Parameters Inversion of Fluid-Saturated Porous Media Based on Neural Networks

The multi-layers feedforward neural network is used for inversion of material constants of fluid-saturated porous media. The direct analysis of fluid-saturated porous media is carried out with the boundary element method. The dynamic displacement responses obtained from direct analysis for prescribed material parameters constitute the sample sets training neural network. By virtue of the effective L-M training algorithm and the Tikhonov regularization method as well as the GCV method for an appropriate selection of regularization parameter, the inverse mapping from dynamic displacement responses to material constants is performed. Numerical examples demonstrate the validity of the neural network method.

黏弹性体界面裂纹的冲击响应

研究两半无限大黏弹性体界面Griffith裂纹在反平面剪切突加载荷下，裂纹尖端动应力强度因子的时间响应。首先，运用积分变换方法将黏弹性混合边值问题化成变换域上的对偶积分方程。通过引入裂纹位错密度函数进一步化成Cauchy型奇异积分方程。运用分片连续函数法数值求解奇异积分方程，得到变换域内的动应力强度因子。再用Laplace积分变换数值反演方法，将变换域的解反演到时间域内，最终求得动应力强度因子的时间响应，并对黏弹性参数的影响进行了分析。

The Effect of Conical Flowfields on the Performance of Waveriders at Mach 6

The performance of 23 kinds of waveriders, derived from different conical flowfields, is analyzed by the numerical computation under the conditions of fight speed of Mach 6, attack angle of 0° and flight altitude of 30 km. These results indicate that the performance is influenced by the shapes and the width to height ratios (W/H ) of generating cones. The geometrical parameter and the lift coefficient are proportional to W/H, while the drag coefficient and the lift to drag ratio (L/D ) have extreme values. Considering the base drag and the computation errors, the waverider with the highest L/D is cut from the elliptical cone’s flowfield (W/H = 1.5―1.618), and the configuration with the lowest drag can also be obtained at W/H = 1:1.5. Accordingly, good suggestions are proposed for practical design based on these computational results.

平行于裂纹方向的载荷对于疲劳裂纹扩展速率的影响

<正> 1. 引言断裂力学在疲劳裂纹扩展的研究中得到了成功的应用。但是,现有的疲劳裂纹扩展数据大都是从单向加载的试件上得到的。而实际构件通常处于双向载荷或多向载荷的状态下。在对构件作寿命估计时,双向载荷对于疲劳裂纹扩展速率的影响是一个必须要考虑的因素。在1966年Christensen等曾指出,实验表明在双向载荷下疲劳裂纹扩展速率为单向载荷时的三倍,但它只给出了实验结果的示意图。后来有限的一些实验数据得出各不相同的结论。大部分试验结果表明,平行于裂纹方向的载荷对于裂纹扩展的影响很小。也有数据表明它会加快或减慢裂纹扩展。

地形对洋流影响的初步实验模拟

在旋转流动系统中,由于柯氏力的作用,地形对流动的影响常呈现出与惯性系中很不相同的特点,近年来在地球物理流体力学研究中受到很大重视。 本文介绍了作者们在力学所旋转实验台上,针对近海洋流问题所作的一些旋转流体中地形影响的初步实验研究,在一扇形容器中用源汇法模拟了洋流的陆架地形绕流,过海脊流,绕岛屿以及沿径向有变深度地形的环流,这些初步的定性的结果表明,均质旋转流动系统确能反映大尺度旋转流动的某些动力学特征。

6马赫锥体流场对乘波体性能的影响及规律

以CFD计算为分析工具，在6马赫飞行速度、0°飞行攻角和30km飞行高度的设计条件下，综合分析了23种源自不同锥体流场所获乘波体的性能．分析结果表明，基本锥体的截面形状及截面宽高比均对乘波体性能有较大影响；当基本锥体的宽高比变化时，相应乘波体几何参数和升力系数的变化基本与之呈正比关系，而阻力系数及升阻比则出现极值．此外，我们发现在此飞行状态下，综合考虑乘波体底部阻力及计算误差等因素，当基本锥体为椭圆锥，且截面椭圆宽高比在1．5～1．618时，所获得的乘波体具有最大的升阻比；而当截面椭圆宽高比约为1：1．5时，所获得乘波体阻力最小．依据所得的计算结果，对于乘波飞行器的实际设计给出了相应的建议．

爆炸波对水泥试样损伤破坏的实验研究

通过水中爆炸波对水泥试样的损伤破坏实验来模拟水力裂缝层内爆炸采油中激波使岩石损伤开裂的现象.结果表明,试样预制剖面上的裂纹分布可以近似代表其内部的裂纹分布规律.观察到了四个破坏区域:压实破坏区、压实损伤区、拉伸损伤区和拉伸破坏区,并对这些区域特征做了详细描述;利用冲击波的相关理论,对水泥试样损伤开裂的机理做了初步分析.研究发现,裂纹的起裂扩展与水泥试样的初始损伤有密切关系;并且裂纹的形状受炸药与水泥试样尺度比值以及炸药的安放位置等条件控制.最后通过对压实破坏区渗透率实验,发现压实破坏区也有较好的渗透性,这对层内爆炸采油技术的深入研究具有重要意义.

