Effect of Rock Mass Structure and Block Size on the Slope Stability-Physical Modeling and Discrete Element Simulation

This paper studies the stability of jointed rock slopes by using our improved three-dimensional discrete element methods (DEM) and physical modeling. Results show that the DEM can simulate all failure modes of rock slopes with different joint configurations. The stress in each rock block is not homogeneous and blocks rotate in failure development. Failure modes depend on the configuration of joints. Toppling failure is observed for the slope with straight joints and sliding failure is observed for the slope with staged joints. The DEM results are also compared with those of limit equilibrium method (LEM). Without considering the joints in rock masses, the LEM predicts much higher factor of safety than physical modeling and DEM. The failure mode and factor of safety predicted by the DEM are in good agreement with laboratory tests for any jointed rock slope.

Formation, microstructure and development of the localized shear deformation in low-carbon steels

An investigation has been made into the effect of microstructural parameters on the propensity for forming shear localization produced during high speed torsional testing by split Hopkinson bar with different average rates of 610, 650 and 1500 s(-1) in low carbon steels. These steels received the quenched, quenched and tempered as well as normalized treatments that provide wide microstructural parameters and mechanical properties. The results indicate that the occurrence of the shear localization is susceptible to the strength of the steels. In other words, the tendency of the quenched steel to form a shear band is higher than that of the other two steels. It is also found that there is a critical strain at which the shear localization occurs in the steels. The critical strain value is strongly dependent on the strength of the steels. Before arriving at this point, the material undergoes a slow work-hardening. After this point, the material suffers work-softening, corresponding to a process during which the deformation is gradually localized and eventually becomes spatially correlated to form a macroscopic shear band. Examinations by SEM reveal that the shear localization within the band involves a series of sequential crystallographic and non-crystallographic events including the change in crystal orientation, misorientation, generation and even perhaps damage in microstructures such as the initiation, growth and coalescence of the microcracks. It is expected that the sharp drop in the load-carrying capacity is associated with the growth and coalescence of the microcracks rather than the occurrence of the shear localization, but the shear localization is seen to accelerate the growth and coalescence of the microcracks. The thin foil observations by TEM reveal that the density of dislocations in the band is extremely high and the tangled arrangement and cell structure of dislocations tends to align along the shear direction. The multiplication and interaction of dislocations seems to be responsible for work-hardening of the steels. The avalanche of the dislocation cells corresponds to the sharp drop in shear stress at which the deformed specimen is broken. Double shear bands and kink bands are also observed in the present study. The principal band develops first and its width is narrower than that of the secondary band.

Structure and anti-HIV activity of micrandilactones B and C, new nortriterpenoids possessing a unique skeleton from Schisandra micrantha

Two new highly oxygenated nortriterpenoids with a unique norcycloartane skeleton, micrandilactones B and C (1-2), were isolated from Schisandra micrantha; micrandilactone C ( 2) exhibited an EC50 value of 7.71 mu g/mL (SI > 25.94) against HIV-1 replication with minimal cytotoxicity, and the potent anti-HIV-1 activity and unique structural features of 2 make it a promising lead for therapeutic development of a new generation of anti-HIV drug.

The structure and function of neurons with variable nonlinear transfer function

One novel neuron with variable nonlinear transfer function is firstly proposed, It could also be called as subsection transfer function neuron. With different transfer function components, by virtue of multi-thresholded, the variable transfer function neuron switch on among different nonlinear excitated state. And the comparison of output's transfer characteristics between it and single-thresholded neuron will be illustrated, with some practical application experiments on Bi-level logic operation, at last the simple comparison with conventional BP, RBF, and even DBF NN is taken to expect the development foreground on the variable neuron.. The novel nonlinear transfer function neuron could implement the random nonlinear mapping relationship between input layer and output layer, which could make variable transfer function neuron have one much wider applications on lots of reseach realm such as function approximation pattern recognition data compress and so on.

Effect of a step quantum well structure and an electric-field on the Rashba spin splitting

Spin splitting of conduction subbands in Al_(0.3)Ga_(0.7)As/GaAs/Al_xGa_(1-x)As/Al_(0.3)Ga_(0.7)As step quantum wells induced by interface and electric field related Rashba effects is investigated theoretically by the method of finite difference. The dependence of the spin splitting on the electric field and the well structure, which is controlled by the well width and the step width, is investigated in detail. Without an external electric field, the spin splitting is induced by an in terface related Rashba term due to the built-in structure inversion asymmetry. Applying the external electric field to the step QW, the Rashba effect can be enhanced or weakened, depending on the well structure as well as the direction and the magnitude of the electric field. The spin splitting is mainly controlled by the interface related Rashba term under a negative and a stronger positive electric field, and the contribution of the electric field related Rashba term dominates in a small range of a weaker positive electric field.A method to determine the interface parameter is proposed.The results show that the step QWs might be used as spin switches.

Studies on hybridization effects of different geographic populations of Chlamys farreri - II. The medium-term growth and development of Chlamys farreri populations from China and Russia and their reciprocal crosses

Based on the research of juvenile (2, 3, 4 months) growth and survival of three populations of two different geographic areas in Chlamys farreri from Russian and China and their F, hybrids derived from Chinese cultural population (CC) female x Russian population (RW) male, Chinese wild population (CW) female x Russian population (RW) male, Russian population (RW) female x Chinese wild population (CW) the study of the medium-term (6, 8, 10, 12 months) growth and development of Chlamys farreri was carried out. The four determined results indicated that there existed different extent heterosis (3% similar to 52 %) for the growth in three types of F-1 hybrids, and the offspring derived from CC female X Rmale had a stronger heterosis among the crosses at the medium-term; the uptrend among traits are wet weight > shell width > shell length > shell height, Chinese cultural population could be recognized as excellent parent, and seasonal variations influence very much on the daily increment and growth rate of each trait of Chlamys farreri and it is only able to survive and could barely grow in winter (6 similar to 8 months), but grows fast in temperate season (10similar to12 months).

Molecular structure and expression patterns of flounder (Paralichthys olivaceus) Myf-5, a myogenic regulatory factor

Myf-5, a member of the myogenic regulatory factors (MRF), has been shown to be expressed in muscle precursors in early stage zebrafish embryos. The MRFs, including MyoD, Myf-5, Myogenin and MR-F4, belong to the basic Helix-Loop-Helix transcription factors that contain a conserved basic Helix-Loop-Helix (bHLH) domain. To better understand the role of Myf-5 in the development of fish muscles, we have isolated the Myf-5 genomic sequence and cDNA from Flounder (Paralichthys olivaceus), and analyzed its structures and patterns of expression. Promoter analysis identified several putative transcription factor binding sites such as an E-box, NF-Y sites that might confer muscle-specific expression. Myf-5 transcripts were first detected in the paraxial mesoderm that gives rise to slow muscles. During somitogenesis, Myf-5 expression was found in developing somites. Myf-5 expression decreased gradually in somites in the anterior region, but remained strong in the newly formed somites. In the hatching stage, the expression was also detected in other muscle cells such as head muscle and fin muscle. In the growing fish, RT-PCR results showed that Myf-5 was expressed in the skeletal muscle and intestine. (c) 2006 Elsevier Inc. All rights reserved.