Scanning electron microscopy of Aspidogaster ijimai Kawamura, 1913 and A-conchicola Baer, 1827 (Aspidogastrea, Aspidogastridae) with reference to their fish definitive-host specificity

Two species of aspidogastreans, namely Aspidogaster ijimai and A. conchicola, were studied by scanning electron microscopy. In nine lakes and an old river course, the Tian'ezhou oxbow, investigated in the flood plain of the Yangtze River, A. ijimai was obtained from the common carp (Cyprinus carpio) in three lakes, and A. conchicola from the black carp Mylopharyngodon piceus in three lakes and the oxbow. In none of the localities, however, were the two species found together. It is suggested that A. ijimai may be considered as a specialist parasite for the common carp, at least in the flood-plain lakes of the Yangtze River. The two parasites were similar in many aspects of their morphology. Their bodies can both be separated into a dorsal part and a ventral disc, with the body surface of the dorsal part elevated by transverse folds, and the disc subdivided into alveoli by transverse and longitudinal septa, although the number of alveoli was different in the two species. The depression on the ventral surface of the neck region was prominent for both species, and their ventral disc was covered densely with non-ciliated bulbous papillae. The position of mouth, osmo-regulatory pore and marginal organ was also similar for A. ijimai and A. conchicola. However, microridges in the trough of the folds in the neck region and numerous small pits on the upper part of the septa were found exclusively in A. ijimai, but uniciliated sensory papillae in A. conchicola.

Numerical Simulation of 3D-Thermal Field with Phase Transformation

以激光熔凝表面强韧化处理为背景,应用空间的弹塑性有限单元和高精度的数值算法、同时考虑材料组织性能的变化来模拟材料的温度场。主要研究激光熔凝加工中瞬时温度场数值模拟,同时考虑相变潜热的影响,为第二步热应力场及残余应力的数值模拟做准备。最后用算例验证了模型的正确性,并给出了不同时刻温度场的分布。

水平荷载作用下张力腿平台吸力式基础的物理模拟

介绍了张力腿平台吸力式基础在水平静载和循环动荷载作用下的离心模型试验。通过水平静载离心试验获得了基础的水平承载力。利用电磁式激振器模拟动荷载，研究在动荷载作用下吸力式基础的动力响应，并比较了荷载强度和基础刚度对基础动力响应的影响。分析结果表明，在动荷载作用下，泥面下1～2m深度内土体中孔压最大。当动荷载强度超过临界承载力时，基础周围土体有非常强的液化可能性。综合孔压变化和基础沉降规律分析基础有两种可能的破坏模式：振动最初1～2h内的液化破坏和长时间激振后沉降过大引发的问题。将单桶连接成多桶基础，增大基础刚度，在相同动载强度下，周围孔压增长和激振沉降均小于承受相同荷载条件的单桶基础。

Orientation preference and fractal character of short fatigue cracks in a weld metal

Short fatigue crack behaviour in a weld metal has been further investigated. The Schmid factor and the fractal dimension of short cracks on iso-stress specimens subjected to reversed bending have been determined and then applied to account for the distribution and orientation characteristics of short fatigue cracks. The result indicates that the orientation preference of short cracks is attributed to the large values of Schmid factor at relevant grains. The Schmid factors of most slip systems, which produced short cracks, are less than or equal to 0.4. Crack length measurements reveal that short crack path, compared to that of long crack, possesses a more stable and relatively larger value of fractal dimension. This is regarded as one of the typical features of short cracks.

负啁啾高强度飞秒脉冲在正常色散材料中传输特性研究

利用块状正常色散材料作非线性介质，实验研究了负啁啾强激光飞秒脉冲在正常色散材料的传输过程中，脉冲波形及频谱随入射脉冲能量的变化特性．实验发现，负啁啾脉冲经过材料后激光光谱在被整形和压缩的同时，脉冲宽度也被压缩．实验获得的压缩脉冲宽度短于相等光谱宽度下的双曲正割转换极限脉冲宽度。数值模拟结果显示，在实验条件下模拟结果具有同样的变化特性．

Self-compression of femtosecond pulses in argon with a power close to the self-focusing threshold

Self-compression of femtosecond pulses in noble gases with an input power close to the self-focusing threshold has been investigated experimentally and theoretically. It is demonstrated that either multiphoton ionization (MPI) or space time focusing and self-steepening effects can induce pulse shortening, but they predominate at different beam intensities during the propagation. The latter effects play a key role in the final pulse self-compression. By choosing an appropriate focusing parameter, action distance of the space time focusing and self-steepening effects can be lengthened, which can promote a shock pulse structure with a duration as short as two optical cycles. It is also found that, for our calculation cases in which an input pulse power is close to the self-focusing threshold, either group velocity dispersion (GVD) or multiphoton absorption (MPA) has a negligible influence on pulse characteristics in the propagation process.

