Surface Tension and Its Temperature Coefficient of Molten Tin Determined with the Sessile Drop Method at Different Oxygen Partial Pressures

The surface tension of molten tin has been determined by the sessile drop method at The surface tension of molten tin has been determined by the sessile drop method at temperatures ranging from 523 to 1033 K and in the oxygen partial pressure (P-O2) range from 2.85 x 10(-19) to 8.56 x 10(-6) MPa, and its dependence on temperature and oxygen partial pressure has been analyzed. At P-O2 = 2.85 x 10(-19) and 1.06 x 10(-15) MPa, the surface tension decreases linearly with the increase of temperature and its temperature coefficients are -0.151 and -0.094 mNm(-1) K-1, respectively. However, at high P-O2 (3.17 x 10(-10), 8.56 x 10(-6) MPa), the surface tension increases with the temperature near the melting point (505 K) and decreases above 723 K. The surface tension decrease with increasing P-O2 is much larger near the melting point than at temperatures above 823 K. The contact angle between the molten tin and the alumina substrate is 158-173degrees, and the wettability is poor.

Characterization of the Fracture Work for Ductile Film Undergoing the Micro-Scratch

The interface adhesion strength (or interface toughness) of a thin film/substrate system is often assessed by the micro-scratch test. For a brittle film material, the interface adhesion strength is easily obtained through measuring the scratch driving forces. However, to measure the interface adhesion strength (or interface toughness) for a metal thin film material (the ductile material) by the microscratch test is very difficult, because intense plastic deformation is involved and the problem is a three-dimensional elastic-plastic one. In the present research, using a double-cohesive zone model, the failure characteristics of the thin film/substrate system can be described and further simulated. For a steady-state scratching process, a three-dimensional elastic-plastic finite element method based on the double cohesive zone model is developed and adopted, and the steady-state fracture work of the total system is calculated. The parameter relations between the horizontal driving forces (or energy release rate of the scratching process) and the separation strength of thin film/substrate interface, and the material shear strength, as well as the material parameters are developed. Furthermore, a scratch experiment for the Al/Si film/substrate system is carried out and the failure mechanisms are explored. Finally, the prediction results are applied to a scratch experiment for the Pt/NiO material system given in the literature.

瓦斯煤尘爆炸火焰光谱的实验研究

本文概述了瓦斯煤尘爆炸火焰光谱实验研究的重要性,我们在弱爆炸和探测器小视场角的条件下,利用自己研制的多波道仪,在一端开口的Φ200cm×2900cm大型管道里,得到了CH4、空气和煤尘的混合物在不同状态下,特征波长λ等于0.8875、1.000、1.505、2.801和4.346微米(μ)的绝对辐射强度及其有关的变化规律,对结果进行了分析讨论,并与国外实验结果进行了对比,根据测量λ=4.346μ绝对辐射强度和我们选择的黑体辐射模型,获得了爆炸火焰的温度,该项研究不仅在工业中具有重要意义,而且对燃烧和化学动力学的研究也具有参考价值。

Principles of flow field diagnostics by laser-induced biacetyl phosphorescence

A new method for measuring the density, temperature and velocity of N2 gas flow by laser induced biacetyl phosphorescence is proposed. The characteristics of the laser induced phosphorescence of biacetyl mixed with N2 are investigated both in static gas and in one-dimensional flow along a pipe with constant cross section. The theoretical and experimental investigations show that the temperature and density of N2 gas flow could be measured by observing the phosphorescence lifetime and initial intensity of biacetyl triplet (3Au) respectively. The velocity could be measured by observing the time-of-flight of the phosphorescent gas after pulsed laser excitation. The prospect of this method is also discussed.

