双面太阳电池垂直安装发电性能的测试

双面太阳电池是一种非常规太阳电池。本文通过建立光伏组件-控制器-蓄电池-负载试验系统，对日立公司双面受光单晶硅太阳电池组件分别在东西和南北朝向情况下垂直地面安装时的功率输出特性进行了测试和分析。根据应用测试结果，总结了双面受光太阳电池的应用优缺点和可能的应用方式。

Small-signal and large-signal performance test of high-speed optoelectronics devices

This paper presents measurement methods for determining the reflection coefficients and frequency responses of semiconductor laser diodes, photodiodes, and EA modulator chips. A novel method for determining the intrinsic frequency responses of laser diodes is also proposed, and applications of the developed measurement methods are discussed. We demonstrate the compensation of bonding wire on the capacitances of both the submount and the laser diode, and present a method for estimating the potential modulation bandwidth of TO packaging technique. Initial study on removing the effects of test fixture on large-signal performances of optoelectronic devices at high data rate is also given.

同源四倍体与二倍体水稻的遗传差异及产量、品质性状研究

本文以中国科学院成都生物研究所培育的同源四倍体水稻和二倍体水稻为材料，进行遗传差异及产量、品质性状的研究：1、以二倍体水稻为对照，研究了同源四倍体水稻在2004 年和2005 年的结实情况。结果同源四倍体的花粉育性、结实率均不同程度下降，尤其低代材料更是大幅度下降。F 检验表明，同源四倍体不同个体间的各产量性状均差异显著，说明其具有很大的遗传改良潜力。从1996 年到2005 年对部分同源四倍体水稻进行了连续选择改良，T 检验表明经过9 年的选择改良，其结实率显著提高。本文还对同源四倍体水稻各产量性状间的相关性进行了分析,结果结实率与花粉育性、穗着粒数、穗实粒数极显著相关；理论产量与花粉育性、有效穗数、穗着粒数、穗实粒数、结实率及千粒重极显著相关。i2、用(CT)n 微卫星标记和PCR-Acc Ι分子标记对40 份同源四倍体和14 份二倍体水稻Wx 基因进行研究。结果，(CT)n 微卫星标记检测，Wx 基因呈Wx1、Wx2 和Wx3 3 种多态性；PCR-Acc Ι 检测，Wx 基因表现为G-型和T-型。测定稻米直链淀粉含量(AC)、胶稠度(GC)和糊化温度(GT)，并探讨其与Wx 基因的关系，结果，二倍体和同源四倍体水稻均存在：Wx 基因型相同，AC 差异较小，Wx 基因型不同时，AC 差异较大，Wx1 基因型品种AC 最高， Wx2 基因型品种AC 次之，Wx3 基因型品种AC 最低；基因型相同时，同源四倍体AC 低于二倍体；同源四倍体与对应二倍体间，Wx 基因型相同时，AC 差异很小；而Wx 基因型发生变异时，AC 差异很大。同时，进行相关性分析，结果二倍体和四倍体水稻均存在AC、GC 与Wx 基因密切相关；而GT 与Wx 基因相关不显著。综合分析，(CT)n微卫星标记与PCR-Acc Ι 分子标记检测的相关系数为0.842，呈极显著正相关，可以将其结合起来进行同源四倍体新品种的选育和改良。3、利用RAPD 技术，对同源四倍体和二倍体水稻的遗传差异进行分析。17条引物在同源四倍体中扩增出178 条带（PPB＝81.5%），在二倍体中扩增出173条带（PPB＝76.3%）；同源四倍体和二倍体的Shannon 遗传多样性指数分别为0.4848 和0.4679，多态信息量分别为0.3301 和0.3216，遗传距离分别为0.3572和0.3460；同源四倍体与其对应二倍体间遗传距离为0.1914-0.4633，平均为0.2914。表明同源四倍体的遗传多样性高于二倍体，且同源四倍体与其二倍体之间存在较大的遗传差异，这些将为水稻品种改良和新品种选育提供科学依据。上述产量、品质性状及遗传差异分析的结果，不仅有利于加快同源四倍体水稻的遗传改良进程，而且为进一步研究、利用同源四倍体水稻奠定了初步基础。 AbstractStudy on genetic diversity, yield characters and quality traitsof autotetraploid and diploid riceLiu Yuhua (Botany)Directed by Associate Prof. Tu ShengbinIn this study, diploid and autotetraploid rice, which were cultivated in ChengduInstitute of Biology were analyzed in genetic diversity, yield characters and qualitytraits.In the study, 2 diploid and 29 autotetraploid rice(2n=4x=48) materials, including4 preliminary and 25 advanced generation, were investigated for yield characters.Compared with diploid check, the pollen fertility and seed set of autotetraploiddeclined dramatically, especially in preliminary generation. F-test indicated that therewere remarkable differences among different varieties, showing that autotetraploidmaterials