintenance work based on GIS became inevitable for the development of the maintenance of highway. The purpose of this paper is to establish a management system for highway maintenance work base on Geographical Information System (GIS), Global Positioning System (GPS) and spatial database, to manage all kinds of problems encountered in the work, and to provide support on information and methods. My study mainly includes: (1) Analysis on the current status of the maintenance and management work; overview on the history of domestic and international highway maintenance management systems; identifying the necessity and importance for establishing a management system for highway maintenance work based on GIS. (2) Based on the requirement analysis, I proposed a general design for this management system, and discussed the objective, design principles, framework, systematical structure and function design. (3) Outdoor data collection is not only a prime way to understand the current situation of the road, but also an important method for data update after the system is put into use. This paper also intends to establish a set of plan to collect data efficiently and precisely which is based on GIS and GPS technologies. (4) The maintenance management database is a supporting platform for various maintenance decision-makings. Such decisions need the support of a great amount of data, which would cause other problems, such as the diversity of the data source, difference of data formats. This paper also discussed how to deal with these problems and establish such a database. (5) To propose an approach to assess the condition of pavement, based on GIS and related maintenance models. Among all the maintenance models, the two for assessing and forecasting pavement condition are the most important and mature. This paper also analyzed these two models and introduced them in terms of the integration of models. (6) This paper took the Guangshen Highway for example, explaining how to realize a GIS for management of highway maintenance work.

