51 resultados para Bayesian Mixture Model, Cavalieri Method, Trapezoidal Rule

em Chinese Academy of Sciences Institutional Repositories Grid Portal


Relevância:

100.00% 100.00%

Publicador:

Resumo:

A new high-order finite volume method based on local reconstruction is presented in this paper. The method, so-called the multi-moment constrained finite volume (MCV) method, uses the point values defined within single cell at equally spaced points as the model variables (or unknowns). The time evolution equations used to update the unknowns are derived from a set of constraint conditions imposed on multi kinds of moments, i.e. the cell-averaged value and the point-wise value of the state variable and its derivatives. The finite volume constraint on the cell-average guarantees the numerical conservativeness of the method. Most constraint conditions are imposed on the cell boundaries, where the numerical flux and its derivatives are solved as general Riemann problems. A multi-moment constrained Lagrange interpolation reconstruction for the demanded order of accuracy is constructed over single cell and converts the evolution equations of the moments to those of the unknowns. The presented method provides a general framework to construct efficient schemes of high orders. The basic formulations for hyperbolic conservation laws in 1- and 2D structured grids are detailed with the numerical results of widely used benchmark tests. (C) 2009 Elsevier Inc. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Cetacean respiration usually happen in bouts. The most widely applied quantitative method used to analyze the structure of these bouts is the log(e)-survivorship analysis, based on the assumption that the respiratory intervals are distributed as negative exponentials. However, for the data collected from three captive Yangtze finless porpoises (Neophocaena phocaenoides asiaeorientalis), we failed to obtain a convergent result with the application of log,survivorship analysis. However, the two-Gaussian model, which was recently proposed to analyze the feeding behavior of cows, was successfully fitted to the data. According to the fitting results, the overall respiratory pattern of the captive Yangtze finless porpoises can be described as a dive with a mean duration of around 30-40 s, followed by two or three ventilations with a mean interval of approximately 9 s. The average intra-bout intervals during both active and inactive periods are constant at 7.7-9.9 s for all individuals. However, when shifting from active to inactive states, the adult male and female decrease their mean numbers of respirations per bout and average length of inter-bout respiratory intervals, while the estimates of both parameters increase for the juvenile female. It was pointed out that the two-Gaussian model might be more adequate for cetacean respiratory-bout structure analyses than the log(e)-survivorship technique.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

TRISO-Model(tridimensional integrated software development model)是为处理软件开发的复杂性和动态性而提出的三维集成软件开发方法学,其中,多维模型之间的语义一致性维护以及对模型应用中公共操作部分的重用,提出了基于一致语义进行模型管理的需求.给出了基于MDA(model driven architecture)进行模型管理的方法MDA-MMMethod(MDA based model management method),应用MDA的4层模型管理结构,基于MDA核心标准MOF(meta object facility)所提供的公共语义基础管理模型和元模型,MDA-MMMethod支持各种MDA模型操作标准实现在TRSIO-model应用中的重用.开发了相应的支持系统MDA-MMSystem(MDA based model management system),应用于SoftPM的项目实践中.与传统方法相比,模型应用的开发效率得到了显著提高,同时降低了开发成本.最后,给出了模型融合的应用实例介绍.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Neighbor embedding algorithm has been widely used in example-based super-resolution reconstruction from a single frame, which makes the assumption that neighbor patches embedded are contained in a single manifold. However, it is not always true for complicated texture structure. In this paper, we believe that textures may be contained in multiple manifolds, corresponding to classes. Under this assumption, we present a novel example-based image super-resolution reconstruction algorithm with clustering and supervised neighbor embedding (CSNE). First, a class predictor for low-resolution (LR) patches is learnt by an unsupervised Gaussian mixture model. Then by utilizing class label information of each patch, a supervised neighbor embedding is used to estimate high-resolution (HR) patches corresponding to LR patches. The experimental results show that the proposed method can achieve a better recovery of LR comparing with other simple schemes using neighbor embedding.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Based on the theory of the pumping well test, the transient injection well test was suggested in this paper. The design method and the scope of application are discussed in detail. The mathematical models are developed for the short-time and long-time transient injection test respectively. A double logarithm type curve matching method was introduced for analyzing the field transient injection test data. A set of methods for the transient injection test design, experiment performance and data analysis were established. Some field tests were analyzed, and the results show that the test model and method are suitable for the transient injection test and can be used to deal with the real engineering problems.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

