Effects of the orientation of microgravity on the concentration distribution in crystallization from solution

A quasi-steady state growth and dissolution in a 2-D rectangular enclosure is numerically investigated. This paper is an extension to indicate the effects of the orientation of gravity on the concentration field in crystallization from solution under microgravity, especially on the lateral non-uniformity of concentration distribution at the growth surface. The thermal and solute convection are included in this model.

气旋限流效应及其在大功率激光气动窗口上应用的可能性

分析了进口气旋对收缩型喷管流量的影响。强气旋能显著地降低流量。对大功率气体激光气动窗口应用进口气旋预计可节省抽气功率;缩短窗口长度。

Study on cracked plates, shells and 3 dimensional bodies

This paper presents a summary of the authors' recent work in following areas: (1) The stress-strain fields at crack tip in Reissner's plate. (2) The calculations of the stress intensity factors in finite size plates. (3) The stress-strain fields at crack tip in Reissner's shell. (4) The calculations of the stress intensity factors and bulging coefficients in finite size spherical shells. (5) The stress-strain fields along crack tip in three dimensional body with surface crack. (6) The calculation of stress intensity factors in a plate with surface crack.

煤粉燃烧中NO_x和SO_x生成的详细反应机理模拟

采用详细化学反应机理与CFD方法耦合的煤粉燃烧数值模拟程序,计算了煤粉燃烧过程中CO,NOx和SOx等的浓度分布特性.通过与实验对照,验证了数值模拟方法的可靠性,并分析了燃烧温度和煤粉细度等因素对于NO生成的影响.结果表明温度对于NO的生成影响较大,随着温度的增加, NO的生成浓度明显增加;对于不同煤种,可能存在一个温度点,这时NO的生成速率将非常快;在计算范围内,温度对SO2的最终生成浓度没有明显影响,而只影响SO2的释放过程.煤粉细度对于NO生成有较小的影响.

瑞利泰勒不稳定性中尺度效应的数值模拟研究(英文)

　瑞利 泰勒不稳定性是一种由于密度梯度引起的界面不稳定性,在惯性约束聚变中具有重要的意义。利用被动标量输运模型对包含不同尺度初始扰动的界面演化过程进行数值模拟。计算结果表明界面的初始形状对不稳定性的发展具有很大的影响,狭长型扰动比正方型扰动发展慢。另外,不同尺度扰动的相互作用一般会减小沿界面发展方向运动的动能,使能量更多地用于平行于界面方向的运动。

爆炸变形定向战斗部壳体变形分析

本文根据刚塑性最小加速度原理 ,建立了在非对称爆炸冲击载荷作用下自由圆柱壳体的分析模型 ,在不同辅助装药分位角和变形初速条件下 ,用该模型分别计算了相应的壳体最终变形。模拟实验表明 ,实验结果和计算结果比较吻合

用于多参数生化检测微系统的葡萄糖传感器的研究

基于生物酶催化的电化学电流检测原理对人体血液生化参数进行测试.利用MEMS技术将电极、酶、反应室以及微型流路等单片集成,研制单一生物芯片的多电极酶传感器目的是同时测定人体血液的多个生化参数.本文主要介绍传感器芯片的工作原理、结构设计、加工技术及初步实验结果,其中葡萄糖在磷酸盐缓冲盐水(PBS)中的测试范围为1～30 m*mol/L,可以满足临床血糖检测的要求.

Study on the interaction of intense femtosecond laser pulses with nanometre-sized hydrogen clusters

The interaction of intense femtosecond laser pulses with hydrogen clusters has been experimentally studied. The hydrogen clusters were produced from expansion of high-pressure hydrogen gas (backed up to 8x10(6)Pa) into vacuum through a conical nozzle cryogenically cooled by liquid nitrogen. The average size of hydrogen clusters was estimated by Rayleigh scattering measurement and the maximum proton energy of up to 4.2keV has been obtained from the Coulomb explosion of hydrogen clusters under 2 x 10(16)W/cm(2) laser irradiation. Dependence of the maximum proton energy on cluster size and laser intensity was investigated, indicating the correlation between the laser intensity and the cluster size. The maximum proton energy is found to be directly proportional to the laser intensity, which is consistent with the theoretical prediction.

