Identification of major histocompatibility complex class I alleles in Chinese rhesus macaques

Major histocompatibility complex (MHC) class I information is vital for understanding variance of immune responses in HIV vaccination and biomedical models. In this study, 9 Mamu-A and 13 Mamu-B alleles were identified from the cDNA products of 10 Chinese

Complex mutation at a microsatellite locus in sturgeons: Acipenser sinensis, A-schrenckii, A-gueldenstaedtii and A-baerii

Cross-species amplifications of microsatellite locus Spl-106, which was originally screened from the genome of shovelnose sturgeon (Scaphirhynchus platorynchus) with a perfect TAGA repeat motif, were carried out in four other species of the genera Acipenser. A total of 34 polymerase chain reaction (PCR) products representing 16 different alleles of this locus was sequenced. Sequence analysis results showed that besides the number changes of repeat units, many mutational events, such as single-base substitutions and various insertion/deletion (indels) occurred not only at species level but also at individual level, even among the different alleles within the same individual. The repeat motifs varied from perfect (TAGA)n array to perfect compound (TAAA)m (GAAA)n and perfect or imperfect compound (TAAA)m (TAGA)n (TAAA)x arrays in different species and different individuals. The evolution dynamics of this locus in sturgeons was inferred in that it may evolve from a single perfect to different perfect or imperfect compounds.

Characterization of complex hydrocarbons in cigarette smoke condensate by gas chromatography-mass spectrometry and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

Gas chromatography-mass spectrometry with electron ionization and positive-ion chemical ionization and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF-MS) were applied for the characterization of the chemical composition of complex hydrocarbons in the non-polar neutral fraction of cigarette smoke condensates. Automated data processing by TOF-MS software combined with structured chromatograms and manual review of library hits were used to assign the components from GC x GC-TOF-MS analysis. The distributions of aliphatic hydrocarbons and aromatics were also investigated. Over 100 isoprenoid hydrocarbons were detected, including carotene degradation products, phytadiene isomers and carbocyclic diterpenoids. A total of 1800 hydrocarbons were tentatively identified, including aliphatic hydrocarbons, aromatics, and isoprenoid hydrocarbons. The identified hydrocarbons by GC x GC-TOF-MS were far more than those by GC-MS. (C) 2004 Elsevier B.V. All rights reserved.

Photo-induced reactions in the ion-molecule complex Mg+-OCNC2H5

Ion - molecule complexes of magnesium cation with ethyl isocyanate were produced in a laser- ablation supersonic expansion nozzle source. Photo- induced reactions in the 1: 1 complexes have been studied in the spectral range of 230 - 410 nm. Photodissociation mass spectrometry revealed the persistent product Mg+ from nonreactive quenching throughout the entire wavelength range. As for the reactive channels, the photoproducts, Mg+OCN and C2H5+, were produced only in the blue absorption band of the complex with low yields. The action spectrum of Mg+(OCNC2H5) consists of two pronounced peaks on the red and blue sides of the Mg+ 3(2)P <-- 3(2)S atomic transition. The ground state geometry of Mg+ - OCNC2H5 was fully optimized at B3LYP/6- 31 - G** level by using GAUSSIAN 98 package. The calculated absorption spectrum of the complex using the optimized structure of its ground state agrees well with the observed action spectrum. Photofragment branching fractions of the products are almost independent of the photolysis photon energy for the 3P(x,y,z) excitations. The very low branching ratio of reactive products to nonreactive fragment suggests that evaporation is the main relaxation pathway in the photo- induced reactions of Mg+ (OCNC2H5). (C) 2003 American Institute of Physics.

Soluble neodymium chloride 2-ethylhexanol complex as a highly active catalyst for controlled isoprene polymerization

Soluble NdCl3 center dot 3EHOH (2-ethyl hexanol) in hexane combined with AlEt3 is highly active for isoprene polymerization in hexane. The NdCl3 center dot 3EHOH/AlEt3 has higher activity than the typical binary catalyst NdCl3 center dot 3(i)PrOH (isopropanol)/AlEt3 and ternary catalyst NdV3 (neodymium versatate)/AlEt2Cl/Al(i-Bu)(2)H. The molecular weight of polyisoprenes can be controlled by variation of [Nd], [Al]/[Nd] ratio and polymerization temperature and time. The NdCl3 center dot 3EHOH/AlEt3 catalyst polymerized isoprene to afford products featuring high cis-1,4 stereospecificity (ca. 96%), high molecular weight (ca. 10(5)) and relatively narr ow molecular weight distributions (M-w/M-n = 2.0-2.8) simultaneously. More importantly, some living polymerization characteristics were demonstrated: (a) absence of chain termination; (b) linear correlation between M-n and polymer yield; (c) increment of molecular weight in the 'seeding' polymerization. Though some deviation from the typical living polymerization such as molecular weight distribution is not narrow enough and the line of M-n and polymer yield does not extrapolate to zero, controlled polymerization with the current catalyst can still be concluded.