体布拉格光栅外腔半导体激光器光谱特性研究

用体布拉格光栅(VBG)作为反馈元件与瓦级半导体激光器(LD)以及快轴准直柱透镜构成一个可以将半导体激光器的工作波长稳定在体布拉格光栅布拉格波长处的外腔激光器。测量了体布拉格光栅外腔激光器的波长稳定性与其工作电流、热汇温度、激光束准直装置等因素的关系。分析了波长稳定效果与半导体激光器增益谱特性、外腔结构参量等因素的关系。研究表明,在相同的工作电流、热汇温度下,当准直柱透镜直径为0.4 mm时的波长稳定效果较好;在此情况下,当热汇温度控制在30 ℃,工作电流从0.5 A增加到1.5 A的测量范围内,以及当工

Polarization analysis and experimental implementation of PLZT electro-optical switch using fiber Sagnac interferometers

The polarization characteristics of electro-optical (EO) switches using fiber Sagnac interferometer (FSI) structures are theoretically investigated. Analytical solutions of output fields are presented when the twists and birefringence in a Sagnac loop are considered. Numerical calculations show that the twists of fiber, the orientation of the inserted phase retarder, and the splitting ratio of the coupler will influence both the output intensity and the output polarization properties of the proposed switch. A polarization-independent EO switch based on a Sagnac interferometer and a PUT bar was experimentally implemented, which showed good coincidence with the analytical results. The experiment showed a switch with 22 dB extinction ratio and less than 31.1 ns switching time. (c) 2006 Optical Society of America.

板条激光放大器中寄生振荡的研究

寄生振荡的存在使得放大器在信号光到达之前消耗了大量的反转粒子数,降低了放大器的激光增益和储能效率,严重地影响了激光放大器的性能,尤其对高功率激光放大器。在理论分析和实验研究的基础上,以Nd∶YAG晶体板条为例,用8条半导体激光阵列对晶体进行双侧抽运,研究了高功率激光放大器的寄生振荡现象,分析了板条晶体寄生振荡产生的原因,并详细比较了晶体在不同的抽运功率和表面处理下的放大效果,得到了2倍的单程放大,当输入能量为140 mJ时,获得了278 mJ的激光输出。

睡莲科的花的生物学和生殖形态学研究

最近的一系列分子系统发育分析一致认定睡莲目为3 个最早的被子植物谱系（ 即包括Amborellaceae 、睡莲目和一个由八角目、Trimeniaceae 、 Austrobaileyaceae 组成的分支在内的ANITA）之一，这些研究结果和新近发现的早白垩世时期的睡莲类植物花化石的记录，支持过去长期认为睡莲目代表原始类群的观点。作为睡莲目组成之一的睡莲科，虽然在被子植物分类系统中一直处于关键的核心的系统发育位置，但对于这个科的生殖生物学和生殖形态学的研究还没有得到足够的重视。本文对睡莲科的王莲属、萍蓬草属和睡莲属的花的生物学、 Nuphar microphylla 的胚胎学、睡莲科的花粉形态学、睡莲科的胚珠和种子的发育形态学、以及睡莲科的柱头的形态解剖学开展了深入细致的研究工作。 本文所研究的睡莲科植物的花都具有开花生物钟的特性，在开花时期花器官的开放和闭合呈现有规律的运动。睡莲科的有些种植物（如睡莲属的一些种）的花是白天开放晚上闭合，而另外一些种（如王莲属）的花却是晚上开放白天闭合。睡莲科的不同物种的花的开花天数不同，一般是2 到数天。花大多是雌性先熟的，通常从开花的第二天开始释放花粉。睡莲科的不同属植物在开花时间，花的气味，花的颜色，各种花器官的形状和功能，以及传粉者方面存在很大差异。克鲁兹王莲的花具有大型的，单生的，多数花器官，花器官呈现有规律的开放和闭合运动，雌性先熟，能散发强烈气味，能够改变颜色，温度发生变化等特征。作者认为这些特征是高度特化的，它们适应于昆虫传粉。对Nuphar microphylla 的花的生物学研究支持Lippok 等人的观点：在任何居群，蝇、蜜蜂和甲虫对传粉贡献的相对大小更多地取决于这些昆虫的相对丰富度和可替换食物的多少，而不是取决于旧世界与新世界的萍蓬草属植物之间的雄蕊长度的差异。 本研究首次在Nuphar microphylla 中发现了一种新的4 细胞5 核雌配子体（具有1 个卵细胞，2 个助细胞和1 个具有2 个单倍体核的中央细胞）类型，这种雌配子体通过受精作用将产生三倍体的胚乳。作者认为这种雌配子体可能是最小的性功能单位，代表着被子植物的祖征。 睡莲科是一个具有多形态花粉的科，花粉沟有远极单槽和环槽两种类型。当前研究建议萍蓬草属的远极单槽花粉在睡莲科中是最原始类型。花粉形态学研究支持睡莲科是一个原始类群的观点。在所观察的睡莲科植物中，内珠被都作为一圈圆形的突起被产生，而外珠被是半圆形的，稍后形成兜状，在珠柄的凹面侧没有外珠被。在印度红睡莲、埃及白睡莲、墨西哥黄睡莲、芡实、以及克鲁兹王莲的胚珠的发育后期，珠柄的凹面侧产生不同长度的外珠被，所以它们成熟胚珠的外珠被为杯状。作者认为睡莲科的兜状的外珠被是原始的，杯状的外珠被是进化的。睡莲科的柱头形态高度多样化。睡莲属的柱头表面分布有许多拥挤的多细胞的乳头，萍蓬草属和芡实属的柱头是分泌性的，柱头表面具有单细胞乳突。王莲属柱头表面形成许多不规则的隆起。柱头形态学研究支持睡莲属和Ondinea 具有密切的亲缘关系的观点。