had strong potential for improvement. From 1996 to 2005, someautotetraploid rice had been selected and improved. T-test showed that seed setincreased obviously. The relationships among yield characters of autotetraploid ricewere analyzed. Seed set was strongly correlated with pollen fertility, total grainnumber per panicle and productive grain number per panicle; theoretical yield wasstrongly correlated with pollen fertility, productive panicle number per plant, totalgrain number per panicle, productive grain number, seed set and 1000-grain weight.Wx genotypes of 40 autotetraploid rice and 14 diploid rice were tested by usingthe (CT)n microsatellite marker and a cleaved amplified polymorphic sequence(CAPS) molecular marker named PCR-Acc Ι. Three microsatellite alleles wereproduced, i.e. Wx1, Wx2 and Wx3 both in autotetraploid and in diploid rice.Comparatively, PCR- Acc Ι molecular marker produced two genotypes, G-type andT-type for both autotetraploid and diploid rice. In this study, amylose content (AC), gel of consistency (GC) and gelatinization temperature (GT) of rice grain weremeasured and their relationships with Wx alleles were analyzed. The results showedthat variation of AC between autotetraploid and diploid rice was small when they hadthe same Wx genotype. However, variation of AC turned to be large when the Wxgenotypes were different. Actually, AC met the maximum value in Wx1 varieties andWx2 varieties the middle and Wx3 varieties the minimum. And AC was lower inautotetraploid than in diploid. Correlation analysis was done in this experiment. ACand GC of rice grain were probably controlled by Wx gene or other gene whoselocation was strictly linked to Wx gene, while GT of rice was not. The correlationcoefficient between Wx genotypes which revealed by (CT)n microsatellite marker andPCR-Acc Ι molecular marker was 0.842 with significant level. That revealed aconsistent result between the two types of markers. So it was possible to utilize boththe two types of markers to select and promote germplasm of autotetraploid rice.RAPD molecular markers were used to analyze the genetic diversity betweendiploid and autotetraploid rice. 178 repeatable bands were detected through 17 RAPDprimers with percentage of polymorphic bands was 81.5% in autotetraploid rice while173 repeatable bands were detected with percentage of polymorphic bands was 76.3%in diploid rice. According to the measurement of Shannon index, polymorphicinformation content and genetic distance, genetic diversity of autotetraploid was on ahigher level, genetic variation between autotetraploid and diploid rice was relativelyhigh. All these contributed to the genetic selection and improvement in rice breeding.As mentioned above, the results are not only helpful to promote the process ofrice improvement, but also to confirm the basic for further study of autotetraploid rice.

