Size hierarchies affecting the social interactions and growth of juvenile Japanese flounder, Paralichthys olivaceus

Japanese flounder Paralichthys olivaceus (T. & S.)juveniles were size-graded and divided into three groups (small, large, and mixture of small and large flounder), and their social interactions (feeding, aggressive attacking and activity) and growth were investigated. The growth of the small flounder was markedly suppressed by the presence of the large flounder. Large flounder did not significantly suppress the overall food intake of the small flounder but exhibited high aggressive attacking on them and consequently inhibited their activity. Size dominance showed little influence on the aggressive behavior, feeding, activity and growth of the large flounder. The large flounder could not effectively defend the food in excess during the experiments ruling out disproportional food acquisition as the primary mechanism responsible for the size hierarchy effect. Aggressive interaction of the large flounder on the small flounder might be an important cause for the growth retardation of the small flounder. In culture, size grading could markedly improve the growth and survival of the early juvenile flounder. (C) 2004 Elsevier B.V. All rights reserved.

不同干扰条件下社会认知偏离者两半球协同功能研究

Previous studies have witnessed some psychological or behavioral deviation (such as aggressive behavior) might have an association with cerebral hemisphere cooperative dysfunction, however, it is still unclear whether there is an association between individuals with social cognitive bias and their hemispheric cooperative functions especially while the interhemisphere cooperative processing is under the conditions of emotional interferences. The purpose of this study is to explore the differences between the social cognitive bias group and the normal group’s interhemispheric cooperative functional activity under the conditions of with or without interferences. Methods: According to Dodge’s (1993) model of “social-cognitive mechanisms in the development of conduct disorder and depression”, a 51 items of “social cognitive bias scale” was created and was used to screen the high score group. 20 male subjects was composed of high score group and other 23 matched the control group. Stimulus tachistoscopically presented to the bilateral visual field and compared with the central. Both group’s interhemispheric cooperative functional activity were observed and compared under the conditions of without interference- i.e. base level and with the emotional interferences of white noise level and negative evaluative feedback speech level while finishing: experiment one: Chinese word-figure Stroop analogue task; experiment two: two single Chinese Characters combination task. Heart rate and respiratory rate were simultaneously recorded as index of emotional changes. Results: ① The high score group showed a decrease in processing accuracy compared with the normal group under the condition of white noise interference level in experiment one. ② Still under the condition of white noise interference level, there were more reaction time and more errors were observed in high score group than normal in experiment two. ③ Both groups showed speed up effect and the strategic processing tendency of speed-accuracy trade-off effect under the condition of white noise interference level in both experiments. ④ Between group differences of interhemipheric cooperative function were not observed under the conditions of base level and the negative evaluative feedback speech level within both experiments. Conclusion: The results suggested that interhemispheric cooperative functional differences exists between the two groups, characterized as ① differences existed in interhemispheric cooperative processing strategy between the two groups, with the high score group presented “hierarchic” deficiency strategy. ② the appearance of the differences between the two groups were condition specified , and in this research it was only under the white noise interference condition. ③ the features of the differences between the two groups were the differences on multidimensional performances and with a deficit orientation in high score group. ④ the varieties of the differences were changing with cooperative tasks, as in this research the high score group performed worse in complementary cooperative task. In addition, both group adjusted the processing strategy respectively under the condition of white noise evoked emotional interference implied that the interaction between the interhemisphere cooperative processing and emotion might exist.

攻击性、情绪调节评价对青少年攻击行为的作用

The aggressive behavior and the violent crime of the Adolenscents have aroused social widespread attention. The Social Implicit Cognition Method could overcome the insufficiency of explicit research methods such as Self-Report Scale, and carry on the thorough discussion to the intrinsic mechanism of the Adolenscent’s aggressive behavior. In this research, Implicit Association Test and Explicit Questionnaire are synthetically applied to inspect the relations among the aggression, Evaluation of Emotion Regulation and the aggressive behavior of the normal middle-school students and the Adolenscent violent criminals under the explicit and implicit conditions, and have carried the supplement to the internal condition of the General aggression model (GAM). The result indicates, 1. The concept of implicit aggression exists independently and separates from explicit aggression. However the relations between implicit aggression and the groups are remarkable, i.e. both the implicit and explicit aggressions of the Adolenscent violent criminals are remarkably higher than those of the normal middle-school students, but not influenced by sex factors. 2. Implicit Evaluation of Emotion Regulation is suitable to Chinese Adolenscents. The correlation of groups and sex factors exist to Implicit Evaluation of Emotion Regulation, i.e. in the group of criminals, the female inclines to the mood control compared with the male in the aspect of Implicit Evaluation of Emotion Regulation; however, in the group of normal persons, the difference between male and female is not remarkable in the aspect of Implicit Evaluation of Emotion Regulation. 3. Under the explicit conditions, it is discovered that the remarkable explicit aggression can predict violent criminals. But it is adjusted by Explicit Evaluation of Emotion Regulation, i.e. the predicting function is not remarkable when the Explicit Evaluation inclines to expression. Meanwhile, when checking the functions and the effects of the implicit variables after the explicit conditions are under control, it is discovered that the predicting function of implicit aggression is still remarkable, and the predicting function of Implicit Evaluation of Emotion Regulation is remarkable at the edge and also adjusted by sex factors. These findings help us not only understanding thoroughly the intrinsic mechanism of the Adolenscent’s aggressive behavior, discovering the moderating role of Evaluation of Emotion Regulation on aggression, but also providing an academic foundation on the prevention and intervention of the Adolenscent’s aggressive behavior.