川西亚高山森林生态系统辐射传输研究

辐射传输研究是贯穿森林生态系统的纽带，太阳辐射为植物的生长发育提供光合能量、适宜的环境温度以及发育信息。一方面，气候变化使到达地面辐射能的质和量发生变化，影响到植被的生长发育，改变森林的结构，而森林结构的变化又会影响林冠内辐射能的分配和质量，这些变化会进一步影响到林下土壤温度，改变森林根系活性以及土壤营养转化的效率；连锁反应的结果有可能会使森林生态系统的生产力发生变化，改变碳素和氮素源库的调节方向，从而反馈影响地球气候系统。另一方面，人类作为生态系统的成员，必然需要森林生态系统为其提供更多的原材料和更好的生态服务功能，如何实现这些目标，就需要人类适度调整干预方式和频度，达到预期的目的。本文在建立适合于川西亚高山森林的叶面积测量技术、光照辐射模型和土壤温度变化模型的基础上，对川西亚高山地带森林生态系统的辐射传输特征进行了分析，并从森林结构的角度探讨了林分内的辐射分布以及对土壤温度的影响。主要成果如下： 1. 提出了一种照相法测量叶面积的方法。通过对摆放在平面上的叶片照相，利用投影变化，把非正射图像转化为正射图像，然后经过计算机图像处理得到每一片叶片的面积、周长、长度、宽度等信息。这种方法可使用户以任意方向和距离拍摄处于平面上的叶片，能同时处理大量的叶片，适于野外离体或活体叶片测量。叶片面积分辨率可调，分辨率可以与常用的激光叶面积仪相近甚至更高，而且叶片图像可以存档查询。 2. 提出一种模拟林内光照变化的模型。利用林冠半球照片，记录视点以上半球内的林冠构件空间分布，作为林冠子模型；天空辐射子模型采用国际照明委员会(CIE)的标准晴天和阴天以及插值模型。该模型能够模拟林下某一位点处的实时光斑变化。 3. 提出一种土壤温度变化模型。把土壤视为具有容量和阻力性质的结构，利用电阻和电容器件构建土壤能量分布模型。外界太阳辐射能经过植被以及其它一些能量分配器后进入土壤，其中有一部分转化为土壤势能，即土壤温度。土壤温度的变化类似于电池的充放电过程。在已知模型参数的情况下，可以从太阳辐射计算土壤温度的变化。在模型参数未知的情况下，通过输入和输出值推算模型的参数，而模型参数中的时间常数与土壤组成和含水量有关，这样就可以知道土壤水分的变化情况。 4. 从王朗亚高山森林典型样地林分结构的测量获得林地三维结构图、树冠形态、叶面积密度等参数，这些参数输入到Brunner (1998)开发的tRAYci 模型中计算出一段时间内林分任意位置处的光照值。与林下辐射计测量值以及半球照片计算结果的比较，该模型基本上能够满足对林分光环境了解的要求。 5. 从川西亚高山森林生产力的角度，探讨了森林生产力研究的方法以及川西地区的研究历史和成果，发现了其中的一些规律和问题，特别是在叶面积测量上，还没有使用标准的叶面积指数定义。综合来看，川西地区针叶林叶面积指数(单位土地面积上植物冠层总叶面积的一半) 应在4-5 之间。降雨丰富的华西雨屏带是川西地区森林生产力最高的地区，而向西北森林生产力逐渐降低。川西地区云冷杉林森林生产力平均约为600 gDM m-2 a-1，但是根据辐射能计算的潜在生产力则达到1800 gDM m-2 a-1。实际与潜在森林生产力的巨大差异说明其它因子对生产力的影响。 6. 王朗亚高山3 个典型森林林分中，白桦林样地(BF) 林下草本以糙野青茅、牛至、紫菀等喜阳性物种为主，林下透光度较高；冷杉林样地(FF) 林下透光度最低，以喜阴性物种水金凤、蟹甲草、囊瓣芹等为主；而云杉林样地(SF)林分林龄最大，林下透光度介于冷杉林和白桦林之间，草本层仍然以喜阴性物种东方草莓、紫花碎米芥、酢浆草等为主。冷杉林和云杉林的灌木层也很丰富，卫矛属、五加属、茶藨子属、忍冬属植物很丰富，而在白桦林则以栒摘要子属、榛子属、鹅耳枥属等植物为主。藓类植物在云杉林中最丰富，并且形成毯状层，其它两个林分则很稀少。3 个样地林分结构与林下光环境有很强的相关性，从光环境特征可以在一定程度上推测林分的结构。各样地单纯从乔木层材积推算的NPP 排列顺序为BF>FF>SF，与林下辐射透射率和林分年龄的顺序相同，暗示辐射对群落演替过程的驱动作用。 7. 用半球照相法测得BF、FF 和SF 3 个样地的有效叶面积指数以SF 样地最高，BF 最低。如果考虑针叶树叶片在小枝上的丛聚分布，利用北方针叶林的数值进行校正，则SF 样地LAI 显著增加(达到89%)，其它样地的LAI 基本不变甚至有所下降。校正后的数值与文献中地面测量的结果较相近，说明在使用半球照相法测量川西亚高山针叶林LAI 时必须加以校正。 8. 在3 个样地中，白桦、岷江冷杉和方枝柏种群为丛聚分布，紫果云杉在FF和SF 样地中基本上为随机分布。3 个物种出现丛聚分布的最短距离约为2m，在最短距离以内则为随机分布。最短距离可能与树冠大小有关，种子传播特征以及对光照的需求状况可能是造成这种分布格局类型的原因。 Radiative transfer plays a key role in forest ecosystems. Solar radiation providesenergy for photosynthesis, appropriate ambient temperature and development informationfor plants. However, quality and quantity of radiation reaching land surface are affected byweather and subsequently influence the growth and development of plants, which in turnchanges the budget of radiation in forest. Soil temperature changes with the variation ofradiation under forest canopy and influences the activity of roots and rate of nutrientturnover. Thus, any changes of radiation will induce chain reactions in the entireecosystem and display in the value of net primary productivity which will possibly shiftthe relationship between carbon source and sink at local or regional scale and feed back tothe global climate system. On the other hand, as a component of ecosystems, humanbeings of course need to demand more materials and better service from ecosystems. Forthese purpose, man must adapt their pattern and frequency of interference to ecosystems.This paper aims to research on the canopy structure, the radiation distribution and theirinfluence on soil temperature from the process of radiative transfer in subalpine forestecosystem of western Sichuan. The main results are: 1 Present a new photogrammetric method for leaf area. The main idea is to convertnon-vertically taken images of planar leaves to orthoimages through projectivetransformation. The resultant images are used to get leaf morphological parametersthrough image processing. This method enables users to take photos at almost anyorientation and distance if only the leaves are placed on same plane, and to processlarge quantity of leaves in a short time, which is suitable for field measurement. Theresolution of leaf area is adjustable to fit for special requirement. 