Novel hole-transporting materials based on 1,4-bis(carbazolyl)benzene for organic light-emitting devices

Novel hole-transporting molecules containing 1,4-bis(carbazolyl)benzene as a central unit and different numbers of diphenylamine moieties as the peripheral groups have been synthesized and characterized. These compounds are thermally stable with high glass transition temperatures of 141-157 degreesC and exhibit chemically reversible redox processes. Their amorphous state stability and hole transport properties can be significantly improved by increasing the number of diphenylamine moieties in the outer part and by controlling the symmetry of the carbazole-based molecules. These compounds can be used as good hole-tran sporting materials for organic electroluminescent (EL) devices. The device performance based on tri- and tetra-substituted carbazole derivatives is comparable to that of a typical 4,4'-bis[N-(1-naphthyl)-N-phenylamino] biphenyl (NPB)-based device.

The performance enhancement in organic light-emitting diode using a semicrystalline composite for hole injection

A semicrystalline composite, 3, 4, 9, 10 perylenetetracarboxylic dianhydride (PTCDA) doped N,N'-di(1-naphthyl)-N,N'-diphenylbenzidine (NPB), has been fabricated and characterized. An organic light-emitting diode using such a composite in hole injection exhibits the improved performance as compared with the reference device using neat NPB in hole injection. For example, at a luminance of 2000 cd/m(2), the former device gives a current efficiency of 2.0cd/A, higher than 1.6cd/A obtained from the latter device. Furthermore, the semicrystalline composite has been shown thermally to be more stable than the neat NPB thin film, which is useful for making organic light emitting diodes with a prolonged lifetime.

尼泊尔水东哥、水麻、木姜冬青和青荚叶的化学成分研究

活性筛选中发现尼泊尔水东哥 (Saurauia napaulensis DC.) 树皮95%乙醇提取物具有α-淀粉酶抑制活性、水麻(Debregeasia orientalis) 枝叶95%乙醇提取物显示血管紧张素转化酶(ACE)抑制活性、青荚叶(Helwingia japonica (Thunb.) Dieter.) 95%乙醇提取物的中小极性部分显示蛋白酪氨酸磷酸酯酶(PTP)1B抑制活性。为全面了解它们的成分及相关活性成份，主要运用硅胶柱层析方法从这三个植物分离得到39个化合物，通过波谱分析或与已知品对照的方法对其进行了鉴定。对木姜冬青(Ilex litseaefolia Hu et Tang)的成分做了进一步的研究，取得了如下结果。 1. 从尼泊尔水东哥树皮的95%乙醇提取物分离并鉴定12个化合物： auranamide、aurantiamide benzoate、齐墩果酸、β-谷甾醇、β-胡萝卜甙、乌苏酸、2α,3α-二羟基-12-烯-28-乌苏酸、2α,3β,24-三羟基-12-烯-28-乌苏酸、(2S,3S,4R,10E)-2-[(2'R)-2' -hydroxytetracosanoylamino] -10-octadecene -1,3,4-triol、 2α,3α,24-三羟基-12-烯-28-齐墩果酸、2α,3β-二羟基-12-烯-28-乌苏酸和2α,3α,24-三羟基-12-烯-28-乌苏酸。 2. 从水麻枝叶的95%乙醇提取物分离并鉴定了18个化合物：棕榈酸、二十烷酸、二十烷酸甲酯、β-谷甾醇、Monogynol A、桦木酸、Hederagenin、β-胡萝卜甙、18αH-19(29)-烯-3-酮-乌苏烷、3，4-开环-20(30)-烯-乌苏烷-3-酸、Pomolic acid，表儿茶素、儿茶素、槲皮素、槲皮素-3-O-β-D-吡喃葡萄糖苷、紫丁香苷、紫丁香酚苷和山萘酚-3-O-芸香糖。儿茶素、槲皮素和槲皮素-3-O-β-D-吡喃葡萄糖苷为具有ACE抑制活性的成分。 3. 从木姜冬青95%乙醇提取物的乙酸乙酯部分分离并鉴定了5个化合物： 2-O-β-D-吡喃葡萄糖-6,2´-二羟基-4,4´-二香草酰氧甲基-1,1´-二苯醚（冬青苷）和四个已知化合物：七叶内酯、香草酸、3,4-二甲氧基苯乙酸和vanilloylcalleryanin。冬青苷为新化合物。 4. 从青荚叶95%乙醇提取物的中小极性部分分离并鉴定了9个化合物：β-谷甾醇、β-胡萝卜苷、羽扇豆醇、桦木醇、桦木酸、棕榈酸甘油酯、桂皮酸、6αH-4-烯-3-酮-豆甾醇和6βH-4-烯-3-酮-豆甾醇。 5. 对1985-2006年间天然二苯醚类化合物及活性研究进展进行综述. The in vitro test indicated that the 95% ethanolic extract of the barks of Saurauia napaulensis DC showed α-amylase inhibitory activity, the 95% ethanolic extract of the whole plants of Debregeasia. orientalis showed angiotensin converting enzyme (ACE) inhibitory activity and some fractions of the 95% ethanolic extract of the aerial parts of Helwingia japonica showed protein tyrosine phosphatase (PTP)1B inhibitory activity. In order to investigate components and active compounds of the three plants, they were chemically studied mainly using. Thirty-nine compounds were isolated predominantly by column chromatography identified by spectral methods or comparing them with authentic samples. Further investigation of Ilex litseaefolia Hu et Tang was carried out. Major results are as follows: 1. Twelve compounds were isolation from the 95% ethanolic extract of the barks of S. napaulensis DC. They were identified as auranamide, aurantiamide benzoate, oleanolic acid, β-sitosterol, β-daucosterol, ursolic acid, 2α,3α-dihydroxyurs-12-en-28-oic acid, 2α,3β,24-trihydroxyurs-12-en-28-oic acid, (2S,3S,4R,10E)-2-[(2'R)-2'-hydroxytetracosanoyl amino]-10-octadecene-1,3,4-triol, 2α,3α,24 -trihydroxyolean-12-en-28-oic acid, 2α,3β-dihydroxyurs-12-en-28-oic acid, and 2α,3α,24-trihydroxyurs-12-ene-28-oic acid, respectively, by spectral methods or comparing them with authentic samples. 2. Eighteen compounds were isolation from the 95% ethanolic extract of the whole plants of D. orientalis. They were identified as palmitic acid, henicosanoic acid, henicosanoic acid methyl ester, β-sitosterol, monogynol, betulinic acid, hederagenin, β-daucosterol, 18αH-urs-20(30)-en-3-one, 3,4-seco-urs-20(30)-en-3-oic acid, pomolic acid, (-)-epicatechin, (+)-catechin, quercetin, quercetin 3-O-β-D-glucopyranoside, syringin, syringiaresinol digloside and kaempferol-3-O-rutinose. (+)-Catechin, quercetin and quercetin 3-O-β-D-glucopyranoside were the ACE inhibitory active components. 3. Further phytochemical investigation of the ethyl acetate parts of 95% ethanolic extract of the whole plant of I. litseaefolia afforded 2-O-β-D-glucopyranose-4,4´-di-vanilloyloxymethyl-2,6´-dihydroxy-1,1´-diphenyl ether (ilexiside), esculetin, vanillic acid, 3,4-dimethoxybenzylacetic acid and vanilloylcalleryanin. Ilexiside was new compound. 4. Nine compounds were isolation from the 95% ethanolic extract of the whole plant of H. japonica: β-sitosterol, β-daucosterol, lupeol, betulin, betulinic acid, glycerol monopalmitate, cinnamic acid, stignast-4-en-6β-3-one and stignast-4-en-6α-3-one 5.Diphenyl ether compounds from nature between 1985-2006 were summarized.

