新材料与材料制备新工艺研讨会选辑前言

新材料与材料制备新工艺研讨会选辑前言洪友士中国科学院力学研究所，北京１０００８０１９９４年８月，中科院力学所在青岛举办了“新材料与材料制备新工艺高级研讨班”。有４０多位研究人员参加了此次学术研讨，其中有７位特邀代表，他们是：中科院固体物理所葛庭燧院士...

分子法激光分离同位素中的物理化学气体动力学研究

<正> 尽管激光分离同位素(LIS)才出现十几年,但由于其突出优点,受到世界各国的重视,发展极快。其中有大量课题与力学紧密相关,但迄未见到从这两个乍看起来关系不大的学术领域的结合上作出的总结和评述。本文希望填补这一空白。 1.激光同位素分离 从天然矿物或人工产物中将对人类用处较大的同位素分离出来,对于国民经济和军事应用十分重要。例如,天然矿物中铀235的含量只有约0.7％;而世界

星系螺旋结构三维密度波的流体动力学理论(Ⅰ)——局部解及局部Jeans稳定性的讨论

本文是作者的盘状星系三维密度波工作的第一部分.文中给出了在厚度参数ε及准单色波参数ε_

力学和它的发展

<正> 为什么十七世纪以前没有真正的“科学”? 公元前三世纪,希腊文化曾经有过高度的发展。阿基米德(287—212,B.C.)的静力学,欧几里得(300,B.C.)的几何学,都是杰出的科学先驱例子。但是最有影响的亚里士多德(384—322,B.C.)的动力学,却是一些荒谬的唯心臆测。可是由于亚里士多德在学术界的权威性,他的思想整整统治了西方经院学派达两千年之久,其中经过随着希腊文化的衰

SiC_p/6151Al复合材料的微结构效应

利用分离式Hopkinson压杆和MTS通用材料试验机研究了SiC_p/6151Al颗粒增强复合材料在不同应变率下的变形行为和增强颗粒的尺寸对复合材料微结构及变形行为的影响。结果表明，对于在不同应变率下的SiC_p/6151Al复合材料，增强颗粒尺寸大小的流动应力高于增强颗粒尺寸的流动应力。根据位错强化理论中的Hall-Petch关系对这个结果进行了解释。首次在实验上观测到增强颗粒对复合材料微损伤-微带形成的影响，并根据微带（microband）形成的双位错墙理论（double dislocation walls）, 分析了增强颗粒对复合材料微带损伤及力学性能影响的微结构效应。

脉冲激光辐照ZrO_2涂层的18-8不锈钢快凝组织与精细结构

利用脉冲辐照研究超高温度梯度下表层预轩ZrO_2纳米颗粒涂层的18-8奥氏体不锈钢的快凝组织形态、微结构特征及力学性质，结果表明，在表层约15μm范围内形成Zr的合金化微区，Zr最大含量(原子分数)为43.3%，但Zr成分分布存在不连续特征；预置纳米ZrO_2陶瓷涂层明显提高了激光作用深度。超高温梯度和高冷却速度显著细化了快凝亚组织并得到超细枝晶及胞晶，并观察到位错胞及栅栏孪晶两类亚晶，而激光熔区的外延生长机制未使晶粒细化。激光辐照后，合金化区硬度增加而弹性模量降低，其余部分硬度增加而弹性模量无变化。

冲击载荷作用下容器壳体动态响应的初步数值研究

本文针对带椭球封头的爆炸容器,黑索今(RDX)在中心处的爆炸用点爆炸模型描述,利用四阶Runge-Kutta法求解一组常微分方程得到爆炸近场的自相似解。采用有限体积形式的PPM格式求解轴对称Euler方程,得到了容器内冲击波传播及其演化的图象。以计算得到的冲击载荷为基础,修改HONDO程序,壳体弹塑性模型采用J_2流动理论描述。对冲击波和壳体的耦合作用进行了初步的数值研究。计算结果表明:容器内爆炸冲击波和壳体中应力波的传播及其演化与物理上的定性分析结果是一致的。由于应力波传播速度较冲击波快,因此,在冲击波未到达的静止流场,流场出现扰动声波,并向中心传播。封头顶点附近出现最大变形。在中等载荷作用下,可忽略壳体变形对流场的影响。