Effect of cerium oxide on the precipitation of silver nanoparticles in femtosecond laser irradiated silicate glass

We investigated the effect of cerium oxide on the precipitation of Ag nanoparticles in silicate glass via a femtosecond laser irradiation and successive annealing. Absorption spectra show that Ce3+ ions may absorb part of the laser energy via multiphoton absorption and release free electrons, resulting in an increase of the concentration of Ag atoms and a decrease of the concentration of hole-trapped color centers, which influence precipitation of the Ag nanoparticles. In addition, we found that the formed Ag-0 may reduce Ce4+ ions to Ce3+ ions during the annealing process, which inhibits the growth of the Ag nanoparticles.

A novel method to design flexible URAs

Aperture patterns play a vital role in coded aperture imaging ( CAI) applications. In recent years, many approaches were presented to design optimum or near-optimum aperture patterns. Uniformly redundant arrays (URAs) are, undoubtedly, the most successful for constant sidelobe of their periodic autocorrelation function. Unfortunately, the existing methods can only be used to design URAs with a limited number of array sizes and fixed autocorrelation sidelobe-to-peak ratios. In this paper, we present a novel method to design more flexible URAs. Our approach is based on a searching program driven by DIRECT, a global optimization algorithm. We transform the design question to a mathematical model, based on the DIRECT algorithm, which is advantageous for computer implementation. By changing determinative conditions, we obtain two kinds of types of URAs, including the filled URAs which can be constructed by existing methods and the sparse URAs which have never been mentioned by other authors as far as we know. Finally, we carry out an experiment to demonstrate the imaging performance of the sparse URAs.

Nd3+螯合物的含氢有机溶液光谱性能研究

Tris-thenoyltrifluroacetonate of Nd3+ has been prepared and dissolved in DMF solation with very high concentration, and the contained hydrogen has not been substituted by deuterium. The absorption spectrum, emission spectrum, and fluorescence lifetime of the solution were measured. Very obvious characteristic fluorescence peaks were observed at 898 and 1058 nm. Based on Judd-Ofelt theory, three intensity parameters were obtained: Omega(2) = 4.9 x 10(-20) cm(2), Omega(4) = 5.1 x 10(-20) cm(2) and Omega(6) = 2.5 x 10(-20) cm(2). Line strengths S-cal, oscillator strengths f(cal), radiative transition probabilities A(ed), radiative lifetimes tau(r) and branch ratios beta were calculated too. The measured lifetime tau of 1058 nm peak is 460 mu s, and that of 898 nm 505 mu s. Comparison between theoretically computed radiative lifetime tau(r)(682 mu s) and the measured lifetime indicates that the non-radiative transition probability of the solution is very low and the fluorescence quantum efficiency very high. High values of three intensity parameters prove the high asymmetric surroundings of Nd3+, which is important for Nd3+ to absorb the excitation energy. Spectropic quality factor Omega(4)/Omega(6) > 1 makes radiation at 898 nm stronger than at 1058 nm.

