Jet:progress in performance and understanding

In 1990 JET operated with a number of technical improvements which led to advances in performance and permitted the carrying out of experiments specifically aimed at improving physics understanding of selected topics relevant to the "NEXT STEP". The new facilities include beryllium antenna screens, a prototype lower hybrid current drive system, and modification of the NI system to enable the injection of He-3 and He-4. Continued investigation of the hot-ion H-mode produced a value of n(D)(0)tau-E(T)(i)(0) = 9 x 10(20)m-3s keV, which is near conditions required for Q(DT) = 1, while a new peaked density profile H-mode was developed with only slightly lower performance. Progress towards steady state operation has been made by achieving ELMy H-modes under certain operating conditions, while maintaining good tau-E values. Experimental simulation of He ash transport indicates effective removal of alpha-particles from the plasma core for both L and H mode plasmas. Detailed analyses of particle and energy transport have helped establish a firmer link between particle and energy transport, and have suggested a connection between reduced energy transport and reversed shear. Numerical and analytic studies of divertor physics carried out for the pumped divertor phase of JET have helped clarify the key parameters governing impurity retention, and an intensive model validation effort has begun. Experimental simulation of alpha-particle effects with beta-fast up to 8% have shown that the slowing down processes are classical, and have given no evidence of deleterious collective effects.

基于强激光辐照固体锡靶产生极紫外光源的实验研究

建立了一套利用高功率YAG激光器辐照固体锡靶产生高转换效率极紫外光(extreme ultraviolet)源的实验装置.利用建立的实验装置开展了极紫外光源的强度和转换效率与抽运激光强度关系的实验研究,发现极紫外光源的转换效率随抽运激光强度的变化具有饱和效应.实验发现:当抽运激光能量达到250mJ时,极紫外光源的转换效率最高,波长为13.5nm处0.27nm带宽范围内的极紫外光源的能量转换效率为1.6%,此时对应的激光强度为1.8×1011W/cm2.