无介体双室微生物燃料电池产电性能初步研究

本文对无介体双室微生物燃料电池的产电性能进行了初步研究，并根据不同运行阶段产电性能的优劣，对其中微生物的差异性进行了比较分析。全文分为两个部分： 第一部分：以乙酸钠为阳极原料构建双室微生物燃料电池（MFC），研究不同阴极受体、外接电阻、乙酸钠浓度和pH等因素对电池产电性能的影响，研究结果表明：在500mL的阴阳极反应体系中，选用乙酸钠作为阳极底物，质量浓度为6.46 g/L， pH 7.0，接入500Ω外电阻，阴极电子受体选择高锰酸钾的情况下，微生物燃料电池产电性能最好，最大电功率密度达到294.72 mW/m2，库伦效率能达到25.87%。在确定最适外接电阻阻值的同时对MFC内阻进行测定，阻值为871.87Ω。 第二部分：微生物燃料电池运行中，比较以厌氧污泥作为接种源的第一阶段和只接入附着有大量微生物电极的第二阶段的产电性能，得出第二阶段产电性能优于第一阶段，最大电功率密度达到353.57mW/m2，比第一阶段提高58.85 mW/m2；库伦效率为39.35%，增幅达52％左右；针对微生物燃料电池运行过程中，底物CH3COONa可能存在其它的代谢途径，本实验进行了第二阶段产电性能与CH3COONa消耗率关系以及阳极液面上方气体成分和含量的研究，发现第二阶段50h前CH3COONa的大量消耗主要用于微生物的生长，在整个运行过程中，阳极液面上方含有CH4和CO2；对气体测定的同时还发现，振荡能增强电功率密度的输出；通过对电极上和污泥中微生物差异性分析得出，δ-变形菌纲、β-变形菌纲和拟杆菌门的菌种更适应微生物燃料电池的运行环境，能在电极上大量富集，提高电池的产电性能，只接入附着有大量微生物的电极能有效降低热袍菌纲的菌种数量，降低了CH3COONa的无为消耗，有效提高了电池的库伦效率。 Electricity production in the mediator-less two-chambered microbial fuel cell(MFC) was researched. Based on the result in the different operation phase in the MFC, the microbial diversity was analysed. The paper involved two parts: Part 1: A two-chambered microbial fuel cell (MFC) was constructed with high-concentration sodium acetate as fuel in the anode. The influence of different electron acceptors in the cathode, external resistance value, pH value and concentration of sodium acetate on electricity generation in MFC was investigated. The result showed that the maximum power density of 294.72 mW/m2 and the coulombic efficiency of 25.87% was achieved at sodium acetate concentration of 6.46 g/L, pH 7.0, external resistance 500Ωin the anode and when using potassium permanganate as electron acceptor in the cathode. While decided the value of resistor, we found that shaking has effect on electricity production in the MFC. Part 2: Comparing the electricity production in different operation phases when using anaerobic sludge as inoculum in the first phase and microbes in the anodic electrode as inoculum in the second phase, the result showed that electricity production in the second phase was more than that in the first phase, the maximum power density of 353.57 mW/m2 and the coulombic efficiency of 39.35% was achieved, 58.85 mW/m2 and 52％ more than that in the first phase, respectively. According to the fact that CH3COONa might be metabolized in other pathway in the running process in the MFC, we determining the relationship between electricity production and CH3COONa consumption, and the gas content in the anode, we found that CH3COONa was mainly used for microbe growth before 50h, and the anode contained CH4 and CO2. At the same time, we found that shaking could improve power density. The analysis on diversity of microbe in the anodic electrode and anaerobic sludge showed that δ-proteobacterium, β-proteobacterium and Bacteroidetes adapted themselves to the running environment of MFC. The anode could enrich them to improve the electricity production while reduced the quantity of Thermotogales, which were obligately anaerobic organotrophs with a fermentative metabolism, to increase the coulombic efficiency effectively.

Polyamide thin film composite membranes prepared from isomeric biphenyl tetraacyl chloride and m-phenylenediamine

Three novel of isomeric tetra-functional biphenyl acid chloride: 3,3',5,5'-biphenyl tetraacyl chloride (mm-BTEC), 2,2',4,4'-biphenyl tetraacyl chloride (om-BTEC), and 2,2',5,5'-biphenyl tetraacyl chloride (op-BTEC) were synthesized, and used as new monomers for the preparation of the thin film composite (TFC) reverse osmosis (RO) membranes through interfacial polymerization with m-phenylenediamine (MPDA). The results of membrane performance test showed that membranes prepared from om-BTEC and op-BTEC had higher flux at the expanse of rejection compared with membranes prepared from mm-BTEC.

