噻吩胺基稀土配合物的合成、表征

本论文共合成了两种类型12个稀土金属配合物和一个硅化合物,分别对它们进行了红外、核磁等表征，对其中的9个配合物进行了晶体结构的测定。考察了配体结构和反应条件对所生成的配合物结构的影响，研究了稀土单烷基配合物的反应性，以及稀土双烷基配合物在烷基铝和有机硼盐的共同作用下对丁二烯聚合的催化活性和选择性。主要工作内容和结论如下： (1) 合成了噻吩苯胺配体(HL1)，该配体与(Lu，Y)稀土三烷基化合物反应，通过C–H活化和烷基消除反应制备了稀土(Lu，Y)单烷基配合物1和2，配体以少见的C，N模式配位，S原子并不参与配位。配体(HL1)与Sc三烷基化合物反应制备了配体分别以C, N和N, S配位的双配的Sc配合物5。 (2) 通过改变反应时间和溶剂体系，HL1与稀土钇三烷基化合物反应可得到罕见的由稀土烷基化物和胺化物两部分组成的配合物3，它们通过噻吩环上活化的C原子连接在一起。HL1和Lu(CH2SiMe3)2(THF)2LiCH2SiMe3在甲苯和正己烷溶剂中反应可得到以L12Lu(CH2SiMe3)2为阴离子，Li(THF)4为阳离子的离子对4。 (3) 研究配合物1和2的反应性。1和2与过量的PhSiH3反应得到中心金属与Si元素交换的Si化合物。 (4) 合成了噻吩苯基膦胺配体(HL2-4)和苯基膦胺配体(HL5)配体。HL2-5与稀土(Y, Lu和Sc)三烷基化合物反应制备了稀土双烷基配合物6，7，8，9，10，11和12。进一步研究了稀土金属双烷基配合物6–12对丁二烯的催化特性，发现该系列催化剂具有独特的催化性质，能够催化丁二烯高反1，4-聚合（91.3%），得到的聚合物分子量在1到2万之间，分子量分布较窄(1.4–1.6)。 (5) 研究了金属钇(Y)，镥(Lu)，钪(Sc)三种中心金属对丁二烯聚合活性和反式1，4选择性的影响，发现催化剂对丁二烯聚合活性和反1，4选择性取决于配合物的中心金属原子，其中选择性最高为钪配合物，催化活性最佳的为钇配合物。 (6) 研究了配体HL2-4的N-芳环上的取代基分别为甲基，乙基，异丙基时催化体系对丁二烯反式1，4聚合活性和选择性的影响，发现随着N-芳环上取代基空间位阻的增大，催化剂活性逐渐下降，选择性逐渐增加，但当其取代基为异丙基时，过大的空间位阻导致活性和选择性同时有明显的下降。我们通过改变噻吩基为苯基，比较了相同聚合条件下含噻吩基的稀土双烷基配合物和含苯基的稀土双烷基配合物对丁二烯聚合活性和选择性的影响，发现噻吩环的存在对催化剂的活性和选择性有较大的影响。 (7) 在相同催化剂条件下，研究了不同聚合条件(不同类型的AlR3，不同类型的Borate，Al/Ln比等)对丁二烯反1，4聚合活性和选择性的影响。 我们发现，在AlR3和Borate这两种影响因素中，以烷基铝的类型对催化剂催化活性和选择性的影响最大，而有机硼盐的影响则比较轻微，其中以烷基铝为AliBu3，Borate为[B(C6F5)4][Me2NHPh]时，反1，4选择性为最佳。Al/Ln增大并不能够显著增加催化剂的活性，对选择性的影响也并不明显，相反，随着铝比的增加，聚合过程中的链转移增加，导致分子量下降，对于该系列稀土烷基催化剂，最佳Ln/Al 为10。

Concise synthesis of novel practical sulfamide-amine alcohols for the enantioselective addition of diethylzinc to aldehydes

Novel sulfamide-amine alcohol ligands were designed using a grafting strategy and synthesized from readily available starting materials via a simple, efficient method. The key features of these ligands for the asymmetric addition of diethylzinc to aldehydes included stability, enhanced effectiveness without using Ti((OPr)-Pr-i)(4), suitability for a variety of aldehydes, the ability to operate at room temperature, and selectability to afford either absolute configuration products with enantiomeric excess up to >99%.

Synthesis, structure and luminescence properties of zinc (II) complexes with terpyridine derivatives as ligands

Five zinc (II) complexes (1-5) with 4 '-phenyl-2,2 ':6 ',2 ''-terpyridine (ptpy) derivatives as ligands have been synthesized and fully characterized. The para-position of phenyl in ptpy is substituted by the group (R), i.e. tert-butyl (t-Bu), hexyloxy (OHex), carbazole-9-yl (Cz), naphthalen-1-yl-phenyl-amine-N-yl (NPA) and diphenyl amine-N-yl (DPA), with different electron-donating ability. With increasing donor ability of the R, the emission color of the complexes in film was modulated from violet (392 nm) to reddish orange (604 nm). The photoexcited luminescence exhibits significant solvatochromism because the emission of the complexes involves the intra-ligand charge transfer (ILCT) excited state. The electrochemical investigations show that the complexes with stronger electro-donating substituent have lower oxidation potential and then higher HOMO level. The electroluminescence (EL) properties of these zinc (II) complexes were studied with the device structure of ITO/PEDOT/Zn (II) complex: PBD:PMMA/BCP/AlQ/ LiF/Al. Complexes 3, 4 and 5 exhibit EL wavelength at 552, 600 and 609 nm with maximum current efficiency of 5.28, 2.83 and 2.00 cd/A, respectively.