A Review of Studies on the Mechanical Behavior of Microcellular Plastics

对微孔泡沫塑料力学行为的研究文献进行了综述,简单介绍了微孔泡沫塑料的制备和表征方法,重点介绍了微孔泡沫塑料力学性能的研究工作,其中也包括作者近期在该领域的一些工作。这些工作主要讨论了微孔泡沫塑料的压缩、拉伸、冲击、疲劳和黏弹性效应。最后：给出了对该领域工作的一些讨论和展望。

Size-dependent inelastic behavior of particle-reinforced metal-matrix composites

The strengthening behavior of particle-reinforced metal-matrix composites (MMCp) is primarily attributed to the dislocation strengthening effect and the load-transfer effect. To account for these two effects in a unified way, a new hybrid approach is developed in this paper by incorporating the geometrically necessary dislocation strengthening effect into the incremental micromechanical scheme. By making use of this hybrid approach, the particle-size-dependent inelastic deformation behavior of MMCp is given. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

Effects of Microstructural Heterogeneity on the Spallation Behavior of Materials

It is of utmost importance to understand the spallation behaviour of heterogeneous materials. In this paper, a driven nonlinear threshold model with stress fluctuation is presented to study the effects of microstructural heterogeneity on continuum damage evolution. The spallation behavior of heterogeneity material is analyzed with this model. The heterogeniety of mesoscopic units is characterized in terms of Weibull modulus m of strength distibution and stress fluctuation parameter k. At high stress, the maximum damage increases with m; while at low stress, the maximum damage decreases. In addition, for low stress, severe stress fluctuation causes higher damage; while for high stress, causes lower damage.

Indentation Creep Behavior in Ce-Based Bulk Metallic Glasses at Room Temperature

The room temperature creep behaviors of Ce-based bulk metallic glasses were examined by the use of nanoindentation. The creep rate and creep rate sensitivity of Ce-based BMGs were derived from indentation creep curves. The low creep rate sensitivity of Ce-based BMGs indicates that the room temperature creep is dominated by localized shear flow. The experimental creep curves can be described by a generalized Kelvin model. Furthermore, the creep retardation spectrum is calculated for the Ce-based metallic glasses. The results showed that creep retardation spectrum consists of two relatively separated peaks with the well defined characteristic relaxation times.

Dynamic behavior of a cylindrical crack in a functionally graded interlayer under torsional loading

In this paper the problem of a cylindrical crack located in a functionally graded material (FGM) interlayer between two coaxial elastic dissimilar homogeneous cylinders and subjected to a torsional impact loading is considered. The shear modulus and the mass density of the FGM interlayer are assumed to vary continuously between those of the two coaxial cylinders. This mixed boundary value problem is first reduced to a singular integral equation with a Cauchy type kernel in the Laplace domain by applying Laplace and Fourier integral transforms. The singular integral equation is then solved numerically and the dynamic stress intensity factor (DSIF) is also obtained by a numerical Laplace inversion technique. The DSIF is found to rise rapidly to a peak and then reduce and tend to the static value almost without oscillation. The influences of the crack location, the FGM interlayer thickness and the relative magnitudes of the adjoining material properties are examined. It is found among others that, by increasing the FGM gradient, the DSIF can be greatly reduced.