Quantum interference in laser-induced nonsequential double ionization in diatomic molecules: Role of alignment and orbital symmetry

We address the influence of the orbital symmetry and the molecular alignment with respect to the laser-field polarization on laser-induced nonsequential double ionization of diatomic molecules, in the length and velocity gauges. We work within the strong-field approximation and assume that the second electron is dislodged by electron-impact ionization, and also consider the classical limit of this model. We show that the electron-momentum distributions exhibit interference maxima and minima due to electron emission at spatially separated centers. The interference patterns survive integration over the transverse momenta for a small range of alignment angles, and are sharpest for parallel-aligned molecules. Due to the contributions of the transverse-momentum components, these patterns become less defined as the alignment angle increases, until they disappear for perpendicular alignment. This behavior influences the shapes and the peaks of the electron-momentum distributions.

Interaction between single molecules of Mac-1 and ICAM-1 in living cells: An atomic force microscopy study

The interaction between integrin macrophage differentiation antigen associated with complement three receptor function (Mac-1) and intercellular adhesion molecule-1 (ICAM-1), which is controlled tightly by the ligand-binding activity of Mac-1, is central to the regulation of neutrophil adhesion in host defense. Several "inside-out" signals and extracellular metal ions or antibodies have been found to activate Mac-1, resulting in an increased adhesiveness of Mac-1 to its ligands. However, the molecular basis for Mac-1 activation is not well understood yet. In this work, we have carried out a single-molecule study of Mac-1/ICAM-1 interaction force in living cells by atomic force microscopy (AFM). Our results showed that the binding probability and adhesion force of Mac-1 with ICAM-1 increased upon Mac-1 activation. Moreover, by comparing the dynamic force spectra of different Mac-1 mutants, we expected that Mac-1 activation is governed by the downward movement of its alpha 7 helix. (c) 2007 Elsevier Inc. All rights reserved.

棱镜自重变形对波面影响的研究

采用有限元方法分析了单棱镜在重力作用下三个典型位置的表面变形，对棱镜表面φ425nm通光孔径轴向变形量进行Zernike多项式拟合，画出了相应的波差图，并确定设计方案．进一步选择φ360mm口径光束对双棱镜在几种典型相对位置下进行光线采样、追迹，计算得到不同情况下由于双棱镜自重变形引起的总波差．

Spectroscopic, and thermal studies of some new binuclear transition metal(II) complexes with hydrazone ligands containing acetoacetanilide and isoxazole

A new chelating ligand, 2-(2-(5-tert-butylisoxazol-3-yl)hydrazono)-N-(2,4-dimethylphenyl)-3-oxobutanamide (HL), and its four binuclear transition metal complexes, M-2(L)(2) (mu-OCH3)(2) [M = Ni(II), Co(II), Cu(II), Zn(II)], were synthesized using the procedure of diazotization, coupling and metallization. Their structures were postulated based on elemental analysis, H-1 NMR, MALDI-MS, FT-IR spectra and UV-vis electronic absorption spectra. Smooth films of these complexes on K9 glass substrates were prepared using the spin-coating method and their absorption properties were evaluated. The thermal properties of the metal(II) complexes were investigated by thermogravimetry (TG) and differential scanning calorimetry (DSC. Different thermodynamic and kinetic parameters namely activation energy (E

靶镜光学质量检测技术的研究

提出了一种利用扫描型哈特曼检测装置检验靶镜光学质量的技术.该装置对传统哈特曼检验装置的光阑进行了改进,通过扫描型哈特曼光阑的旋转扫描,可对被检靶镜全口径范围内连续采样.利用该扫描型哈特曼检测装置对一块口径为φ270 mm的非球面靶镜的能量集中度和波像差进行了检验,其结果与激光数字波面干涉仪的测量结果相吻合,其中能量集中度的相对测量误差为7.7%,波像差的相对测量误差为10.2%,验证了该检测技术的有效性.