芒果炭疽病[Colletotrichum gloeosporioides (Penz)]生物学及其综合防治研究

在云南景谷芒果种植区, 芒果炭疽病对芒果树嫩叶、嫩梢、花穗和果实为害率分别为85.7％、63.4％、77.1％和73.3％。风雨和昆虫媒介是传播的主要方式。发生为害最适温度为22℃--25℃, 相对湿度为85％--100％。该病在景谷种植区全年均可发生为害, 主要为害在发生期。发生前期为害, 是花穗干瘪和幼果掉落的原因之一。采取综合防治措施, 特别在发生前期适时防治, 可控制发生为害。

人工湿地-池塘复合养殖系统中浮游藻类生态特征

采用放养了斑点叉尾鮰苗种和少量白鲢的人工湿地-池塘复合养殖系统研究各养殖塘浮游藻类的生态特征,并通过对不同密度养殖塘的比较探讨人工湿地对鱼塘中浮游藻类生态结构的调节作用。结果表明,塘中共鉴定出浮游藻类7门63属142种,其中绿藻门34属60种,硅藻和蓝藻分别有10属34种、10属30种,裸、隐、甲、金藻门种类较少,共9属18种。各养殖塘优势种类主要为四尾栅藻(Scenedesmus quadricauda)、衣藻(Chlamydomonas sp.)、二角盘星藻(Pediastrum duplex)、小环

太平湖水库藻类演替与营养侦别研究

本文报告了1992～1993年间对安徽省太平湖水库藻类的演变以及库水营养侦别试验的研究结果。与1985～1986年资料相比,整个水库的藻类种类多样性下降,总种类数由175种降为112种,减少了1/3。藻类种类小型化现象十分明显,相隔6～7年,小型藻类的种类及其数量越来越多,单个藻细胞鲜重的平均值在敞水区和库湾区分别减少了63.6％和75.4％;平均细胞密度则分别增长了3.6和5.6倍;生物量的变化不大,增长不足1倍。营养侦别试验结果表明,磷仍然是该水库的主要限制因子,库水的藻类生长潜力约为对照培养基的1/

