High performance 1689-nm quantum well diode lasers

1689-nm diode lasers used in medical apparatus have been fabricated and characterized. The lasers had pnpn InP current confinement structure, and the active region consisted of 5 pairs of InGaAs quantum wells and InGaAsP barriers. Stripe width and cavity length of the laser were 1.8 and 300 pm, respectively. After being cavity coated. and transistor outline (TO) packaged, the lasers showed high performance in practice. The threshold current was about 13 +/- 4 mA, the operation current and the lasing spectrum were about 58 6 mA and 1689 +/- 6 nm at 6-mW output power, respectively. Moreover, the maximum output power of the lasers was above 20 mW.

非线性系统的任意项精细积分外插多步法及其在混沌数值分析中的应用

对非线性系统提出了高精度的精细积分任意项外插多步法的计算公式。本方法只需增加插值项数即可提高计算精度，同时不会增加过大的计算量，发展完善了精细积分法。将本方法应用于混沌方程中，取得了较好的效果。数值计算结果表明，该方法是一种高精度、高效率的方法，在求解混沌系统上比传统方法有很大的优势。

Interactions of Penny-Shaped Cracks in Three-Dimensional Solids

The interaction of arbitrarily distributed penny-shaped cracks in three-dimensional solids is analyzed in this paper. Using oblate spheroidal coordinates and displacement functions, an analytic method is developed in which the opening and the sliding displacements on each crack surface are taken as the basic unknown functions. The basic unknown functions can be expanded in series of Legendre polynomials with unknown coefficients. Based on superposition technique, a set of governing equations for the unknown coefficients are formulated from the traction free conditions on each crack surface. The boundary collocation procedure and the average method for crack-surface tractions are used for solving the governing equations. The solution can be obtained for quite closely located cracks. Numerical examples are given for several crack problems. By comparing the present results with other existing results, one can conclude that the present method provides a direct and efficient approach to deal with three-dimensional solids containing multiple cracks.

Sinusoidal phase-modulating laser diode interferometer for measuring angular displacement

We propose a sinusoidal phase-modulating laser diode interferometer for measuring small angular displacement. The interferometer is based on a Fabry-Perot plate. It has a simple structure and is insensitive to external disturbance. Sinusoidal phase-modulating interferometry is used for improving the measurement accuracy. A charge-coupled device (CCD) image sensor is used for measuring the distance between the reflected beams from two faces of the Fabry-Perot plate. From the distance, the initial angle of incidence is calculated. Compared with Michelson interferometers and autocollimators, this interferometer has the advantage of compact size and simple structure. The numerical calculation and experimental results verify the usefulness of this novel interferometer. (C) 2004 Society of Photo-Optical Instrumentation Engineers.

基于孔径耦合带状线的激光脉冲整形系统

实现了一种新型的激光脉冲整形系统，该系统使用了一个由孔径耦合带状线（ACSL）电脉冲整形器驱动的电光调制器。一个电脉冲整形器由两条通过其公共接地板上的耦合孔径发生耦合作用的带状传输线所组成的四端口装置。更换具有不同耦合孔径的公共接地板，该电脉冲整形发生器可以具有150ps时间结构的任意整形电脉冲。将任意整形的电脉冲输入到电光调制器上，就可以得到任意整形的激光脉冲。利用该系统，激光脉冲整形系统能够产生具有150ps前后沿，1～3ns脉冲宽度可调、高对比度、光滑过渡以及任意整形的激光脉冲。

Temperature characteristics of optical parameters of phthalocyanine LB films and spin-coated films

The LB films and spin-coated films of tetra-neopentoxy phthalocyanine zinc (TNPPcZn) were prepared and annealed at different temperatures. Their refractive index (n) and extinction coefficient (k) were measured by p-polarized reflectance. The similar value of n and k, as well as similar changing tendency of it and k at varied annealing temperatures, was found between LB films and spin-coated films. In addition, the absorption curves of TNPPcZn LB films and spin-coated films in visible range at different annealing temperature were investigated. The results indicate that the changing tendency of the extinction coefficient of two kinds of TNPPcZn films obtained from two methods mentioned above were coincident. When the annealing temperature increased to 150 degrees C, the monomers of TNPPcZn films transformed to aggregates, n(f) and k(f) of the films increased. Further, n(f) and k(f) decreased as aggregates changed back to monomers again at the annealing temperature of 300 degrees C. The experimental results coincide well with the theoretical analysis. (C) 2004 Elsevier B.V. All rights reserved.

