微碳深冲钢板的非｛111｝织构特征及其对r,△r���的影响

From St15 micro-carbon deep drawing steel sheets, two sets of samples with (r) over bar variant and Deltar constant, and (r) over bar constant and Deltar variant, were selected to carry out texture measurement and ODF analysis. A description of the texture characteristics and an investigation on the effect of the main textures on the (r) over bar and Deltar values were given. The results show that in the tested steel sheets no desired gamma < 111 > parallel to ND orientation line appears but gamma' orientation line located at <()over bar>=0-90 degrees, theta =19 degrees and phi =45 degrees, and L orientation line located around gamma < 111 > parallel to ND orientation line which spirally rotates from Psi =0 degrees, theta =54.7 degrees and phi =62.7 degrees to Psi =90 degrees, theta =40 degrees and phi =45 degrees occur. Among them, the L orientation line has a main influence on the (r) over bar value and the stronger the texture density, the higher the (r) over bar value is, but is somewhat detrimental to the Deltar value; at the same time, the gamma' orientation line has a major effect on the Deltar value in an opposite way, but is somewhat deteriorative to the (r) over bar value. A strong L orientation line superposed by a relatively strong gamma' orientation line may produce fine (r) over bar and Deltar values.

Numerical Simulation of R-M Instability

In order to capture shock waves and contact discontinuities in the field and easy to program with parallel computation a new algorithm is developed to solve the N-S equations for simulation of R-M instability problems. The method with group velocity control is used to suppress numerical oscillations, and an adaptive non-uniform mesh is used to get fine resolution. Numerical results for cylindrical shock-cylindrical interface interaction with a shock Mach number Ms=1.2 and Atwood number A=0.818, 0.961, 0.980 (the interior density of the interface/outer density p(1)/p(2) = 10, 50, 100, respectively), and for the planar shock-spherical interface interaction with Ms=1.2 and p(1)/p(2) = 14.28are presented. The effect of Atwood number and multi-mode initial perturbation on the R-M instability are studied. Multi-collisions of the reflected shock with the interface is a main reason of nonlinear development of the interface instability and formation of the spike-bubble structures In simulation with double mode perturbation vortex merging and second instability are found. After second instability the small vortex structures near the interface produced. It is important factor for turbulent mixing.

Synthesis of nickel(II) complexes of alpha-isoxazolylazo-beta-diketones and their absorption of spin-coating films and thermal properties for HD-DVD-R

Three kinds of new nickel(II) complexes of alpha-isoxazolylazo-beta-diketones with blue-violet light absorption were synthesized. Their structures were postulated based on elemental analysis, MS and FT-IR spectra. Smooth films on K9 glass substrates were prepared using the spin-coating method. The absorption properties and thermal stability of these complexes were discussed. The static optical recording test for high density digital versatile disc-recordable (HD-DVD-R) system was also studied. (c) 2005 Elsevier B.V. All rights reserved.

r���白宝石单晶的温梯法生长及缺陷研究

本文描述使用温梯法（TGT）生长（1-↑102）方向的白宝石单晶，应用X射线双晶摇摆曲线（XRC）测定了晶体内部的完整性，再利用KOH熔体腐蚀出样品的r���（1-↑102）上的位错蚀坑，借助扫描电子显微镜（SEM）进行观察，发现r���白宝石的位错腐蚀坑呈等腰三角形，并且有台阶状结构，并分析了位错的成因。

导模法和温度梯度法生长r���蓝宝石(英文)

r���(0112)蓝宝石晶体可用作制备非极性GaN薄膜的衬底。采用温度梯度法(temperature gradient technique,TGT)和导模法(edge-defined film-fed crystal growth,EFG)生长了质量良好的r���蓝宝石晶体。利用双晶衍射、光学显微镜、光谱仪观察和分析了晶体的结构和缺陷。结果表明:TGT法生长的r���宝石晶体的双晶摇摆曲线对称性好,半高宽值仅为18 rad.s,位错密度为4×103 cm-2,透过率达83%,晶体质量好。与TGT法相比,EFG法生长的r���蓝宝石晶体的结构完整性较差,位错密度为5×105 cm-2,透过率仅为75%。但是EFG法具有晶体生长速度快,后期加工成本低的优点。