基于预测模型的遥操作是消减通信大时延的有效方法,预测精度直接影响操作品质.分析了遥操作中的不确定大时延及有限带宽对模型修正的影响,针对模型参数的不确定性,提出了一种新的模型在线修正方法.该方法采用时标标识、同态模型、数据平滑等策略,有效克服了实测信息错配、反馈修正与实时预测过程异步以及变采样步长问题,实现了模型的精确在线修正,提高了预测精度和系统的鲁棒性.通过仿真实验验证了该方法的有效性.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

提出一种基于变形修正的动力模型简化方法,以复杂工程结构的有限元模型为基础,根据运动同步性假设将结构分成若干同步性区域,采用适当的位移模式去逼近位移真值,再通过总体应变能最小来优化,从而得到整体位移与局部位移模式间的转换关系,算例结果表明了简化方法的有效性.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

提出一种基于柔度修正的局部刚体化结构动力模型简化方法.以复杂工程结构的有限元模型为基础,根据运动同步性假设将结构分成若干同步性区域,对每个区域引入准刚体模态,实现对结构的简化.同时对简化方法进行误差分析,利用柔度修正的思路实现对简化变化矩阵的修正,得到更精确的简化结果.以海洋平台结构作为算例应用该方法,得到了比较满意的简化结果.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

According to the experimental results and the characteristics of the pressure-sensitive fractured formation, a transient flow model is developed for the deep naturally-fractured reservoirs with different outer boundary conditions. The finite element equations for the model are derived. After generating the unstructured grids in the solution regions, the finite element method is used to calculate the pressure type curves for the pressure-sensitive fractured reservoir with different outer boundaries, such as the infinite boundary, circle boundary and combined linear boundaries, and the characteristics of the type curves are comparatively analyzed. The effects on the pressure curves caused by pressure sensitivity module and the effective radius combined parameter are determined, and the method for calculating the pressure-sensitive reservoir parameters is introduced. By analyzing the real field case in the high temperature and pressure reservoir, the perfect results show that the transient flow model for the pressure-sensitive fractured reservoir in this paper is correct.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Three homologous short-chain neurotoxins, named NT1, NT2 and NT3, were purified from the venom of Naja kaouthia. NT1 has an identical amino acid sequence to cobrotoxin from Naja naja atra [Biochemistry 32 (1993) 2131]. NT3 shares the same sequence with cobrotoxin b [J. Biochem. (Tokyo) 122 (1997) 1252], whereas NT2 is a novel 6 1 -residue neurotoxin. Tests of their physiological functions indicate that NT1 shows a greater inhibition of muscle contraction induced by electrical stimulation of the nerve than do NT2 and NT3. Homonuclear proton two-dimensional NMR methods were utilized to study the solution tertiary structure of NT2. A homology model-building method was employed to predict the structure of NT3. Comparison of the structures of these three toxins shows that the surface conformation of NT1 facilitates the substituted base residues, Arg28, Arg30, and Arg36, to occupy the favorable spatial location in the central region of loop 11, and the cation groups of all three arginines face out of the molecular surface of NT1 This may contribute greatly to the higher binding of NT1 with AchR compared to NT2 and NT3. (C) 2002 Elsevier Science B,V. All rights reserved.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