莱州湾区域表层沉积物中多氯化萘、多溴联苯醚和氯化石蜡的研究

本研究建立了沉积物中氯化石蜡（CPs）的分析方法，对莱州湾和该区域主要河流的表层沉积物中多氯萘（PCNs），多溴联苯醚（PBDEs）和CPs进行了分析，获得了他们在研究区域的含量水平、空间分布和单体分布模式，并初步探讨了它们在环境中的来源和迁移规律，估算了这三类污染物在莱州湾表层沉积物中的储量，初步评估了莱州湾沿岸的工业排放与人类活动对海洋生态环境的影响。 莱州湾海洋和河流沉积物PCNs的含量分别为65-470 pg/g dw，52-5100 pg/g dw，平均值分别为260 pg/g dw，1100 pg/g dw。莱州湾沉积物中PCNs的含量较低，与发达国家的背景值相当，主要河流沉积物与其他地区的近海、海湾、湖泊沉积物的含量相当。该区域的PCNs主要以5-Cl和6-Cl为主，为工业来源，主要受化工行业的影响。石化工厂热过程产生的低氯组分可能也是该区域PCNs的一个重要来源。莱州湾的PCNs主要来自水体颗粒的输入，而大气沉降来源的贡献不明显。 河流沉积物ΣPBDEs（不包括BDE-209）的含量分别为0.01- 53 ng/g dw，BDE-209的含量为0.74- 280 ng/g dw，平均值分别为4.4 ng/g dw，51 ng/g dw。在组成上，BDE-209占绝对优势，比低溴代BDEs高1-2个数量级，这是由于我国市场上十溴联苯醚是最主要的溴代阻燃剂。ΣPBDEs与亚洲一些地区含量相当，比北美和欧洲一些地区要低；BDE-209含量含量高出北美和欧洲一些地区，处于较高的水平。河流沉积物中BDE-47与-99，BDE-183与-153、-154具有很好的相关性，而且这几种单体质量分数相当，说明莱州湾区域存在五溴和八溴两种工业BDE阻燃剂来源。海洋沉积物中ΣPBDEs的含量为nd- 0.66 ng/g dw，平均值为0.32 ng/g dw，处于较低水平，BDE-209的含量为0.66- 12 ng/g dw，平均值为5.1 ng/g dw，与欧美一些地区相当，主要来自水体颗粒的输入。 本研究用电子捕获低分辨质谱（ECNI-LRMS）建立了沉积物中CPs的分析方法。该方法基于ECNI质谱对SCCP的响应与其氯含量在一定范围内呈线性关系的特性，建立SCCP的总响应因子与氯含量的工作曲线，从而建立定量方法。重点改进了传统方法中由于SCCP标准品和样品中氯含量不同所造成的响应因子的差别，不再要求标准品的含氯量与样品一致，从而提高了SCCP的分析效率与方法准确性。实验发现，当SCCP的实际氯含量在51%-63%之间时，二者线性关系良好（r2>0.96）。用不同氯含量的标准参考品测试，误差为8%-43%。仪器检测限和方法检测限分别为25-400 μg/L，20 ng/g。类似地，建立了中链氯化石蜡（MCCP）的分析方法，工作曲线的实际氯含量范围为44-57%，仪器检测限40-600 μg/L，方法检测限为6 ng/g。通过对比样品与标准品的峰形特征，严格控制保留时间来辨别SCCP与MCCP，实验证明由于二者叠加导致的误差：SCCP为8%，MCCP为14%，总体来说，用该方法得到的CPs数据是可靠的。本文所使用的净化方法能实现CPs与大部分有机氯化合物的分离。 用该方法对莱州湾的沉积物的CPs进行定量，除了两个河流样品MCCP的计算含氯量低于工作曲线以外，其他样品的SCCP和MCCP的计算氯含量都在工作曲线的范围之内。河流沉积物中SCCP和MCCP的含量分别为1-1200 ng/g dw，1-3300 ng/g dw，MCCP/SCCP均值为1.2；含量分布变化较大，一些河段受到工业排放的影响，CPs浓度高出均值1-2个数量级，MCCP/SCCP值也显著高出平均值。莱州湾区域大部分河流的CPs含量与欧洲、北美和日本一些地区相当，而一些受到点源污染的河段则处于较高的水平。河流中SCCP的质量分布在不同的站位不一样，在受到点源影响的样品中，C13的质量分数明显增大，占优势地位，可能是由MCCP携带的SCCP组分所致。MCCP的质量分布在河流和海洋中没有区别，都是C14占绝对优势。从氯取代的组分来讲，所有样品都是以6-8氯取代为主。海洋沉积物中SCCP和MCCP的含量分别为3-18 ng/g dw，1-13 ng/g dw， MCCP/SCCP均值为0.68，显著低于河流沉积物；SCCP的质量分布较为一致，都是以C10和C11为主。研究发现莱州湾区域SCCP与MCCP来源相似，但迁移规律有的不同。海洋环境中的MCCP可能主要来自水体颗粒的输入，而溶解态输入也是海洋环境中SCCP的重要来源。 对这三类污染物在莱州湾表层沉积物中的储量估算得到PCNs、ΣPBDEs、BDE-209、SCCP和MCCP在莱州湾表层0-10 cm沉积物中的储量分别为0.20t，0.25t，3.95t，6.52t，4.30t。拥有10%的渤海海域面积的莱州湾ΣPBDEs和BDE-209的储量分别占渤海海区总量的18-23%，18-32%，远远超过渤海的平均值。

鳜鱼视觉特性及其对捕食习性适应的研究II．视网膜结构特性

鳜鱼视觉特性及其对捕食习性适应的研究ＩＩ．视网膜结构特性梁旭方（中国科学院水生生物研究所，武汉４３００７２）ＶＩＳＵＡＬＣＨＡＲＡＣＴＥＲＩＳＴＩＣＳＯＦＭＡＮＤＡＲＩＮＦＩＳＨ（ＳＩＮＩＰＥＲＣＡＣＨＵＡＴＳＩ）ＩＮＲＥＬＡＴＩＯＮＴＯＩＴＳＦＥＥ...

High-indium-content InxGa1-xAs/GaAs quantum wells with emission wavelengths above 1.25 mu m at room temperature

High-indium-content InxGa1-xAs/GaAs single/multi-quantum well (SQW/MQW) structures have been systematically investigated. By optimizing the molecular-beam epitaxy growth conditions, the critical thickness of the strained In0.475Ga0.525As/GaAs QWs is raised to 7 nm, which is much higher than the value given by the Matthews and Blakeslee model. The good crystalline quality of the strained InGaAs/GaAs MQWs is proved by x-ray rocking curves. Photoluminescence measurements show that an emission wavelength of 1.25 mum at room temperatures with narrower full width at half maximum less than 30 meV can be obtained. The strain relaxation mechanism is discussed using the Matthews-Blakeslee model. (C) 2004 American Institute of Physics.