葡萄属植物系统学研究

葡萄属（Vitis.L.）植物隶属于葡萄科(Vitaceae)，主要分布于北温带，最南可以分布到南美洲的委内瑞拉和亚洲的越南以及印度北部。本文通过对该属分类研究历史的回顾，认为该属存在的问题主要表现在如下几个方面： 1）葡萄属自1753 年由Carl Linne创立以来，虽经planchon于1887年做了修订，但属的范围仍需进一步界定;2）在Planchon之后的100多年中未见有一全面的分类学修订工作，出现在该属的800多个名称需要考证;3）对一些广布种的变异认识不足，导致了大量可疑种。针对这些问题本文进行了如下几个方面的工作： l、形态学：通过大量的野外工作和标本观察，对该属植物的主要性状做了分析，讨论了这些性状状态在葡萄属中的变异规律及演化趋势，将灌木状习性、退化的卷须以及不裂的叶片视为进化的性状。 2、细胞学：利用前人对葡萄属(Vitis.L.)染色体数目的统计及一些杂交实验分析的结果，结合形态学等方面的特征分析，认为在葡萄科，染色体基数X=10为原始的，而x=19则为衍生的。葡萄属的染色体基数xl9(2n=38)，多倍体较少见;麝香葡萄属[Muscadinia (Planch.) Sma11]的染色体基数为x=10 (2n=20)．与蛇葡萄属、酸蔹藤属和爬山虎属的一致。葡萄属和麝香葡萄属间的杂种是不育的。 3、孢粉学：对葡萄属32种5变种及麝香葡萄属[Muscadinia (Planch.) Sma11]1种的花粉外壁做扫描电镜观察，结果发现花粉外壁雕纹在这两属间和葡萄属内变异较小，对区分属以及属下种上类群意义不大，但对种的鉴别有重要的价值。 4、植物化学：前人对植物化学的工作表明，植物的一些次生代谢产物如类黄酮化合物在葡萄科各类群中的分布规律较好地反映了各类群间的关系。这些结果较好地支持了Planchon对葡萄属范围的界定。 5、山葡萄复合体(V.amurensis complex)包括山葡萄(V.amurensis Rupr.)、燕山葡萄(V.amuresis Rupr. var. dissecta Skvorts.=var.yanshanensisD．Z．Lu et H．P．Liang)、百花山葡萄(V.baihuashanensis M．S．Kang et D．Z．Lu)、复叶葡萄(V.piasezkii Maxim.)、少毛复叶葡萄[V. piasezkii Maxux1．var. pagnuccii (Planch.) Rehd.]共3个种和2个变种，广泛分布于中国北方，形态变异较大。本文对该复合体做了形态分析，并用RAPD (Random Amplified Polymorphic DNAs)分子标记方法分析了这几个类群的关系。综合这些结果，归并了燕山葡萄和百花山葡萄。 在上述工作的基础上，我们得出了如下的结论： l、葡萄属在葡萄科中是一个进化的类群。整理后的葡萄属包括8系62种、l亚种和15变种，其中有2个新系、1个新组合系、2个新变种、1个新组合种和l3个新异名。 2、本文赞同SmaU在1903年作出的分类学处理，把麝香葡萄作为一个独立的属，比葡萄属原始但与葡萄属有着最近的亲缘关系。 3、依据形态特征和APD分析结果把山葡萄复合体的3个种2变种归并为2种l变种，即山葡萄、复叶葡萄和少毛复叶葡萄，认为分子标记技术在分析属内近缘种闻关系上很有价值。 4、葡萄属具有东亚和北美2个现代分布中心，该属可能起源于北美的东部，在晚白垩纪经白令陆桥散布至欧亚大陆。

一种改进的高分辨率RFLPs 分析

国家自然科学基金和云南省自然科学基金资助