Based on morphological characters, peritrich ciliates (Class Olygohymenophorea, Subclass Peritrichia) have been subdivided into the Orders Sessilida and Mobilida. Molecular phylogenetic studies on peritrichs have been restricted to members of the Order Sessilida. In order to shed more light into the evolutionary relationships within peritrichs, the complete small subunit rRNA (SSU rRNA) sequences of four mobilid species, Trichodina nobilis, Trichodina heterodentata, Trichodina reticulata, and Trichodinella myakkae were used to construct phylogenetic trees using maximum parsimony, neighbor joining, and Bayesian analyses. Whatever phylogenetic method used, the peritrichs did not constitute a monophyletic group: mobilid and sessilid species did not cluster together. Similarity in morphology but difference in molecular data led us to suggest that the oral structures of peritrichs are the result of evolutionary convergence. In addition, Trichodina reticulata, a Trichodina species with granules in the center of the adhesive disc, branched separately from its congeners, Trichodina nobilis and Trichodina heterodentata, trichodinids without such granules. This indicates that granules in the adhesive disc might be a phylogenetic character of high importance within the Family Trichodinidae.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

A model for analyzing point defects in compound crystals was improved. Based on this modified model, a method for measuring Mn content in GaMnAs was established. A technique for eliminating the zero-drift-error was also established in the experiments of X-ray diffraction. With these methods, the Mn content in GaMnAs single crystals fabricated by the ion-beam epitaxy system was analyzed.

Relevância:

100.00% 100.00%

Publicador:

Resumo:

信息技术的不断进步使得软件产品的应用领域不断扩大,同时软件产品的规模也在迅速膨胀。软件产品的开发模式已由最初的手工作坊式开发逐渐转变为大规模的工程化软件开发。这使得资源调度问题逐渐成为软件项目管理的核心研究内容之一。 软件项目与传统工业项目相比具有如下两个显著特点:其一是软件项目对人力资源能力的依赖性非常高;其二是软件项目在开发过程中具有的不确定性因素较多,也就是风险较高。这两个特点决定了传统工业调度方法不能很好地适用于软件项目管理,同时也为软件项目资源优化调度问题研究提出了新的挑战。需要根据软件项目的特点研究适合的资源调度方法为软件项目管理工作提供支持。 本文的研究工作旨在通过对软件项目的结构进行分析和描述,在建立软件项目核心要素模型的基础上,考虑软件项目高人力资源能力依赖性和高风险性两大特征,由人力资源能力和风险作为驱动因素,对软件项目中人力资源和项目缓冲两大核心资源进行优化分配和调度,以提高软件项目的资源利用效率和软件项目执行的稳定性。本文的主要贡献有: (1)建立了软件项目资源优化调度研究框架QMMT和项目核心要素模型PTHR。 QMMT研究框架由问题驱动(Question Driven),模型描述(Model Description),方法研究(Method Research)和工具验证(Tool Validation)四个模块构成。四个模块之间既存在顺序关系也存在信息反馈机制,框架具有良好的适应性和可扩展性。实践表明,QMMT研究框架对研究软件项目资源优化调度问题具有良好的指导作用。本文中涉及软件项目资源优化调度的多个研究问题均遵循QMMT研究框架。 通过对软件项目所包含的各个要素及要素之间的关系进行定义和描述,我们建立了软件项目核心要素模型PTHR。模型对软件项目的四个要素:项目(Project)、任务(Task)、人力资源(Human Resource)、风险(Risk)以及四个要素之间的关系进行了形式化定义和描述。PTHR模型涵盖了软件项目的核心要素并具有良好的可扩展性,可以为资源优化调度中具体问题的分析、算法的设计、流程的安排以及工具开发提供底层支持。PTHR模型是本文后续方法中相关系列子模型的基础模型。 (2) 提出了软件项目中任务-人员匹配的三维匹配模型3D-THM和基于3D-THM模型的任务人员优化分配方法。 任务人员匹配是人力资源调度的基础。3D-THM(3 Dimensional model for Task Human Matching)模型通过对人力资源的技术能力、性格能力和职业规划进行描述,以及对任务的技术能力需求、性格能力需求和职业规划需求进行描述,设定相应的多因素匹配算法,为任务-人员的全面优化匹配提供支持。实验表明,3D-THM模型较好的描绘了软件项目中任务-人员优化匹配问题,能够体现软件项目的高人力资源能力依赖性。模型实例化后所得到的匹配方法和相应的原型工具可为软件项目资源优化调度以及软件过程建模提供人员优化匹配支持,能够提高项目管理人员的工作效率,提升项目人员对任务分配的满意度。 (3) 提出了基于人员可用性的人力资源调度方法。 在对任务人员进行优化匹配的基础上,通过综合考虑人力资源能力和工作时间实现了基于人员可用性的人力资源调度方法。方法结合软件项目的结构特征,建立了任务人员可用性约束模型THACM(Task Human resources Availability Constraints Model)。基于THACM模型实现了在给定资源集合、任务集合下的人力资源自动分配和项目进度的自动安排。方法可有效解决采用矩阵组织结构的企业所面临的低资源可见性问题,协助其提高人力资源的利用效率。 (4)提出了基于任务优先级的抢占式人力资源调度方法PP-HAS。 在对人力资源可用性进行考虑的基础上,为了解决多项目环境下常见的资源冲突问题,我们提出了基于任务优先级的抢占式人力资源调度方法PP-HAS(Task Priority Based Preemptive Human Resource Scheduling Method)。方法首先建立了综合考虑进度、成本、质量三方面因素的基于价值的任务优先级模型VBTPM(Value Based Task Priority Model),将该任务优先级模型与过程Agent技术结合,通过设计支持抢占的人力资源调度流程,实现了多过程Agent协商下的人力资源优化调度。方法通过抢占和再计划实现了人力资源的动态高效利用,能够为资源冲突的解决以及项目的再计划工作提供决策支持。 (5)提出了风险驱动的软件项目缓冲资源分配方法。 项目缓冲的合理分配是降低风险对项目进度造成影响的重要手段。我们在软件项目资源调度方法中加入对风险因素的考量,基于软件项目中风险的特征,建立了简化的风险模型RRM(Reduced Risk Model)。基于RRM模型提出了风险驱动的项目缓冲分配方法,旨在软件项目的执行效率和稳定性二者之间进行权衡。模拟实验的结果表明,相对于传统关键链项目管理理论中尾部集中的项目缓冲分配方法,风险驱动的项目缓冲分配方法能够在确保对项目平均执行工期产生较小影响的同时,显著降低项目执行时计划变更的发生频率。该缓冲分配方法与项目模拟工具可以帮助项目经理确定合适的项目缓冲时间长度以及缓冲分配方案,进而提高软件项目计划的可信性和执行的稳定性。

Relevância:

100.00% 100.00%

Publicador:

Resumo:

选择描述黄土高原石灰性土壤氮素矿化过程的合适模型,明确可溶性有机氮(soluble organic nitrogen,SON)对矿化模型拟合效果的影响。【方法】采用长期间隙淋洗淹水培养方法,研究了10种黄土高原主要农业土壤在包括和不包括浸提液中有机氮的情况下氮素矿化过程,在此基础上选择①有效积温式;②一级反应式(One-pool模型);③两部分一级反应式(Two-pool模型);④带常数项一级反应式(Special模型)对这两种情况下的氮素矿化曲线进行拟合。【结果】发现4种模型在拟合包括SON的氮素矿化曲线时效果更好。从模型均方根误差、估计标准误差、参数误差以及与作物吸氮量的相关分析等比较发现,One-pool模型拟合效果最差,Two-pool模型和Special模型优于有效积温模型,而Special模型参数精度及与作物吸氮量的相关性更高。【结论】综合比较认为Special模型能较好反映石灰性土壤在淹水条件下的氮素矿化过程。