石羊河下游民勤绿洲景观变化与生态安全研究

民勤绿洲位于我国西北干旱区内陆河石羊河流域的下游。近些年来，随着该流域中、上游地区大量截留水资源，使进入民勤绿洲的地表水资源量逐年减少，导致绿洲生态环境不断恶化，生态安全面临着严重危机。本论文应用景观生态学原理与方法，综合运用3S技术，通过多时相遥感数据的对比分析，系统研究了民勤绿洲景观格局动态演变过程、形成原因及其与重要生态过程的相互作用，并在此基础上对绿洲生态安全的时空变化进行了综合评价。主要研究成果：1．景观格局影响生态过程，研究景观格局可以揭示生态过程变化的内在原因。因此，景观空间格局研究一直以来是景观生态学研究的核心与热点之一。应用景观空间格局分析软件FRAGSTATS对绿洲近14年的景观格局及其变化过程的定量研究表明，开荒与弃耕始终存在于景观的演变过程中，导致景观中林地、荒草地、耕地与沙地斑块类型的相互转化。开荒作用主要发生在1987-1998年间并导致林地与荒草地斑块转化成耕地斑块，绿洲耕地面积在此时期逐渐增加；弃耕作用主要发生在1998年至2001年间并导致耕地斑块逐渐转化成沙地斑块或荒草地斑块，耕地面积在此时期逐渐减少014年来，绿洲沙漠化过程逐年发展，主要表现为林地与荒草地斑块与耕地斑块逐渐转变成沙地斑块，导致沙地斑块面积（CA）逐渐增加，而斑块数量（NP）逐渐减少，使得沙地平均斑块大小（MPS）逐渐增大，沙地斑块呈现集中连片式的分布趋势。由于林草地斑块的逐渐减少以及耕地与沙地斑块的增加导致绿洲的多样性（SHOI）、均匀性（SHEI）与平行与并列指数（IJI）逐渐降低，而连通性（CONGTAG）逐渐增强，绿洲景观格局越来越强烈地受到沙地与耕地斑块类型的控制。绿洲景观的连通性上升的幅度（CONTAG）是坝区＞泉山区＞湖区。景观的多样性（SHDI）与均匀性（SHEI）下降的幅度是坝区＞泉山区＞湖区。坝区景观的衰退过程（沙地面积的增幅）与人类对该灌区的开发强度（耕地面积的增幅）与都强于泉山区与湖区。2．景观变化的主要驱动因素包括自然、社会与经济因素。绿洲景观格局的演变是以上因素综合作用的结果。干早区绿洲的形成机制决定了其发展与演变强烈地受到水资源的质与量的支配，水资源条件的变化是驱动该绿洲景观演变的主导因素。由于中、上游地区为满足经济发展的需要，大量截留地表水资源使进入下游民勤绿洲的地表水资源从50年代的年平均5.42亿m3锐减到2001年的0.73亿m3，致使绿洲地下水的补给量减少，而耕地面积的扩大导致地下水的超采量增加，引发土地干旱化与盐碱化，大量沙生植被枯萎、死亡，弃耕地增加。民勤绿洲用水模式进步缓慢、管理效率低下、人口的快速增长、农业技术推广速度缓慢以及土地使用制度等因素共同作用形成了推动景观变化的复杂人文机制。水资源的减少与人文机制共同作用驱动着绿洲景观的演变过程。3．指出绿洲景观的生态安全应包括景观的格局安全与过程安全两个方面。景观格局与生态过程密不可分，绿洲景观格局影响生态过程，生态过程“塑造”景观格局。利用ARCv正W的空间分析功能，从景观格局的空间邻接特征角度研究景观斑块类型受沙漠化威胁与盐碱化威胁的程度，并在此基础上分析生态安全。结果表明坝区耕地、林地、荒草地受沙漠化威胁程度高于其它两个灌区，湖区的耕地、林地、草地受盐碱化威胁的程度高于其它两个灌区。水对干旱区绿洲的重要性决定了水生态过程研究是绿洲生态安全研究的重要方面。利用ARCMAP的空间插值的地统计分析功能对绿洲的地下水埋深与地下水矿化度进行空间插值，得到地下水埋深与地下水矿化度的时空分布，结果表明：各时期绿洲地下水埋深为中心深，边缘浅，表明地下水降落漏斗的存在与不断加深。14年来地下水位的平均下降速率，坝区最快，泉山区次之，湖区最慢，三灌区分别为0.75m、0.7m与0.60m。绿洲北部地下水矿化度显著升高，14年来泉山区地下水矿化度上升为1.36倍，湖区南部地下水矿化度上升1.47倍，湖区北部地下水矿化度上升为1.43倍，地下水矿化度平均值达到5.6g/L，成为绿洲地下水矿化度最高地带，也是作物产量锐减的地带，因此地下水矿化度的上升导致作物安全生长潜在格局发生变化，作物安全生长区面积缩小，而中度以上不安全生长区面积扩大，造成了作物的减产与农业产业结构调整的空间缩小，难度加大。4．绿洲为水、土、植被、气候、社会经济与人类活动等众多方面所组成的、彼此相互联系的复杂的社会一经济一生态复合系统。因此绿洲的生态安全的综合评价涉及吸素众多，必须采用定量与定性相结合的方法进行科学地评价。采用目前较为成熟的环境综合评价方法一层次分析法AHP，并构建绿洲景观生态安全评价指标体系，对绿洲景观生态安全进行综合评价，结果表明：绿洲及各灌区生态安全水平逐年降低，目前生态安全值与1987年的相比，绿洲为68％，坝区73.7％，泉山区为63.6％，湖区为65.2％。三灌区中坝区的生态安全水平在各时期都是最高的，其次为泉山区，湖区最低。14年间生态安全下降幅度较大的为泉山区与湖区，坝区生态安全水平下降幅度较小。5．将绿洲生态环境恶化所导致的经济损失值量化，运用市场价值法与机会成本法对近14年来由于绿洲的环境恶化导致对社会经济发展所产生的不良后果从植被死亡、土地盐渍化导致作物减产、弃耕地出现导致的土地生产力的丧失与地下水位下降所导致的机井报废与提水成本增加四个方面进行经济效益损失估算，结果为经济损失值是湖区＞坝区＞泉山区，分别达到53786万元、44276.22万元、39247.36万元。坝区以林木死亡所造成的经济损失最大，湖区与泉山区以土地盐渍化所造成的经济损失最大。经济损失值占同期当地国民生产总值的百分比是湖区＞泉山区＞坝区，分别达到76.39％、55.04％、28.48％。可见绿洲的社会经济发展是以牺牲生态环境，降低生态安全水平为代价，这将严重制约绿洲今后的可持续发展。