A novel 1.3-mu m high T-0 AlGaInAs/InP strained-compensated multi-quantum well complex-coupled distributed feedback laser diode

A 1.3-mu m AlGaInAs/InP buried heterostructure (BH) stripe distributed feedback laser with a novel AlInAs/InP complex-coupled grating grown by low-pressure metalorganic chemical vapor deposition (LP-MOCVD) is proposed and demonstrated. A high characteristic temperature (T-0 = 90K between 20-80 degrees C) and temperature-insensitive slope efficiency (0.25 dB drop from 20 to 80 degrees C) in 1.3 mu m AlGaInAs/InP DFB lasers was obtained by introducing AI(Ga)InAs graded-index separate-confinement heterostructure (GRINSCH) layers and a strained-compensated (SC) multi-quantum well (MQW).

钙催化剂在生物降解脂肪族聚酯合成中的应用

生物降解高分子在环境保护以及组织工程、药物控制释放、骨固定等医药领域有着广泛的应用。特别是以聚丙交酷（PLA）、聚乙交酯（PGA）、聚。一己内酯（PCL）以及它们的共聚物为代表的化学合成生物降解高分子材料，由于具有优异的性能、可以大规模生产、成本较低等优点，得到了人们广泛的关注。作为生物医用材料，对无毒性的要求很严。而现在所用的脂肪族聚酯大都是用金属盐、金属有机化合物等作为催化剂合成出来的，不可避免残留一些催化剂所用的金属元素。研究表明，即使是已经获得美国FDA批准的，现在用得最普遍的辛酸亚锡所残留的锡也可能引起一些细胞毒性。因此对毒性小且活性高的催化剂的研究是非常有意义。钙离子对人体是没有毒性的，因而这几年已引起了人们的兴趣，但文献中报道的钙催化剂，如CaHZ等，催化活性尚不够让人满意。本文对高效的钙催化剂在生物降解脂肪族聚酯中的应用进行详细的研究，得到了一些有意义的结论：1、用EO和PO处理的有机氨钙催化剂（Ca／EO和Ca／PO）聚合了CL和LLA。发现CL聚合速度很快，M／I=650时70℃反应3h后收率已达到90％以上，LLA的聚合速度比CL要慢，M／I=650、70℃反应10h后收率才达到90％以上。以上聚合反应有明显的活性聚合的特点：反应初期Mv和收率和聚合时间呈线性关系；Mv在一定范围内和M／I成线性关系。2、用红外、原子吸收和核磁共振等分析手段阐明了有机氨钙催化剂的结构：结构，而且这两个催化剂的活性中心分别是均是Ca-O键。CL和LLA的开环聚合可能是以配位一插入的机理进行的。3、用C。／PO催化剂聚合LLA时有一定程度的消旋化反应发生，曳NMR研究表明相当于88％的LLA和12％外消旋以共聚。提高反应温度到110℃时比旋光度只有-125℃说明消旋化反应比较严重。4、用C。／PO催化剂先聚合CL再聚合LLA的方法合成了PCL-PLA两嵌段共聚物，并用泊NMR，13C NMR，GPC，DSC，WAXD进行了表征。其绝对和相对分子量可以通过M／I和投料比进行控制。定量碳谱图表明有较严重的消旋化反应发生，相当于84％的LLA和16％外消旋LA共聚。DSC和似XD分析表明，PLA段的分子量小时PLA段不结晶，当PLA段的分子量达到一定程度（3000以上）后PCL一PLA嵌段共聚物有相分离现象发生。5、以各种分子量的PEG为引发剂用氨钙催化剂和开环聚合CL，合成了一系列PCL-PEG-PCL三嵌段共聚物，并用妞NMR，laCNMR，GPC，DSC，做XD进行了表征。聚合物的结构可以通过改变PEG的分子量和CL／PEG投料比来调整。从DSC和wAXD分析可以得出以下几个结论：PCL-PEG-PCL嵌段共聚物有相分离现象发生，形成PCL和PEG微相区域；PEG段的结晶行为受先结晶的PCL段的影响；PCL段的分子量越大PEG段的Tc和Tm越低，其结晶度越低。6、以各种分子量的PEG为引发剂用氨钙催化剂80℃下开环聚合LLA24小时，合成了一系列PLA-PEG-PLA三嵌段共聚物，和别的催化剂比起来温度低得多，反应时间也短得多。可以通过改变PEG的分子量和CL／PEG投料比来调整聚合物的结构。DSC和WAXD分析表明，PLA-PEG-PLA三嵌段共聚物中PEG段的结晶能力受PLA段的影响非常大：当PEG段的分子量很小时（如1000）很难结晶；即使当PEG段的分子量较大时如果PLA段的分子量达到一定程度时PEG段同样也不结晶；而且PLA段的结晶行为受本身分子量的影响比较大，其Tc和伽随着分子量增加有较大的提高。7、合成了MPEG-PLA两嵌段共聚物，发现合成PLA段的分子量大的聚合物比较困难，MPEG-PCL两嵌段共聚物很难合成。DsC和WAXD分析表明，PLA段对MPEG段结晶有一定程度的影响，但是比三嵌段共聚物的影响要小得多。8、用荧光光谱和IHNMR研究了上面合成出的几个样品的胶束行为。发现cmc由大到小的顺序为MPEG（5000）-PLA（5100），PLA（3050）-PEG（4600）-PLA（3050），PCL（2270）-PEG（5000）-PCL（2270），PCL（4600）-PEG（4600）-PCL（4600）。PCL-PEG-PCL三嵌段共聚物在水中形成了具有核一壳结构的胶束。9、以苯甲醇处理的有机氨钙催化剂开环聚合了CL。泊NMR谱图表明得到的聚合物具有苯端基。这一结果为用硝苯基乙醇代替苯甲醇制备催化剂，然后开环聚合CL或LA得到硝基苯端基的脂肪族聚酯打下了实验基础。