Synthesis, crystal structure, spectroscopy and electroluminescence of zinc(II) complexes containing bidentate 2-(2-pyridyl)quinoline derivative ligands

Three bidentate ligands, 4-phenyl-2-(2-pyridyl)-quinoline (ppq), 6-(carbazol-9-yl)-4-phenyl-2-(2-pyridyl)-quinoline (cpq) and 6-diphenylamino-4-phenyl-2-(2-pyridyl)-quinoline (dpq) and their zinc(II) complexes, have been designed and synthesized. The crystal structure of [Zn(ppq)(2)Cl]PF6 shows that the central zinc atom is coordinated with one chloride and four nitrogen atoms from two ligands. The introduction of an electron-donating substituent such as carbazole or an aromatic amine group at the 6-position of the quinoline moiety can generate colored tunable Zn complexes, and the photoluminescence (PL) wavelength was modulated from 418 nm for [Zn(ppq)(2)Cl]PF6 to 591 nm for [Zn(cpq)(2)Cl]PF6 and 638 nm for [Zn(dpq)(2)Cl]PF6 in CH2Cl2 solution. The electroluminescence spectrum of [Zn(dpq)(2)Cl]PF6 exhibits pure red light emission with the Commission Internationale de L'Eclairage (CIE) coordinates (0.63, 0.36) and a maximum at 648 nm.

NMR titration and molecular model MOPAC calculation of protonation processes of two MRI ligands

The protonation process of two DTPA bis(amide) derivatives, DTPA-BDMA and DTPA-BDEA, was studied by using H-1 NMR titration and MOPAC calculation. Their protonation process was proposed in the order of the central amine, the terminal amines, the central carboxyl, the terminal carboxyl, the other terminal carboxyl and central amine. During the protonation of the terminal amine, there existed a large fraction of proton transfer from the central amine to the other terminal amine.

Spectroscopic and thermal properties of short wavelength metal (II) complexes containing alpha-isoxazolylazo-beta-diketones as co-ligands

Two new azo dyes of alpha-isoxazolylazo-beta-dilcetones and their Ni(II) and Cu(II) complexes with blue-violet light wavelength were synthesized using a coupling component, different diazo components and metal (II) ions (Ni2+ and Cu2+). Based on the elemental analysis, MS spectra and FT-IR spectral analyses, azo dyes were unequivocally shown to exist as hydrazoketo and azoenol forms which were respectively obtained from the solution forms and from the solid forms. The action of sodium methoxide (NaOMe) on azo dyes in solutions converts hydrazoketo form into azoenol form, so azo dyes are coordinated with metal (II) ions as co-ligands in the azoenol forms. The solubility of all the compounds in common organic solvents such as 2,2,3,3-tetrafluoro-1-propanol (TFP) or chloroform (CHCl3) and absorption properties of spin-coating thin films were measured. The difference of absorption maxima from the complexes to their ligands was discussed. In addition, the TG analysis of the complexes was also determined, and their thermal stability was evaluated. It is found that these new metal (II) complexes had potential application for high-density digital versatile disc-recordable (HD-DVD-R) system due to their good solubility in organic solvents, reasonable and controllable absorption spectra in blue-violet light region and high thermal stability. (c) 2004 Elsevier B.V. All rights reserved.

Spectroscopic, and thermal studies of some new binuclear transition metal(II) complexes with hydrazone ligands containing acetoacetanilide and isoxazole

A new chelating ligand, 2-(2-(5-tert-butylisoxazol-3-yl)hydrazono)-N-(2,4-dimethylphenyl)-3-oxobutanamide (HL), and its four binuclear transition metal complexes, M-2(L)(2) (mu-OCH3)(2) [M = Ni(II), Co(II), Cu(II), Zn(II)], were synthesized using the procedure of diazotization, coupling and metallization. Their structures were postulated based on elemental analysis, H-1 NMR, MALDI-MS, FT-IR spectra and UV-vis electronic absorption spectra. Smooth films of these complexes on K9 glass substrates were prepared using the spin-coating method and their absorption properties were evaluated. The thermal properties of the metal(II) complexes were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC. Different thermodynamic and kinetic parameters namely activation energy (E

Nickel(II) and copper(II) complexes containing 2-(2-(5-substitued isoxazol-3-yl)hydrazono)-5,5-dimethylcyclohexane-1,3-dione ligands: Synthesis, spectral and thermal characterizations

Two new hydrazone chelating ligands, 2-(2-(5-methylisoxazol-3-yl)hydrazono)-5,5-dimethylcyclohexane-1,3-dione (HL1) and 2-(2-(5-tert-butylisoxazol-3-yl)hydrazono)-5,5-dimethylcyclohexane- 1,3-dione (HL2), and their nickel(II) and copper(II) complexes were synthesized using the procedure of diazotization, coupling and metallization. Their structures were postulated based on elemental analysis, H-1 NMR, ESI-MS, FT-IR spectra and UV-vis electronic absorption spectra. Smooth films of these complexes on K9 glass substrates were prepared using spin-coating and their absorption properties were evaluated. The thermal properties of the metal(II) complexes were investigated by thermogravimetry (TG) and differential thermogravimetry (DTG). Different thermodynamic and kinetic parameters namely activation energy (E

CBE GROWTH OF GAAS/GAAS, GAAS/SI AND ALGAAS/GAAS USING TEG, ASH3 AND AMINE-ALANE PRECURSORS

The growth of high quality AlGaAs by CBE bas been limited by the high levels of carbon and oxygen contamination. The use of alane based precursors offers a significant reduction in such contamination. We report for the first time the CBE growth of AlxGa1-xAs from triethylgallium, dimethylethylamine-alane and arsine, and compare with. growth from triethylgallium, trimethylamine-alane and arsine. Some preliminary results of work on the CBE growth of GaAs on silicon will also be reported.