快速凝固 Ti-Zr-Ni 合金的电化学贮氢性能

采用铜辊快速凝固方法制备了Ti45Zr30Ni25和Ti50Zr25Ni25合金,并对合金作为镍-氢二次电池负极的动力学和电化学性能进行了研究。结果表明,Ti45Zr30Ni25为非晶相合金,Ti50Zr25Ni25合金由准晶相和非晶相组成。两合金电极的最大放电容量分别为129和132mAh/g。在240mA/g电流密度下,高倍率放电性能(HRD)分别为62.7%和63.3%。合金电极的交换电流密度分别为205.1和375.6mA/g,氢在合金中的扩散系数分别为5.4×10-11和5.8×10-11cm2·s-1

植物群落生物量和有机碳对高寒草甸土地利用变化的响应

在中国科学院海北高寒草甸生态系统定位站地区,选择高寒矮嵩草草甸及其开垦后形成的农田和一年生人工草地作为研究对象,研究了高寒草甸不同土地利用方式下生物量和植物-土壤系统固定的有机碳量的变化。结果表明：3种土地利用方式相比较,地上生物量由高到低依次为人工草地〉农田〉高寒草甸（P〈0.01）,分别为11.83、9.78和4.36 t/hm~2;3种土地利用方式下地下生物量剖面分布均呈倒金字塔形,0～40 cm地下生物量为高寒草甸〉人工草地〉农田（P〈0.01）,分别为15.74、5.61和1.24 t/hm~2。随着高寒草甸土地利用方式改变,植物群落碳素固定量也随之减小,其序列由高到低依次为：高寒草甸〉人工草地〉农田（P〈0.05）,其值分别为7.63、6.81和4.51 t/hm~2。

超临界CO2萃取九叶青花椒和大红袍花椒挥发油的化学成分分析及香气比较

采用超临界CO2萃取法提取九叶青花椒和大红袍花椒挥发油，以气相色谱-质谱仪对其化学成分进行检测，用色谱峰面积归一化法确定各化学成分的相对含量，评香师对花椒挥发油的香气进行评价。结果表明，超临界萃取的九叶青花椒挥发油得率为7％，鉴定出63个化合物，属青香型花椒油；超临界萃取的大红袍花椒挥发油得率为4％，鉴定出80个化合物，属浓香型花椒油；两种花椒挥发油的化学成分含量和香气有明显差异，但都保留了各自品种的天然香气特征.

Green light-emitting polyfluorenes with improved color purity incorporated with 4,7-diphenyl-2,1,3-benzothiadiazole moieties

By incorporating 4,7-diphenyl- 2,1,3 benzothiadiazole instead of 2,1,3-benzothiadiazole into the backbone of polyfluorene, we developed a novel series of green light- emitting polymers with much improved color purity. Compared with the state-of-the-art green light-emitting polymer, poly(fluorene-co-benzothiadiazole) (lambda max = 537 nm), the resulting polymers (lambda(max) = 521 nm) showed 10-20 nm blueshifted electroluminescence (EL) spectra and greatly improved color purity because the insertion of two phenylene units between the 2,1,3-benzothiadiazole unit and the fluorene unit reduced the effective conjugation length in the vicinity of the 2,1,3-benzothiadiazole unit. As a result, the resulting polymers emitted pure green light with CIE coordinates of (0.29, 0.63), which are very close to (0.26, 0.65) of standard green emission demanded by the National Television System Committee (NTSC). Moreover, the insertion of the phenylene unit did not affect the photoluminescence (PL) and EL efficiencies of the resulting polymers. PL quantum efficiency in solid films up to 0.82 was demonstrated. Single-layer devices (ITO/PEDOT/ polymer/Ca/Al) of these polymers exhibited a turn-on voltage of 4.2 V, luminous efficiency of 5.96 cd A(-1) and power efficiency of 2.21 lm W-1. High EL efficiencies and good color purities made these polymers very promising for display applications.