Formation, Thermal Stability and Deformation Behavior of Graphite-Flakes Reinforced Cu-based Bulk Metallic Glass Matrix Composites

Graphite-flake reinforced Cu47Ti34Zr11 Ni-8 bulk metallic glass matrix composite was fabricated by water-cooled copper mould cast. Most of the graphite flakes still keep unreacted and distribute uniformly in the amorphous matrix except that some reactive wetting occurs by the formation of TiC particles around the flakes. It reveals that the presence of graphite flakes does not affect the onset of the glass transition temperature, crystallization reaction and liquidus of the metallic glass. The resulting material shows obvious serrated flow and higher fracture strength under room temperature compressive load, comparing with the monolithic bulk metallic glass (BMG). Three types of interaction between the shear bands and graphite flakes, namely, shear band termination, shear bands branching and new shear bands formation near the graphite flakes can be observed by quasi-static uniaxial compression test and bonded interface technique through Vickers indentation.

3D Anisotropic Elastoplastic-Damage Model and its Application in Simulating the Behavior of Rock Materials

A 3D anisotropic elastoplastic-damage model was presented based on continuum damage mechanics theory. In this model, the tensor decomposition technique is employed. Combined with the plastic yield rule and damage evolution, the stress tensor in incremental format is obtained. The derivate eigenmodes in the proposed model are assumed to be related with the uniaxial behavior of the rock material. Each eigenmode has a corresponding damage variable due to the fact that damage is a function of the magnitude of the eigenstrain. Within an eigenmodes, different damage evolution can be used for tensile and compressive loadings. This model was also developed into finite element code in explicit format, and the code was integrated into the well-known computational environment ABAQUS using the ABAQUS/Explicit Solver. Numerical simulation of an uniaxial compressive test for a rock sample is used to examine the performance of the proposed model, and the progressive failure process of the rock sample is unveiled.

Strain Gradient Effects on Deformation Strengthening Behavior of Particle Reinforced Metal Matrix Composites

Dislocation models with considering the mismatch of elastic modulus between matrix and reinforcing particles are used to determine the effective strain gradient \ita for particle reinforced metal matrix composites (MMCp) in the present research. Based on Taylor relation and the kinetics of dislocation multiplication, glide and annihilation, a strain gradient dependent constitutive equation is developed. By using this strain gradient-dependent constitutive equation, size-dependent deformation strengthening behavior is characterized. The results demonstrate that the smaller the particle size, the more excellent in the reinforcing effect. Some comparisons with the available experimental results demonstrate that the present approach is satisfactory.

PMMA with Long-Persistent Phosphors and Its Behavior of Luminescence

A new kind of rare earth material with high efficient long-persistent phosphors, such as SrAl2O4: Eu, Dy, has been developed in recent years. The PMMA with long-persistent phosphors is typical one of applications for the phosphors. In this work, we try to probe into the affection of the manufacture process on the PMMA with long-persistent phosphors, to analyze its performance, and its luminescence behavior, especially to study the self-excitation of the PMMA with long-persistent phosphors.

Plastic constitutive behavior of short-fiber/particle reinforced composites

A cylindrical cell model based on continuum theory for plastic constitutive behavior of short-fiber/particle reinforced composites is proposed. The composite is idealized as uniformly distributed periodic arrays of aligned cells, and each cell consists of a cylindrical inclusion surrounded by a plastically deforming matrix. In the analysis, the non-uniform deformation field of the cell is decomposed into the sum of the first order approximate field and the trial additional deformation field. The precise deformation field are determined based on the minimum strain energy principle. Systematic calculation results are presented for the influence of reinforcement volume fraction and shape on the overall mechanical behavior of the composites. The results are in good agreement with the existing finite element analyses and the experimental results. This paper attempts to stimulate the work to get the analytical constitutive relation of short-fiber/particle reinforced composites.

Strain Rate-Dependent Compressive Deformation Behavior of Nd-Based Bulk Metallic Glass

Compressive deformation behavior of the Nd60Fe20Co10Al10 bulk metallic glass was characterized over a wide strain rate range (6.0 x 10(-4) to 1.0x10(3) s(-1)) at room temperature. Fracture stress was found to increase and fracture strain decrease with increasing applied strain rate. Serrated flow and a large number of shear bands were observed at the quasi-static strain rate (6.0 x 10(-4)s(-1)). The results suggest that the appearance of a large number of shear bands is probably associated with flow serration observed during compression; and both shear banding and flow serration are a strain accommodation and stress relaxation process. At dynamic strain rates (1.0 x 10(3) s(-1)), the rate of shear band nucleation is not sufficient to accommodate the applied strain rate and thus causes an early fracture of the test sample. The fracture behavior of the Nd60Fe20Co10Al10 bulk metallic glass is sensitive to strain rate.