2 A model using hemispherical photos combining with solar tracks and radiation courseis provided to simulate light variation in forest. The hemispherical photos of canopyrecord the real spatial distribution of each element of plants viewed from a point. Skyradiance is simulated with CIE standard clear sky or cloudy sky model. This modelcan be used to simulate real time light variation under canopy. 3 Present a soil temperature model. Soil could be regarded as a body of resistor andcapacitor. Some of the budget of solar radiation in soil body is transformed into soilpotential energy, the soil temperature. Variation of soil temperature is driven by solarradiation, vegetation, soil properties, etc. This model has two parameters, one of whichis time constant and is related to soil water content. The inversed model can be used tosimulate the variation of soil water. 4 By using model tRAYci developed by Brunner (1998), the 3-D distribution of light inthree subalpine forest stands of Wanglang Nature Reserve has been simulated andvalidated with value of radiometers in these stands. This model can basically satisfythe need for understanding light regimes of these stands. 5 Present some principles and questions of NPP (net primary of productivity) researchesin western Sichuan. The standard leaf area index (LAI) defined by Chen and Black(1997) has not been used in this region. Total leaf area and projected leaf area indexare still used in NPP researches which may differ around 1-fold in magnitude. Thestandard LAI which is a half of total leaf area above unit land area should be between4 and 5 for typical subalpine coniferous forest of western Sichuan concluded fromliteratures. The maximum forest NPP occurs in West China rain belt and decreasesnorthwestwards. Average NPP of spruce-fir forest in western Sichuan is about600gDM m-2 a-1, which is below the potential NPP of 1800gDM m-2 a-1 based onmeasured radiation in this region. The significant difference between potential and realNPP suggests that other factors influence the growth of stands. 6 In the three subalpine forest stands of Wanglang Nature Reserve, herbage layer ofAbstractbirch stand (BF) with age of 40 is dominated by heliophytes of Deyeuxia scabrescens,Origanum vulgare, Aster tongoloa etc.. However, both of the other two stands aredominated by shade tolerent species, such as Impatiens noli-tangere, Impatiensdicentra, Cacalia deltophylla and Pternopetalum tanakae etc. in fir stand (FF) withage of 180 and Fragaria orientalis, Cardamine tangutorum and Oxalis corniculata etc.in spruce stand (SF) with age of 330. Shrub species in the latter two stands arerelatively rich, typical dominant genera being Euonymus, Acanthopanax, Ribes andLonicera. Birch stand has relatively sparse shrubs dominated by genera of Cotoneaster,Corylus and Carpinus. Mosses are significant only in spruce stand. The canopystructure controls the light regime of stand, which influence the composition of herblayers beneath the canopy. This light regime-community structure relationship can beused to infer the herb community from canopy structure. The NPP derived from timbervolume of arbor layer of the three stands decreases from BF to SF, which is in thesame order of transmitted total radiation under canopy and age of these stands,suggesting the driving effect of radiation in the succession of community. 7 The highest effective LAI of the three stands obtained by hemispherical photos is inplot SF and lowest in plot BF. After rectification of the clumping effect of leaves onshoot, the real LAI in plot SF increases significantly (89%) and approximate to theaverage LAI of coniferous forest in western Sichuan. Therefore, the LAI obtainedfrom hemispherical photos needs rectification for clumping effect. 8 Spatial distribution pattern for Betula platyphylla, Abies faxoniana and Sabinasaltuaria is clumpy, but Picea purpurea almost random in plot FF and SF. The shortestdistance for clumpy distribution for Betula platyphylla and Sabina saltuaria is 1.5m,and 2m for Abies faxoniana. And random pattern for these trees is exhibited within thisrange which almost coincides with the diameter of crown. Seed dispersalcharacteristics and light requirement may be the reason for different spatial pattern.