SYNTHESIS AND CRYSTAL-STRUCTURE OF NEODYMIUM COMPLEX OF 1-METHYL-1, 4, 7, 10-TETRAAZACYCLODODECANE

The complex [Nd(L)(CH3CN)(CF3SO3)3] has been synthesized. Where L = 1-methyl-1, 4, 7, 10-tetraazacycldodecane. The crystal structure of the complex has been determined by a four-circle X-ray diffractometer to a final deviation factor B value of 0.0370 and R(w) value of 0.0385 respectively. The crystal is triclinic system, space group P1BAR with a = 0.8738(2), b = 1.2870(3), c = 1.2900(3) nm, alpha = 85.63(2), beta = 87.25(2), gamma = 78.30(2)-degrees, V = 1.41571 (60) nm3, Z = 2, D(c) = 1.92 g/cm3. The neodymium ion is eight-coordinated to forming a distorted square antiprism.

Magnetron Sputtering Growth of InAs0.3Sb0.7 Films on (100) GaAs Substrates: Strong Effect of Growth Conditions on Film Structure

The growth of highly lattice-mismatched InAs0.3Sb0.7 films on (100) GaAs Substrates by magnetron Sputtering has been investigated and even epitaxial lnAs(0.3)Sb(0.7) films have been successfully obtained. A strong effect of the growth conditions on the film structure was observed, revealing that there was a growth mechanism transition from three-dimensional nucleation growth to epitaxial layer-by-layer growth mode when increasing the substrate temperature. A qualitative explanation for that transition was proposed and the critical conditions for the epitaxial layer-by-layer growth mode were also discussed.

对童氏"7.5B"计算及乙型水驱法的改进

研究了童宪章院士"7.5B"的准确性和适应性,指出了"7.5B"方法只适用于多个油田的统计计算,而不完全适应于单一油藏.从理论上推导了"7.5B"的数学表达式,给出了一条准确计算该值的有效途径.对童氏水油比与采出程度关系乙型水驱法及采出程度与含水关系图版作了改进.

Coherent Structures in Transition of a Flat-Plate Boundary Layer at Ma=0.7

Direct numerical simulation (DNS) of a spatially evolving flat-plate boundary layer transition process at free stream Mach number 0.7 is performed. Tollmien-Schlichting (T-S) waves are added on the inlet boundary as the disturbances before transition. Typical coherent structures in the transition process are investigated based on the second invariant of velocity gradient tensor. The instantaneous shear stress and the mean velocity profile in the transition region are studied. In our view, the fact that the peak value of shear stress in the stress concentration area increases and exceeds a threshold value during the later stage of the transition process plays an important role in the laminar breakdown process.

Study of the Adsorption of Fibrinogen on Gold-Coated Silicon Wafer by an Impedance Method

In 0.1 mol/l KH2PO4–Na2HPO4 (pH 7.80) buffer solution, the potential of zero charge (PZC) and the open circuit potential of gold-coated silicon were determined to be about −0.6 and +0.10 V (vs SCE), respectively. The open circuit potential was higher than the PZC, which indicated that the surface of the gold-coated electrode had a positive charge. The ellipsometry experiment showed that the adsorption of fibrinogen onto the gold-coated silicon wafer surface arrived at a saturated state when the adsorption time exceeded 50 min. The percentage of surface without adsorbed protein, θ, was about 63%. This means that the proportion of surface actually occupied by fibrinogen was only about 37% after the adsorption arrived at saturation. The solution/protein capacitance value was determined in an impulse state around −0.59 V (vs SCE) and was stable (4.2×10−5 F) at other potentials.

Computer Simulation Of Random Sphere Packing In An Arbitrarily Shaped Container

Most simulations of random sphere packing concern a cubic or cylindric container with periodic boundary, containers of other shapes are rarely studied. In this paper, a new relaxation algorithm with pre-expanding procedure for random sphere packing in an arbitrarily shaped container is presented. Boundaries of the container are simulated by overlapping spheres which covers the boundary surface of the container. We find 0.4 similar to 0.6 of the overlap rate is a proper value for boundary spheres. The algorithm begins with a random distribution of small internal spheres. Then the expansion and relaxation procedures are performed alternately to increase the packing density. The pre-expanding procedure stops when the packing density of internal spheres reaches a preset value. Following the pre-expanding procedure, the relaxation and shrinking iterations are carried out alternately to reduce the overlaps of internal spheres. The pre-expanding procedure avoids the overflow problem and gives a uniform distribution of initial spheres. Efficiency of the algorithm is increased with the cubic cell background system and double link data structure. Examples show the packing results agree well with both computational and experimental results. Packing density about 0.63 is obtained by the algorithm for random sphere packing in containers of various shapes.