Assessment of Microscale Test Methods of Peeling and Splitting along Surface of Thin-Film/Substrates

Peel test methods are assessed through being applied to a peeling analysis of the ductile film/ceramic substrate system. Through computing the fracture work of the system using the either beam bend model (BB model) or the general plane analysis model (GPA model), surprisingly, a big difference between both model results is found. Although the BB model can capture the plastic dissipation phenomenon for the ductile film case as the GPA model can, it is much sensitive to the choice of the peeling criterion parameters, and it overestimates the plastic bending effect unable to capture crack tip constraint plasticity. In view of the difficulty of measuring interfacial toughness using peel test method when film is the ductile material, a new test method, split test, is recommended and analyzed using the GPA model. The prediction is applied to a wedge-loaded experiment for Al-alloy double-cantilever beam in literature.

Vectorial solution of Kukhtarev equations for doubly doped crystals and optimal choice of recording directions in nonvolatile holographic storage

Vectorial Kukhtarev equations modified for the nonvolatile holographic recording in doubly doped crystals are analyzed, in which the bulk photovoltaic effect and the external electrical field are both considered. On the basis of small modulation approximation, both the analytic solution to the space-charge field with time in the recording phase and in the readout phase are deduced. The analytic solutions can be easily simplified to adapt the one-center model, and they have the same analytic expressions given those when the grating vector is along the optical axis. Based on the vectorial analyses of the band transport model an optimal recording direction is given to maximize the refractive index change in doubly doped LiNbO3:Fe: Mn crystals. (c) 2007 Optical Society of America.

An Overview of Literature on Primates in China

把1870-2001年来自美国"现代灵长类文献题录数据库"、"维普中文数据库"及"中国灵长类研究文献题录"的资料按4个时期(I:1870-1949;Ⅱ:1950-1965;Ⅲ:1966-1977;Ⅳ:1978-2001)分类整理.此外,使用了"科学引文数据库(扩展版)".结果如下:(1)1870-2001年共有20 52篇文献,2个文献数量高峰分别出现于1950-1965和1978-2001年;科研部门所发表的论文占54.2%,并随时间而增加;而国外部门则随之减少.(2)2 052篇文献中,超过9%的文献为SCI所收录,其中1966-1977年被SCI收录的文献百分比最高;在全部被SCI收录的文献中又以科研部门的占优势(59.1%);但国外部门则以其30.1%的文献被SCI收录而领先.(3)统计了灵长类研究9个领域文献百分比及其变化,其中1978-2001间生态学和行为、神经生物学、繁殖和饲养快速发展;化石灵长类、形态学和解剖学减少;分类及分布、细胞及分子进化显得不甚突出;在第Ⅱ时期和第Ⅳ时期疾病防治研究相当多;保护生物学得到越来越多的关注.第Ⅳ时期作者数量最多,但每个作者的文献平均数却不如第Ⅰ时期.一般地说,在SCI收录的作者中以中国作者居多,但在第I时期唯一被SCI收录的作者则是一名外国学者;在第Ⅲ时期外国作者占被收录作者数的60%.

Heavy metals in plants and phytoremediation - A state-of-the-art report with special reference to literature published in Chinese journals

Goal, Scope and Background. In some cases, soil, water and food are heavily polluted by heavy metals in China. To use plants to remediate heavy metal pollution would be an effective technique in pollution control. The accumulation of heavy metals in plants and the role of plants in removing pollutants should be understood in order to implement phytoremediation, which makes use of plants to extract, transfer and stabilize heavy metals from soil and water. Methods. The information has been compiled from Chinese publications stemming mostly from the last decade, to show the research results on heavy metals in plants and the role of plants in controlling heavy metal pollution, and to provide a general outlook of phytoremediation in China. Related references from scientific journals and university journals are searched and summarized in sections concerning the accumulation of heavy metals in plants, plants for heavy metal purification and phytoremediation techniques. Results and Discussion. Plants can take up heavy metals by their roots, or even via their stems and leaves, and accumulate them in their organs. Plants take up elements selectively. Accumulation and distribution of heavy metals in the plant depends on the plant species, element species, chemical and bioavailiability, redox, pH, cation exchange capacity, dissolved oxygen, temperature and secretion of roots. Plants are employed in the decontamination of heavy metals from polluted water and have demonstrated high performances in treating mineral tailing water and industrial effluents. The purification capacity of heavy metals by plants are affected by several factors, such as the concentration of the heavy metals, species of elements, plant species, exposure duration, temperature and pH. Conclusions. Phytoremediation, which makes use of vegetation to remove, detoxify, or stabilize persistent pollutants, is a green and environmentally-friendly tool for cleaning polluted soil and water. The advantage of high biomass productive and easy disposal makes plants most useful to remediate heavy metals on site. Recommendations and Outlook. Based on knowledge of the heavy metal accumulation in plants, it is possible to select those species of crops and pasturage herbs, which accumulate fewer heavy metals, for food cultivation and fodder for animals; and to select those hyperaccumulation species for extracting heavy metals from soil and water. Studies on the mechanisms and application of hyperaccumulation are necessary in China for developing phytoremediation.

