体布拉格光栅外腔半导体激光器光谱特性研究

用体布拉格光栅(VBG)作为反馈元件与瓦级半导体激光器(LD)以及快轴准直柱透镜构成一个可以将半导体激光器的工作波长稳定在体布拉格光栅布拉格波长处的外腔激光器。测量了体布拉格光栅外腔激光器的波长稳定性与其工作电流、热汇温度、激光束准直装置等因素的关系。分析了波长稳定效果与半导体激光器增益谱特性、外腔结构参量等因素的关系。研究表明,在相同的工作电流、热汇温度下,当准直柱透镜直径为0.4 mm时的波长稳定效果较好;在此情况下,当热汇温度控制在30 ℃,工作电流从0.5 A增加到1.5 A的测量范围内,以及当工

An external-cavity semiconductor laser was built by using a semiconductor laser, collimating cylindrical column lens for fast axis beam and a volume Bragg grating (VBG) as a feedback element to get semiconductor lasers wavelength locked to the Bragg wavelength of the VBG. Its spectral characteristics varied with pump current, heat-sink temperature and different beam collimation optics were measured experimentally. The dependence of the spectral stabilization on gain spectrum of the laser and the parameters of the external cavity were analyzed. The results indicated that good wavelength stabilization could be obtained when a collimating cylindrical lens with diameter of 0.4 mm was used. In the case semiconductor lasers wavelength was measured to be locked at the Bragg wavelength of VBG in the driving current range from 0.5 A to 1.5 A when the heat-sink temperature kept at 30 ℃, and in the temperature range between 20 ℃ and 25 ℃ when the driving current applied at 1.5 A. Compared with spectra of the semiconductor laser at free running, it means that wavelength stabilization can be obtained when difference between the VBG peak and the laser wavelength at free running is smaller than 2.6 nm. The experiment showed also that wavelength stabilization became degraded when the difference increased to larger than 4.8 nm.