Preparation and luminescence properties of ormosil hybrid materials doped with Tb(Tfacac)(3)phen complex via a sol-gel process

In this paper, silica-based transparent organic-inorganic hybrid materials were prepared via the sol-gel process. Tetraethoxysilane (TEOS) and 3-glycidoxypropyltrimethoxysilane (GPTMS) were used as the inorganic and organic precursors, respectively. The terbium complex, Tb(Tfacac)(3)phen (Tfacac = 1,1,1-trifluoroacetylacetone, phen = 1, 10-phenanthroline) was successfully doped into organically modified silicate (ormosil) matrix derived from TEOS and GPTMS, and the luminescent properties of the resultant ormosil composite phosphors [ormosil/Th(Tfacac)(3)phen] were investigated compared with those of the Tb(Tfacac)(3)phen incorporated into SiO2 derived from TEOS (labeled as silica/Tb(Tfacac)(3)phen). Both kinds of the materials show the characteristic green emission of Tb3+ ion. The luminescence behavior of the resultant composite products was dependent on the matrix composition. The optimized lanthanide complex concentration in the ormosil/Tb(Tfacac)(3)phen was increased compared with in silica/Tb(Tfacac)(3)phen. Furthermore, the lifetime of Tb3+ in Tb(Tfacac)(3)phen, silica/Tb(Tfacac)(3)phen and ormosil/Tb(Tfacac)(3)phen follows the sequence: onmosil/Tb(Tfacac)(3)phen>silica/Tb(Tfacac)(3)phen>pure Tb(Tfacac)(3)phen.

Synthesis of the complex fluoride LiBaF3 and optical spectroscopy properties of LiBaF3 : M(M = Eu,Ce) through a solvothermal process

The complex fluoride LiBaF3 and LiBaF3:M(M = Eu, Ce) is solvothermally synthesized at 180 degreesC and characterized by means of X-ray powder diffraction, scanning electron microscopy, thermogravimetric analysis and infrared spectroscopy. In the solvothermal process, the solvents, molar ratios of initial mixtures and reaction temperature play important roles in the formation of products. The excitation and emission spectra of the LiBaF3:M(M= Eu,Ce) have been measured by fluorescence spectrophotometer. In the LiBaF3: Eu emission spectra, there is one sharp line emission located at 360 nm arising from f --> f transition of Eu2+ in the host lattice, and typical doublet 5d-4f emission of Ce3+ in LiBaF3 powder is shown.

Hydrothermal and solvothermal synthesis of the complex fluoride alpha '-SrAlF5

The complex fluoride alpha'-SrAlF5 has been synthesized through hydrothermal and solvothermal methods under mild conditions. The effects of the molar ratio of starting materials, temperature, reaction time and solvents on the synthesis of alpha'-SrAlF5 were discussed. The final products were characterized by XRD and SEM. The rod-like shape of alpha'-SrAlF5 is shown in SEM images.

The mild hydrothermal synthesis of complex fluorides of AZnF(3) (A = Na, K)

The complex fluorides of AZnF(3) (A = Na, K), which are isostructural with perovskite phases were obtained by the method of hydrothermal synthesis at 160-220 degrees C. Compared with traditional high-temperature solid-state method, the products were pure and contained lower amount of oxygen.

Cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex

Function of chloride and effect of various alkylaluminiums, C1/A1 molar ratio, solvents on cyclization in situ of isoprene polymerization catalyzed by Nd-Al bimetallic complex were studied. The structure of cyclized products was characterized by means of IR and H-1 NMR, The results indicated that in the course of isoprene polymerization with rare earth catalytic system, the function of alkylchloride introduced is terminating cis-polymerization and generating cationic species with alkyl-aluminums to initiate cyclization in situ. Soluble cyclized polyisoprene was obtained with fragments of cyclopolyisoprene.

The oxidative demethylation of 24-membered hexa-aza macrocyclic bicopper(I) complex - The mimicking for monooxygenase

By [2 + 2] Schiff base condensation of 5 - bromo - 2 - methoxylbenzene - 1,3 - dicarboxaldehyde with diethylenetriamine, a new hexaaza 24 - membered macrocyclic ligand was obtained,which formed a macrocyclic binuclear copper(I) complex in the presence of [Cu . (CH3CN)(4)]ClO4. When the copper(I) complex was oxidized in air or oxygen, a new macrocyclic binuclear copper( II) complex was obtained. The copper( II.) complex was characterized by several methods and its oxidized products was characterized by H-1 NMR. The results show that during oxidation, a methoxyl group in the ligand ring broke; and the phenoxy - and water - bridged Cu(II) complex formed. In oxidation of monooxygenase such as ligninase, oxidative demethylation also happened. Therefore this work mimicked this process for the first time by using macrocyclic complex. The quantity of absorbed oxygen and the absorption rate of oxygen were determined.

RESEARCH ON THE THERMAL-DECOMPOSITION OF THE BIOINORGANIC COMPLEX OF EUROPIUM AND L-GLUTAMINE BY MOSSBAUER-SPECTROSCOPY

Mossbauer spectroscopy has been used to investigate the thermal decomposition of the bioinorganic complex of europium and L-glutamine. The Mossbauer parameters can demonstrate that the water molecules in the complex and the chlorine anion in the hydrogen chloride molecule, dissociated from the complex below 200-degrees-C, are not linked directly to the europium atom. The thermal decomposition process of the complex is discussed and a possible coordination model for the europium L-glutamine complex is also proposed on the basis of the thermogravimetric and derivative thermogravimetric curves, and from some evidence obtained from the Mossbauer effects of some decomposition products of the complex.

Preparation of chitooligosaccharides from chitosan by a complex enzyme

Chitosan of 24% degree of acetylation was depolymerized by a mixture of cellulase, alpha amylase, and proteinase to give the title oligosaccharides. The removal of products by membrane separation permitted yield maximization of products having degree of polymerization in the 3-10 range. (C) 1999 Elsevier Science Ltd. All rights reserved.