Study of semicrystalline-amorphous diblock copolymers .1. Microphase separation, glass transition and crystallization of tetrahydrofuran methyl methacrylate diblock copolymers

The microphase separation, glass transition and crystallization of two series of tetrahydrofuran-methyl methacrylate diblock copolymers (PTHF-b-PMMA), one with a given PTHF block of M(n) = 5100 and the other with a given PTHF block of (M) over bar(n) = 7000, were studied in this present work. In the case of solution-cast materials, the microphase separation of the copolymer takes place first, with crystallization then gradually starting in the formed PTHF microphase. The T-g of the PMMA microphase shows a strong dependence on the molecular weight of the PMMA block, while the T-g of the PTHF microphase shows a strong dependence on the copolymer composition. The non-isothermal crystallization temperature (T-c) of the diblock copolymer decreases rapidly and continuously with the increase in the amorphous PMMA weight fraction; the lowest T-c of the copolymer is ca. 35 K lower than the T-c of the PTHF homopolymer. There also exists a T-c dependence on the molecular weight of the PTHF block. In addition, when the major component of the copolymer is PMMA, a strong dependence of the crystallizability of the copolymer on the molecular weight of the PTHF block is observed; the higher the molecular weight, then the stronger its crystallizability. The melting temperature of the block copolymer is dependent on the copolymer composition and the molecular weight of its crystallizable block. Copyright (C) 1996 Elsevier Science Ltd.

A Holocene paleotemperature record based on radiolaria from the northern Okinawa Trough (East China Sea)

Using a radiolarian-based transfer function, mean annual sea surface temperature (SST) and seasonal temperature range are reconstructed through the last 10,500yrs in the northern Okinawa Trough. Down-core SST estimates reveal that throughout the Holocene the changes of mean annual SST display a three-step trend: (i) an early Holocene continuous warming between 10,500 and 8500yr BP which ends up with a abrupt cooling at about 8200yr BP; (ii) a relatively stable middle Holocene with high SST that lasted until 3200yr BP; and (iii) a late-Holocene distinct SST decline between 3200 and 500yr BP. This pattern is in agreement with the ice core and terrestrial paleoclimatic records in the Chinese continent and other regions of the world. Five cooling events with abrupt mean annual SST drops, which occur at similar to 300-600, 1400, 3100, 4600-5100 and 8200yr BP, are recognized during the last 10,500yrs. Comparison of our results with records of GISP2 ice core and marine sediment in North Atlantic region suggests these cooling events are strongly coupled, which implies a possible significant climatic correlation between high- and low-latitude areas. (C) 2007 Elsevier Ltd and INQUA. All rights reserved.