High efficiency tandem organic light-emitting devices with Al/WO3/Au interconnecting layer

An interconnecting layer of Al (2 nm)/WO3 (3 nm)/Au (16 nm) was studied for application in tandem organic light-emitting devices. It can be seen that the Al/WO3/Au structure plays the role of an excellent interconnecting layer. The introduction of WO3 in the connection unit significantly improves the device efficiency as compared to the case of Al/Au. Thus, the current efficiency of the two-unit tandem devices is enhanced by two factors with respect to the one-unit devices. The green two-unit tandem device of indium tin oxide/MoO3/4,4(')-N,N-'-bis[N-(1-naphthyl)-N-phenyl-amino]biphenyl(NPB)/tris(8-hydroxylquinoline) aluminum (Alq(3)):10-(2-benzothiazolyl)-1,1,7,7-tetramethyl-2,3,6,7-tetrahydro-1H,5H,11H-[1]benzopyrano[6,7,8-ij]quinolizin-11-one (C545T)/Alq(3)/LiF/Al/WO3/Au/MoO3/NPB/Alq(3):C545T/Alq(3)/LiF/Al showed a maximum current efficiency of 33.9 cd/A and a power efficiency of 12.0 lm/W.

Improved performance and stability by an Al/Ni bilayer cathode in organic light-emitting diodes

Al/Ni bilayer cathode was used to improve the electroluminescent (EL) efficiency and stability in N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1' biphenyl 4,4'-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq(3))-based organic light-emitting diodes. The device with LiF/Al/Ni cathode achieved a maximum power efficiency of 2.8 lm/W at current density of 1.2 mA/cm(2), which is 1.4 times the efficiency of device with the state-of-the-art LiF/Al cathode. Importantly, the device stability was significantly enhanced due to the utilization of LiF/Al/Ni cathode. The lifetime at 30% decay in luminance for LiF/Al/Ni cathode was extrapolated to 400 It at an initial luminance of 100 cd/m(2), which is 10 times better than the LiF/Al cathode.