丁香属（Syringa L.）的分类学修订

丁香属隶属于木犀科，分布于东南欧和东亚至喜马拉雅地区，我国是丁香属的现代分布中心。《中国植物志》（61卷，1992）记录了我国野生丁香种类16种;《Flora of China》（15卷，1996）记录了中国原产丁香种类16种，并认为全世界大约有20种。丁香属属下分类等级划分分歧较大，很多种的划分也存在争议。花叶丁香、四川丁香等种类是根据栽培植物描述的，没有指定模式标本，给分类处理带来了一定困难。另外，丁香属很多分类群的性状变异非常复杂，仅根据有限的标本很难做出合理的分类处理。本研究通过广泛查阅文献和标本，同时进行野外居群取样和性状观察，对各类群的性状在居群内和居群间的变异进行统计学分析，判断其分类价值，并运用多变量分析的方法，为各类群的合理划分提供依据。结合性状分析和地理分布等证据，做出分类处理。 作者查阅了国内外16个标本馆的近2000份标本，其中模式标本约70份。对我国12个省市的40余个居群进行了取样和观察，采集标本500余份，涉及了《中国植物志》61卷收录的除了藏南丁香以外的所有类群。通过对9个复合体的40余个性状在居群内和居群间的变异进行统计分析，发现叶片类型、叶柄长度、花序着生类型、花冠大小、花丝长度、花药颜色在不同类群间差异明显，可以用作划分种的依据;叶片形状、叶片毛被、花序轴毛被、花冠管形状等性状在有些复合体内的居群间呈现连续的变异，只能用作种下等级（亚种）的划分;叶片大小、花序轴形状、花药着生在花冠的位置、蒴果是否被皮孔等性状在不同复合体的居群间呈现间断或连续的变异，视不同情况可以用作种间或种下等级的划分依据，或作种内变异处理;而叶脉、花色、花萼齿裂、花冠裂片形状等性状在居群间差异不大，不适合用作分类依据。 在性状分析和多变量分析的基础上，本文将丁香属划分为2组2系12种13亚种，其中短花冠管组有1种3亚种;长花冠管组的顶生花序系有5种5亚种，侧生花序系有6种5亚种，并指定了各组和系的模式种;编制了属下各组、系、种和亚种划分的检索表，对12种13亚种进行了形态描述、标本引证，给出了地理分布图和生境，并提出了分类处理依据。文中对巧玲花、皱叶丁香、红丁香和云南丁香等复合体内的一些分类群进行了归并，做出4个新组合：S. pubescens ‘Meyer���、S. villosa subsp. wolfii、S. yunnanensis subsp. sweginzowii和S. yunnanensis subsp. tomentella，处理了11个新异名（S. fauriei H. Lév.、S. julianae C. K. Schneid.、S. meyeri var. spontanea M. C. Chang、S. pinetorum W. W. Sm.、S. wardii W. W. Sm.、S. oblata var. donaldii R. B. Clark et J. L. Fiala、S. afghanica C. K. Schneid.、S. protolaciniata P. S. Green et M. C. Chang、S. tibetica P. Y. Bai、S. reflexa C. K. Schneid. 、S. wilsonii C. K. Schneid.）。作者指定了3种4亚种(S. reticulata subsp. reticulata、 S. reticulata subsp. amurensis、S. pubescens subsp. microphylla、S. oblata subsp. dilatata的后选模式，并对其它10个名称指定了后选模式。文中还提出了分类处理原则，对我国丁 香属的分布及各地方植物志的记载进行了评述，并对丁香属的分布格局提出了作者的看法。 作者还对13个分类群的16号材料进行了染色体观察，发现除了毛丁香有染色体2n=48外，其它均为2n=46，其中朝阳丁香的染色体数目为首次报道。对小叶巧玲花不同异名（包括小叶蓝丁香、小叶巧玲花与小叶蓝丁香的杂交种）的材料进行染色体观察时，发现它们之间差异很小，进一步佐证了作者将其合并的合理性。另外野生的花叶丁香（华丁香）与栽培的花叶丁香在染色体数目上也无差异，支持了作者认为二者为同物异名的观点。

B itte r an d Sw e e t /Um am i Ta s te Re c ep to rs w ith D iffe ren tly Evo lu tio n a ry Pa thw ays

通过生物信息学和系统发育学分析,研究了苦味受体和甜味/鲜味受体的进化途径。结果显示,苦味受体 和甜味/鲜味受体在进化上具有远相关,并且具有不同的进化途径,提示这可能是导致这些受体具有不同功能,传 导不同味觉的原因。