胡萝卜素β-和ε-环化酶及辣椒红/辣椒玉红合酶基因的分离及特性研究

利用3’和5' RACE、Uneven PCR等技术成功地从胡萝卜肉质根中分离了茄红素β-环化酶、茄红素ε．环化酶和辣椒红／辣椒玉红素合酶cDNA以及茄红素β一环化酶基因5’端上游的部分序列，并研究了它们在胡萝卜肉质根中的表达模式，对胡萝卜中类胡萝卜素代谢和积累的分子机制进行了探讨。 胡萝卜茄红素β--环化酶cDNA（DCLYC1）长2089bp，包含一个1515bp的开放阅读框架，所编码蛋白长505个氨基酸，其一级结构与番茄、烟草和辣椒等植物的茄红素β--环化酶高度同源。与农杆菌和夏噬孢欧文氏菌等微生物的茄红素环化酶相似性较差，但相互间有3个短小的同源区，且蛋白疏水模式也十分相似。茄红素β--环化酶在胡萝卜肉质根中的表达受品种和组织特异性的调控。在紫色的富含茄红素的“齐头红”胡萝卜肉质根中该基因的表达受到了强烈的抑制，相反，在橙色的富含β--和α--胡萝卜素的“CA201”胡萝卜肉质根中表达十分活跃。茄红素β--环化酶和八氢番茄红素合酶基因的表达在肉质根的韧皮部和木质部之间存在差异，在韧皮部中的表达强于木质部。类胡萝卜素生物合成基因的差异表达是造成不同胡萝卜品种和组织中积累的类胡萝卜素的种类和含量不同的原因。 对紫色品种和橙色品种的茄红素β--环化酶基因组DNA的PCR分析表明两者的基因组中均存在茄红素β一环化酶基因。为了探明茄红素β--环化酶基因在不同胡萝卜品种中差异表达的原因，利用Uneven pCR从胡萝卜基因组DNA中分离克隆了茄红素β--环化酶基因5’端上游部分序列。该DNA片段长1.7kb，3’端286bp区域与DCLYC1的5’端序列交叉重叠，在GenBank中没有找到相似的序列。在1294bp-1336bp位置串连着3个TATA盒，结构十分特殊，在TATA盒上游大约700bβ位置有2个CAAT盒。瞬间表达实验证明它具有启动子活性，可以指导GUS基因在胡萝卜肉质根、叶片和茎等组织中表达。然而，其表达模式却与茄红素B．环化酶基因的Northern杂交结果不同，主要在韧皮部和木质部交界的分生组织中表达，同时在紫色胡萝卜肉质根中其表达并没有受到抑制。这一片段可能还不是完整的胡萝卜茄红素β--环化酶基因启动子，缺少了调控基因进行品种和组织特异性表达的部分序列元件。因此，分离更长的胡萝卜茄红素环化酶基因5’端上游序列，将有助于揭示茄红素β一环化酶基因呈品种和组织特异性表达的分子机制。 所分离的胡萝卜辣椒红／辣椒玉红素合酶cDNA (DCCCS)长1744bp，包含一个长1476bp的开放阅读框架，所编码蛋白长492个氨基酸。与辣椒和柑桔CCS的氨基酸序列同源性分别为为76.6%和75.3%，与DCLYC1等其它植物茄红素β--环化酶的氨基酸序列同源性为63.9-67.4%。DCCCS的表达模式在两个不同颜色的品种之间十分相似，在肉质根韧皮部中强烈表达，而在木质部中表达明显受到了抑制。由于CCS与LYC-B高度同源，有人认为CCS可能具有茄红素环化酶活性，然而本研究结果表明，DCCCS虽然在紫色的齐头红胡萝卜肉质根韧皮部中强烈表达，却没有影响细胞中积累大量的茄红素，因此DCCCS即使具有茄红素环化酶作用，其活性也是极低的。 分离到的胡萝卜茄红素ε--环化酶cDNA片段(DCL YC-E)长1264bp，包含了完整的3’端，5’端尚不完整。按照引物LYCP1上的阅读框架进行翻译得到长385个氨基酸的肽链与莴苣、番茄和拟南芥LYC-E肽链相应区域的氨基酸序列高度同源，达80.5%以上，其中与莴苣茄红素ε--环化酶最为接近。与拟南芥茄红素ε--环化酶第448位基团和莴苣茄红素ε--环化酶第457位基团对应的氨基酸基团为H。这一基团是一个分子开关，决定茄红素ε--环化酶是催化茄红素的一端还是两端形成ε--环，因此，胡萝卜茄红素ε--环化酶可能与莴苣茄红素ε--环化酶具有相同的功能，即可以催化对称的线性茄红素的两端均形成ε--环，生成双ε--环胡萝卜素。DCLYC-E在胡萝卜肉质根中表达模式与DCLYCI不同，在紫色品种齐头红肉质根韧皮部中表达十分强烈，没有受到抑制，而且明显强于木质部;在橙色品种CA201中DCLYCE的表达模式与DCLYCI相似，韧皮部中表达强，而木质部中相对弱得多。DCL YC-E的表达模式在所测试品种间没有差异。在富含茄红素的齐头红胡萝卜肉质根中DCL YC-E强烈表达，可见它并没有将茄红素大量转化为双ε--环胡萝卜素，因此该酶的功能和活性有待进一步研究。