NaCl/Ca/Al as an efficient cathode in organic light-emitting devices

An efficient cathode NaCl/Ca/Al used to improve the performance of organic light-emitting devices (OLEDs) was reported. Standard NM-bis(1-naphthyl)-NAP-diphenyl-1,1' biphenyl 4,4'-dimaine (NPB)/tris-(8-hydroxyquinoline) aluminum (Alq(3)) devices with NaCl/Ca/Al cathode showed dramatically enhanced electroluminescent (EL) efficiency. A power efficiency of 4.6 lm/W was obtained for OLEDs with 2 nm of NaCl and 10 nm of Ca, which is much higher than 2.0 lm/W, 3.1 lm/W, 2.1 lm/ W and 3.6 lm/W in devices using, respectively, the LiF (1 nm)/Al, LiF (1 nm)/Ca (10 nm)/Al, Ca (10 nm)/Al and NaCl (2 nm)/ Al cathodes. The investigation of the electron injection in electron-only devices indicates that the utilization of the NaCl/Ca/Al cathode substantially enhances the electron injection current, which in case of OLEDs leads to the improvement of the brightness and efficiency.

High efficiency white organic light-emitting diodes based on double recombination zones

A multilayer white organic light-emitting diode (OLED) with high efficiency was present. The luminescent layer was composed of a red dye 4-(dicyanomethylene)-2-t-butyle-6-(1,1,7,7-tetra-methyljulolidyl-9-enyl)-4H-pyran (DCJTB) doped into NN-bis-(1-naphthyl)-N,N-diphenyl-1,1-biphenyl-4-4-diamine (NPB) layer and a blue-emitting 9,10-bis-(beta-naphthyl)-anthrene (DNA) layer. Red and blue emission, respectively, from DCJTB:NPB and DNA can be obtained by effectively controlling the thicknesses of DCJTB:NPB and DNA layers, thus a stable white light emission was achieved. The device turned on at 3.5 V, and the maximum luminance reached 16000 cd/m(2) at 21 V. The maximum current efficiency and power efficiency were 13.6 cd/A and 5.5 lm/W, respectively.

Synthesis and characterization of novel sulfonated polyimides from 1,4-bis(4-aminophenoxy)-naphthyl-2,7-disulfonic acid

A novel sulfonated diamine monomer, 1,4-bis(4-aminophenoxy)-naphthyl-2,7-disulfonic acid (BAPNDS), was synthesized. A series of sulfonated polyimide copolymers were prepared from BAPNDS, 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTDA) and nonsulfonated diamine 4,4'-diaminodiphenyl ether (ODA). Flexible, transparent, and mechanically strong membranes were obtained. The membranes displayed slightly anisotropic membrane swelling. The dimensional change in thickness direction was larger than that in planar. The novel SPI membranes showed higher conductivity, which was comparable or even higher than Nafion 117. Membranes exhibited methanol permeability from 0.24 x 10(-6) to 0.80 X 10(-6) cm(2)/s at room temperature, which was much lower than that of Nafion (2 x 10-6 CM2/s). The copolymers were thermally stable up to 340 degrees C. These preliminary results have proved its potential availability as proton-exchange membrane for PEMFCs or DMFCs.

Voltammetric study of the sodium ion transfer across micro-water/1,2-dichloroethane interface facilitated by terminal-vinyl liquid crystal crown ether

Sodium ion transfer across micro-water/1,2-dichloroethane (DCE) interface facilitated by a novel ionophore, terminal-vinyl liquid crystal crown ether (LCCE) was studied by cyclic voltammetry. LCCEs have potential applications because of their physicochemical properties and the utilization of crown ethers as selective ionophoric units in other functionalized compounds are interesting. Host-guest-type behavior for such compounds in the liquid-crystalline state is studied. The experimental results suggest that the transfer of the sodium ion facilitated by LCCE was controlled by diffusion of LCCE from bulk solution of DCE to the interface. The diffusion coefficient of LCCE in DCE was calculated to be equal to (3.62 +/- 0.20) x 10(-6) cm(2)/s. Steady-state voltammograms are due to sodium ion transfer facilitated by the formation of 1: 1 metal (M)-LCCE complex at the interface and the mechanism tends to be transfer by interfacial complexation or dissociation (TIC or TID). The stability constant of the complex formed was determined to be log beta(o) = 5.5 in DCE phase. The influence of parameters such as concentration of sodium ion and concentration of LCCE on the sodium ion transfer was investigated.