Choice of calibration equations in calibrating microwave test fixtures

The error theory of linear equation system has been applied to the calibration procedure of microwave network analyser in this article. A new explanation for the choice of the linear calibration equations is proposed and a general principle for choosing calibration equations is presented. The method can also be used to predict the occurrence of the problem of frequency limitation at some periodic frequencies. This principle is employed to the thru-short-delay (TSD) method and the solution using the chosen equations gives the most accurate results. A good agreement between the theory and the experiment has been obtained.

Choice of calibration equations of the TSM method

For the reciprocal-test fixtures, there are six independent S-parameters to. be determined, and the thru-short-match (TSM) calibration can provide eight calibration equations. In this paper, the relation of calibration equations is investigated. It has been shown that the four equations obtained from the measurement with a transmission standard can be used simultaneously in the calibration. Experimental results show that the different choice of equations will lead to quite different solution, and the calibration accuracy can be improved by taking advantages of the established relation among the calibration equations and properly choosing calibration equations.

Cubic sinusoidal phase mask: Another choice to extend the depth of field of incoherent imaging system

Wave-front coding is a well known technique used to extend the depth of field of incoherent imaging system. The core of this technique lies in the design of suitable phase masks, among which the most important one is the cubic phase mask suggested by Dowski and Cathey (1995) [1]. In this paper, we propose a new type called cubic sinusoidal phase mask which is generated by combing the cubic one and another component having the sinusoidal form. Numerical evaluations and real experimental results demonstrate that the composite phase mask is superior to the original cubic phase mask with parameters optimized and provides another choice to achieve the goal of depth extension. (C) 2009 Elsevier Ltd. All rights reserved.

工作群体有效性评价及群体工作设计

This thesis study the problem of work group effectiveness and group job design according to extensive literature investigation and the analysis of realistic background. The whole research consists of four parts: (1) The evaluation of work group effectiveness, the aim is to search to criteria that can describe and analysis work group, and explore the cognitive dimensions of effectiveness of Chinese subjects; (2) The study on the relationship between group job characteristic and effectiveness, the aim is to find the general correlation between work group characteristic and effectiveness, and try to search the most important core variable; (3) The study on the preference for the way of group work; (4) The study of the relationship between group composition and group effectiveness, try to examine how different approaches of personnel selection influence work results. The results indicate: (1) The evaluation of group effectiveness mainly consists of two dimensions: performance and the employee's attitude and feelings toward the group, so we can use these two dimensions and corresponding criteria as the standard of effectiveness evaluation. (2) According to the analysis of related literature, we can determine work group characteristic from five aspects: job design, the interdependence among members, group composition, organizational background, group process. (3) Experimental study find that different group job characteristics have different relationship models with effectiveness criteria. Job design, the interdependence among group members, group composition have significant correlation relationships with two kinds of effectiveness criteria; organizational background mainly has relationships with satisfaction criteria; group process mainly has relationships with performance criteria. (4) The choice for people to select the way of group work has the consistency, that is people prefer to "Self--managed work groups"; but different groups have the difference, the main group dimension is the difference between group members and group leaders. (5) Work groups which were composed accordingly to interpersonal attraction have higher levels of communication, coordination, group cohesion and job satisfaction than ability--based groups based. But the performance evaluation under these two conditions has no difference. The thesis analysis and discuss the research results, also point out several questions that needed to be explored further and the possible research directions in the future. This study has some reference value in group--level performance appraisal and reward design, the content and method of group--level job design, and personnel selection of group, etc.