Pore-filling membrane for direct methanol fuel cells based on sulfonated poly(styrene-ran-ethylene) and porous polyimide matrix

We have synthesized a porous co-polyimide film by coagulating a polyimide precursor in the non-solvent and thermal imidization. Factors affecting the morphology, pore size, porosity, and mechanical strength of the film were discussed. The porous polyimide matrix consists of a porous top layer and a spongy sub-structure with micropores. It is used as a porous matrix to construct sulfonated poly(styrene-ran-ethylene) (SPSE) infiltrated composite membrane for direct methanol fuel cell (DMFC) application. Due to the complete inertness to methanol and the very high mechanical strength of the polyimide matrix, the swelling of the composite membrane is greatly suppressed and the methanol crossover is also significantly reduced, while high proton conductivity is still maintained. Because of its higher proton conductivity and less methanol permeability, single fuel cell performance test demonstrated that this composite membrane outperformed Nafion membrane.

A biofuel cell harvesting energy from glucose-air and fruit juice-air

The membraneless biofuel cell (BFC) is facile prepared based on glucose oxidase and laccase as anodic and cathodic catalyst, respectively, by using 1,1'-dicarboxyferrocene as the mediators of both anode and cathode. The BFC can work by taking glucose as fuel in air-saturated solution, in which air serves as the oxidizer of the cathode. More interestingly, the fruit juice containing glucose, e.g. grape, banana or orange juice as the fuels substituting for glucose can make the BFC work. The BFC shows several advantages which have not been reported to our knowledge: (1) it is membraneless BFC which can work with same mediator on both anode and cathode; (2) fruit juice can act as fuels of BFCs substituting for usually used glucose; (3) especially, the orange juice can greatly enhance the power output rather than that of glucose, grape or banana juice. Besides, the facile and simple preparation procedure and easy accessibility of fruit juice as well as air being whenever and everywhere imply that our system has promising potential for the development and practical application of BFCs.

新型托辊在线检测机床控制系统设计

本文介绍了一种新型托辊自动化装配线上的在线检测机床控制系统,对系统的硬件组态及控制功能作了主要描述。该机床的主要功能是对装配完成的托辊进行性能测试,并采集其性能参数,根据采集并处理后的数据来判定检测的产品是否合格。整个机床控制系统主要由SIMOTION运动控制系统、人机操作触摸屏、远程输入输出模块ET200M、数据采集传感器、到位检测开关、电源及控制回路等组成。

automated test case generation for the stress testing of multimedia systems

With the advancement in network bandwidth and computing power, multimedia systems have become a popular means for information delivery. However, general principles of system testing cannot be directly applied to testing of multimedia systems on account of their stringent temporal and synchronization requirements. In particular, few studies have been made on the stress testing of multimedia systems with respect to their temporal requirements under resource saturation. Stress testing is important because erroneous behavior is most likely to occur under resource saturation. This paper presents an automatable method of test case generation for the stress testing of multimedia systems. It adapts constraint solving techniques to generate test cases that lead to potential resource saturation in a multimedia system. Coverage of the test cases is defined upon the reachability graph of a multimedia system. The proposed stress testing technique is supported by tools and has been successfully applied to a real-life commercial multimedia system. Although our technique focuses on the stress testing of multimedia systems, the underlying issues and concepts are applicable to other types of real-time systems.

Advanced superconducting electron cyclotron resonance ion source SECRAL: Design, construction, and the first test result

Superconducting electron cyclotron resonance (ECR) ion source with advanced design in Lanzhou (SECRAL) is a next generation ECR ion source and aims for developing a very compact superconducting ECR ion source with a structure and high performances for highly charged ion-beam production. The ion source was designed to be operated at 18 GHz at initial operation and finally will be extended to 28 GHz. The superconducting magnet confinement configuration of the ion source consists of three axial solenoid coils and six sextupole coils with a cold iron structure as field booster and clamping. At full excitation, this magnet assembly can produce peak mirror fields on the axis of 3.6 T at injection, 2.2 T at extraction, and a radial sextupole field of 2.0 T at plasma chamber wall. What is different from the traditional design, such as LBNL VENUS and LNS SERSE, is that the three axial solenoid coils are located inside of the sextupole bore in order to reduce the interaction forces between the sextupole coils and the solenoid coils. SECRAL may open the way for building a compact and high-performance 18-28 GHz superconducting ECR ion source. Very preliminary commissioning results are promising. Detailed design, construction issues and very preliminary test results of the ion source at 18 GHz are presented.

automated test program generation for an industrial optimizing compiler

Association for Computing Machinery, ACM; IEEE; IEEE Computer Society; SIGSOFT