Entanglement purification with higher error threshold for imperfection of local operations and bell state measurements

We analyse further the entanglement purification protocol proposed by Feng et al. (Phys. Lett. A 271 (2000) 44) in the case of imperfect local operations and measurements. It is found that this protocol allows of higher error threshold. Compared with the standard entanglement purification proposed by Bennett et al. [Phys. Rev. Lett. 76 (1996) 722], it turns out that this protocol is remarkably robust against the influences of imperfect local operations and measurements.

Defects in U3+: CaF2 single crystals grown under different conditions by the temperature gradient technique

Defects in as-grown U3+ : CaF2 crystals grown with or without PbF2 as an oxygen scavenger were studied using Raman spectra, thermoluminescence glow curves, and additional absorption (AA) spectra induced by heating and gamma-irradiation. The effects of heating and irradiation on as-grown U3+: CaF2 crystals are similar, accompanied by the elimination of H-type centers and production of F-type centers. U3+ is demonstrated to act as an electron donor in the CaF2 lattice, which is oxidized to the tetravalent form by thermal activation or gamma-irradiation. In the absence of PbF(2)as an oxygen scavenger, the as-grown U3+:CaF2 crystals contain many more lattice defects in terms of both quantity and type, due to the presence of O2- impurities. Some of these defects can recombine with each other in the process of heating and gamma-irradiation. (c) 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

LBO晶体上1064nm，532nm二倍频增透膜的设计及误差分析

采用矢量合成法设计了LiB3O5（LBO）晶体上1064nm，532nm二倍频增透膜，在1064nm处的反射率为0．0014％，532nm处的反射率为0．0004％。根据误差分析，薄膜制备时沉积速率精度控制在＋6．5％时，1064nm处的反射率增加至0．22％，532nm处增加至0．87％。材料折射率的变化控制在＋3％时，1064nm处的反射率达0．24％，532nm处达0．22％。沉积速率和折射率控制的负变化不增大特定波长处的剩余反射率。与膜层折射率相比，薄膜物理厚度对剩余反射率的影响小。低折射率膜层的

Influence of different post-treatments on the structure and optical properties of zinc oxide thin films

Zinc oxide (ZnO) films with c-oriented were grown on fused quartz glass substrates at room temperature using dc reactive magnetron sputtering. The as-grown films were annealed at 700 degrees C in air and bombarded by ion beam, respectively. The effects of post-treatments on the structural and optical properties of the ZnO films were investigated by X-ray diffraction (XRD), photoluminescence (PL), optical transmittance and absorption measurements. The XRD spectra indicate that the crystal quality of ZnO films has been improved by both the post-treatments. Compared with the as-grown sample, both annealed and bombarded samples exhibited blueshift in the UV emission peaks, and a strong green emission was found in the annealed ZnO film. In both optical transmittance and absorption spectra, a blueshift of the band-gap edge was observed in the bombarded film, while a redshift was observed in the annealed film. (c) 2004 Elsevier B.V. All rights reserved.

Annealing effects on electron-beam evaporated Al2O3 films

The effects of post-deposited annealing on structure and optical properties of electron-beam evaporated Al2O3 single layers were investigated. The films were annealed in air for 1.5 h at different temperatures from 250 to 400 degrees C. The optical constants and cut-off wavelength were deduced. Microstructure of the samples was characterized by X-ray diffraction (XRD). Profile and surface roughness measurement instrument was used to determine the rms surface roughness. It was found that the cut-off wavelength shifted to short wavelength as the annealing temperature increased and the total optical loss decreased. The film structure remained amorphous even after annealing at 400 degrees C temperature and the samples annealed at higher temperature had the higher rms surface roughness. The decreasing total optical loss with annealing temperature was attributed to the reduction of absorption owing to oxidation of the film by annealing. Guidance to reduce the optical loss of excimer laser mirrors was given. (c) 2004 Elsevier B.V. All rights reserved.