集散式束流诊断器件定位系统

在很多束流诊断系统中，步进电机已被广泛的用于束流诊断器件定位的动力驱动。为了实现对步进电机的本地控制、远地控制和集中控制，我们开发了基于86BYG45OB-O2型步进电机的集散式束流诊断器件定位系统。本文全面论述了一个基于半双工RS-485总线集散式控制系统的设计；根据束流诊断器件定位控制系统需求出发，阐明了控制系统的开发背景、基本结构的建立、硬件设计方案和软件的实现。本论文主要包括五部分：第一部分介绍了在兰州放射性核次级束流装置（RIBL）中，束流诊断器件定位的特点和要求。第二部分分析了原有束流诊断定位系统的结构和不足，说明了集散式束流诊断器件定位系统的结构和优点。第三：部分介绍了Rs-232、RS-422和RS-455及RS-485组网中的有关问题。第四部分详细论述了本地控制单元的硬件和软件的设计。第五部分介绍了远地控制单元的软件设计。

基于眼固定安装方式的机器人定位系统

研发了基于眼固定安装方式的机器人定位系统,提出了一种方便有效的手眼标定方法。通过最小二乘法求解手眼坐标的变换关系,再根据工作台平面与摄像机成像模型的约束关系,求解出目标物体的三维位姿,并最终实现了机械手的精确定位。

应用于自动化生产线的视觉机器人系统

应用于融动化生产线基于眼固定安装方式的机器人定位系统,提出了一种方便有效的手眼标方法。通过最小二乘法求解手眼坐标的变换关系,再根据工作台平面与摄像机成像模型的约束关系,求解出目标物体的三维位姿,并最终实现丁机械手的精确定位。

传感器网络中无线电干涉定位系统的多径误差分析

根据多径信号的物理特性,从理论上推导了镜反射的多径误差简便模型,基于该模型进行了无线电干涉定位系统的多径误差分析.讨论了衰减因子、天线高度和水平距离等多径参数对测量结果的影响,并且进行了仿真计算和分析.结果表明,高精度定位必须考虑多径效应.

An Obstacle Cluster Based Data Fusion Method for Mobile Robot

首先给出了一种通过融合多个超声波传感器和一台激光全局定位系统的数据建立机器人环境地图的方法 ,并在此基础上 ,首次提出了机器人在非结构环境下识别障碍物的一种新方法 ,即基于障碍物群的方法 .该方法的最大特点在于它可以更加简洁、有效地提取和描述机器人的环境特征 ,这对于较好地实现机器人的导航、避障 ,提高系统的自主性和实时性是至关重要的 .大量的实验结果表明了该方法的有效性 .

用于移动机器人的视觉全局定位系统研究

本文叙述了用于移动机器人自主导航定位的一种视觉全局定位系统技术 .该视觉定位系统由 L ED主动路标、全景视觉传感器和数据处理系统组成 .本文主要介绍了为提高全景视觉图像处理速度和环境信标识别可靠性、准确性的应用方法 ,并给出了实验结果 .实验表明 ,视觉定位是具有明显研究价值和应用前景的全局导航定位技术

移动机器人激光全局定位系统的算法研究

介绍了一种新型的移动机器人激光全局定位系统。重点讨论了结构化环境中移动机器人的全局定位方法 ,提出了一种新的基于最小二乘法的迭代搜索定位算法。全方位移动机器人平台上进行的定位实验 ,证实了该算法的有效性。

基于LBL声信标的AUV快速精确定位

长基线声学定位系统是水下机器人广泛应用的外部导航设备。以对"CR-02"6000m自治水下机器人(简称AUV)技术的深入开发为背景,提出在原有长基线(LBL)定位系统的基础上增加导航功能的方案。由于海水介质非均匀性与复杂的时空变化特性,给基于测距的位置计算带来很大困难。采用平均声速法计算耗时小而误差大,波阵面定位法误差小而耗时大。为解决这个矛盾,根据AUV深度传感器给出的深度信息,采用本征声线快速计算方法解算AUV的水平面位置。与波阵面法、平均声速法进行了综合比较。仿真实验表明该方法具有优良的性能,满足AUV导航需要。