瓦级双包层光纤超荧光光源的实验研究

采用大功率半导体激光器抽运25m掺Yb双包层光纤，在单程装置中，前向(SPF)和后向(SPB)分别获得了1．46w和1．82w最大超荧光功率，斜度效率分别为23．4％0和29．2％，3dB带宽最大为11nm。采用特定范围波长双色镜作为前腔镜，形成双程前向(DPF)装置，获得最大超荧光输出功率2．12W，此时斜度效率为43．2％，中心波长在1070nm，输出光谱平坦性较好，3dB带宽从单程的11nm提高到42nm。

HfO2 膜料中的杂质对薄膜损伤及性能的影响

By analysis of impurity elements in HfO2 coating material, the influence of main impurity elements on the characteristic of coatings were studied. The results indicate that the metal elements and absorptive dielectric elements damage the HfO2 coatings. The more the Zr element content is, the more the absorption is for the coatings in ultraviolet wave. The negative ion element will become the gas source center and form an ejection in the process of evaporation of coating material, so decrease the damage threshold of the coatings.

SiO_2薄膜折射率的准确拟合分析

精确的光学常数对于设计和制备高品质的光学薄膜非常重要,尤其是那些光学性能对折射率变化敏感的薄膜。SiO_2是一种常用的低折射率材料,因与常用基底折射率相近使其准确拟合有一定难度。实验通过离子束溅射制备了SiO_2单层膜。考虑测量时的误差和基底折射率的影响,采用透射率包络和反射率包络得到了SiO_2的折射率,并用所得折射率进行反演来对这两种途径在实际测量拟合过程中的准确性进行比对。分析表明,剩余反射率在实际的测量过程中误差更小,直接用测量镀膜前后基片的剩余反射率值可以更简便更准确地得到SiO_2的折射率,能达到10~(-2)的精度。

一种采用海藻糖季铵盐的吸湿保湿剂及其制备方法

本发明涉及日化领域及医药行业，具体是一种采用海藻糖季铵盐的吸湿保湿剂及其制备方法。采用海藻糖季铵盐的吸湿保湿剂，以海藻糖季铵盐作为吸湿保湿剂。制备方法：所述海藻糖季铵盐由按摩尔质量比为1：4-6的经碱性异丙醇溶液处理的海藻糖与醚化剂在40℃-60℃条件下反应3-9 h,而后抽滤、烘干即得；所述醚化剂为3-氯-2-羟丙基三甲基氯化铵。本发明通过有效的合成手段得到的海藻糖季铵盐，生产成本提高甚微，吸湿保湿性能提高明显。作为一种高效的吸湿保湿因子，本发明得到的海藻糖季铵盐有望成为透明质酸的替代品用于化妆品中。

Flavobacterium anhuiense sp nov., isolated from field soil

A novel strain, D3(T), isolated from a field-soil sample obtained from Anhui Province, PR China, was characterized taxonomically by using a polyphasic approach. The cells were Gram-negative, yellow-pigmented rods devoid of flagella, but showing gliding motility. The organism was able to grow at 5-37 degrees C and at pH 4.0-10.0. A comparative 16S rRNA gene sequence analysis indicated that strain D3(T) is a member of the genus Flavobacterium, sharing highest sequence similarity with the type strain of Flavobacterium defluvii (96.7 %). The major isoprenoid quinone was MK-6 and the predominant fatty acids were iso-C-15:0, summed feature 3 (C-16:1 omega 7c and/or iso-C-15:0 2-OH) and C-16:0. The DNA G + C content was 31.4 mol%. On the basis of phylogenetic and phenotypic data, strain D3(T) represents a novel species within the genus Flavobacterium, for which the name Flavobacterium anhuiense sp. nov. is proposed. The type strain is D3(T) (=KCTC 22128(T)= CGIVICC 1.6859(T)).