Sodium ion transfer across micro water/1,2-DCE interface facilitated by liquid crystal crown ether

The sodium ion transfer across the micro-water/1,2-dichloroethane interface facilitated by a novel ionophore, liquid crystal crown ether was studied systematically. The sodium ion transfer facilitated by LCCE is controlled by diffusion studied by cyclic voltammetry. The diffusion coefficient of LCCE in 1,2-dichloroethane was calculated to be equal to (2.61 +/- 0.12) X 10(-6) cm(2)/s and the stability constant of the complex between Na+ and LCCE was determined as lg beta (o) = 5.7 in 1,2-dichloroethane.

Cure processing modeling and cure cycle simulation of epoxy-terminated poly(phenylene ether ketone) .1. DSC characterization of curing reaction

The curing reaction process of epoxy-terminated poly(phenylene ether ketone) (E-PEK) with 4,4'-diaminodiphenyl sulfone (DDS) and hexahydrophthalic acid anhydride (Nadic) as curing agents was investigated using isothermal differential scanning calorimetry (IDSC) and nonisothermal differential scanning calorimetry (DDSC) techniques. It was found that the curing reactions of E-PEK/DDS and E-PEK/Nadic are nth-order reactions but not autoaccelerating. The experimental results revealed that the curing reaction kinetics parameters measured from IDSC and DDSC are not equivalent. This means that, in the curing reaction kinetics model for our E-PEK system, both isothermal and nonisothermal reaction kinetics parameters are needed to describe isothermal and nonisothermal curing processes, The isothermal and nonisothermal curing processes were successfully simulated using this model. A new extrapolation method was suggested. On the basis of this method the maximum extent of the curing reaction (A(ult)) that is able to reach a certain temperature can be predicted. The A(ult) for the E-PEK system estimated by the new method agrees well with the results obtained from another procedure reported in the literature. (C) 1997 John Wiley & Sons, Inc.

The synthesis of a 1,1'-bi-2-naphthol-based bis(ether anhydride) and aromatic polyimides derived therefrom

2,2'-Bis(3,4-dicarboxyphenoxy)-1,1'-binaphthyl dianhydride was used as a new monomer with various aromatic diamines to obtain polyimides by the usual two-step method. The bis(ether anhydride) was prepared by a nucleophilic substitution of I,1'-bi-2-naphthol with N-phenyl-4-chlorophthalimide, N-methyl-4-nitrophthalimide or 4-nitrophthalonitrile in aprotic polar solvent, and subsequent hydrolysis of the resulting bis(ether imide)s or bis(ether dinitrile), and then dehydration of the corresponding tetracarboxylic acid to afford the dianhydride. Most of the obtained polyimides were soluble in chloroform, pyridine, DMF, etc. The polyimide prepared from p-phenylene diamine was partial crystalline, whereas the others showed amorphous patterns in a WAXD study. These polymers have glass transition temperatures between 255-294 degrees C and 5% weight loss temperatures in the range of 502-541 degrees C in nitrogen and 473-537 degrees C in air. (C) 1997 Elsevier Science Ltd.

The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s .1. Poly(oxybiphenyl-4-4'-diyloxy-1,4-phenylenecarbonyl-1,3-phenylenecarbonyl-1,4-phenylene)

Crystal structure and polymorphism induced by uniaxial drawing of a poly(aryl ether ketone) [PEDEKmK] prepared from 1,3-bis(4-fluorobenzoyl)benzene and biphenyl-4,4'-diol have been investigated by means of transmission electron microscopy (TEM), electron diffraction (ED), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) techniques. The melting and recrystallization process in the temperature range of 250-260 degrees C, far below the next melting temperature (306 degrees C), was identified and found to be responsible for the remarkable changes in lamellar morphology. Based on WAXD and ED patterns, it was found that crystal structure of isotropic-crystalline PEDEKmK obtained under different crystallization conditions (melt-crystallization, cold-crystallization, solvent-induced crystallization, melting-recrystallization, and crystallization from solution) keeps the same mode of packing, i.e., a two-chain orthorhombic unit cell with the dimensions a = 0.784 nm, b = 0.600 nm, and c = 4.745 nm (form I). A second crystal modification (form II) can be induced by uniaxial drawing above the glass transition temperature, and always coexists with form I. This form also possesses an orthorhombic unit cell but with different dimensions, i.e., a = 0.470 nm, b = 1.054 nm, c = 5.064 nm. The 0.32 nm longer c-axis of form II as compared with form I is attributed to an overextended chain conformation due to the expansion of ether and ketone bridge bond angles during uniaxial drawing. The temperature dependence of WAXD patterns for the drawn PEDEKmK suggests that form II can be transformed into the more stable form I by relaxation of overextended chains and relief of internal stress at elevated temperature in absence of external tension.