用于硅多条阵列探测器的48路前置电荷灵敏放大器的研制

介绍了一套用于硅多条阵列探测器中的高密度多通道电荷灵敏放大器的研制和阵列探测器电子学的发展现状和工作原理,提出了设计原则和设计思路,特别介绍了一个新开发的用于硅多条探测器中的48路电荷灵敏前置放大器的设计和实际测量结果。它具有低成本、高密度的特点,好于1%的能量分辨和良好的长期稳定性。

Living polymerization of 1,3-butadiene by a Ziegler-Natta type catalyst composed of iron(III) 2-ethylhexanoate, triisobutylaluminum and diethyl phosphite

Living characteristics of facilely prepared Ziegler-Natta type catalyst system consisting of iron(III) 2-ethylhexanoate, triisobutylaluminum and diethyl phosphite have been found in the polymerization of 1,3-butadiene in hexane at 40 degrees C. The characteristics have been well demonstrated by: a first-order kinetics with respect to monomer conversion, a narrow molecular weight distribution (M-w/M-n = 1.48-1.52) of polybutadiene in the entire range of polymerization conversion and a good linearity between M-n and the yield of polymer. Feasible post-polymerization of 1,3-butadiene and block co-polymerization of 1,3-butadiene and isoprene further support the living natures of the catalyst bestowed with.

DICHLORO(ETA(5)-CYCLOPENTADIENYL)([1-(4-METHOXYPHENYL)CYCLOHEXYL]-ETA(5)-CYCLOPENTADIENYL)TITANIUM(IV)

The title molecule, [TiCl2(C5H5)(C18H21O)], has a pseudotetrahedral bent metallocene structure in which the cyclopentadienyl ring is symmetrically bonded to Ti [range of Ti-C distances 2.36(1)-2.41(1)Angstrom], but the substituted cyclopentadienyl ring adopts asymmetrical bonding [Ti-C 2.33(1)-2.48(1)Angstrom] due to the interaction of the large substituent with the Cl(2) atom. The angle C(11)-C(1)-C(21) is 111.1(8)degrees with the large substituent occupying a cis position with respect to the substituted ring.

Relationship between strain localization and catastrophic rupture

In order to explore a prior warning to catastrophic rupture of heterogeneous media, like rocks, the present study investigates the relationship between surface strain localization and catastrophic rupture. Instrumented observations on the evolution of surface strain field and the catastrophic rupture of a rock under uniaxial compression were carried out. It is found that the evolution of surface strain field displays two phases: at the early stage, the strain field keeps nearly uniform with weak fluctuations increasing slowly; but at the stage prior to catastrophic rupture, a certain accelerating localization develops and a localized zone emerges. Based on the measurements, an analysis was performed with local mean-field approximation. More importantly, it is found that the scale of localized zone is closely related to the catastrophic rupture strain and the rupture strain can be calculated in accord with the local-mean-field model satisfactorily. This provides a possible clue to the forecast of catastrophic rupture. (c) 2007 Elsevier Ltd. All rights reserved.

激波风洞中三角翼体模型的大攻角气动力测量和局部方法的应用

在激波管风洞中,模型自由飞方法测量了两种不同迎风面三角翼体模型的大攻角气动力。应用局部方法以一种迎风面外形的实验结果为依据,估算了另一迎风面外形的气动特性,结果与实验值吻合较好。另外,本文还进一步估算了航天飞机外形的气动特性,与美国的 CALSPAN 公司48英寸(1.2米)激波风洞中的实验值相比,结果也令人满意。从而表明,局部方法和实验相结合。用于简捷快速估算任意外形的高超声速气动特性是一有效的工程预示方法。

The effects of surface tension on the elastic properties of nano structures

In the absence of external loading, surface tension will induce a residual stress field in the bulk of nano structures. However, in the prediction of mechanical properties of nano structures, the elastic response of the bulk is usually described by classical Hooke’s law, in which the aforementioned residual stress was neglected in the existing literatures. The present paper investigates the influences of surface tension and the residual stress in the bulk induced by the surface tension on the elastic properties of nano structures. We firstly present the surface elasticity in the Lagrangian and the Eulerian descriptions and point out that even in the case of infinitesimal deformations the reference and the current configurations should be discriminated; otherwise the out-plane terms of surface displacement gradient, associated with the surface tension, may sometimes be overlooked in the Eulerian descriptions, particularly for curved and rotated surfaces. Then, the residual stress in the bulk is studied through the non-classical boundary conditions and used to construct the linear elastic constitutive relations for the bulk material. Finally, these relations are adopted to analyze the size-dependent properties of pure bending of Al nanowires. The present results show that surface tension will considerably affect the effective Young’s modulus of Al nanowires, which decrease with either the decrease of nanowires thickness or the increase of the aspect ratio.

The growth of gamma-LiAlO2 layer with a highly-preferred orientation on (0001) sapphire

Using vapor transport equilibration (VTE) technique we succeeded in the fabrication of single-phase gamma-LiAlO2 layer on (0001) sapphire substrate. X-ray diffraction indicated that the as-fabricated layer was highly textured with [100] orientation at proper VTE treatment temperature range from 1050 degrees C to 1100 degrees C. The main factors affecting the quality of the gamma-LiAlO2 layer were investigated by SEM and transmission spectra. These results reveal the possibility of fabricating gamma-LiAlO2 (100)//sapphire (0001) composite substrate for GaN-based epitaxial film by VTE.

Birefringent non-polarizing thin film design

In this paper, 2 X 2 characteristic matrices of uniaxially anisotropic thin film for extraordinary and ordinary wave are deduced at oblique incidence. Furthermore, the reflectance and transmittance of thin films are calculated separately for two polarizations, which provide a new concept for designing non-polarizing thin films at oblique incidence. Besides, using the multilayer birefringent thin films, non-polarizing designs, such as beam splitter thin film at single wavelength, edge filter and antireflection thin film over visible spectral region are obtained at oblique incidence.

Optical properties and microstructure of Ta2O5 biaxial film

This study investigates the optical properties and microstructure of Ta2O5 film deposited with the glancing angle deposition technique. The tilted nanocolumn microstructure, examined with scanning electron microscopy, induces the optical anisotropy of thin film. The optical properties of thin film are characterized with an inverse synthesis method. Based on the Cauchy model, the dispersion equations of optical constants of film are determined from the transmittance spectra measured at normal and oblique incidence over 400-800 nm. The starting values derived with an envelope method quicken the optimization process greatly. The dispersion of the principal indices N-1, N-2, and N-3 and the thickness d of thin film are presented statistically. A good agreement between the measured optical properties and theoretical calculation is obtained, which validates the model established for thin film produced by glancing angle deposition. (C) 2008 Optical Society of America

植物对光环境的适应性研究—富贵草对模拟光斑的光合响应——银衫对不同光环境的适应性——大叶黄杨叶片内部光能利用梯度

本文研究了富贵草对模拟光斑的光合响应、银杉对光的适应性以及大叶黄杨叶片内部光能利用梯度三个方面的问题。 1)研制了用于林内光环境调查和研究的光量子计组件。 关键词：光量子计，A/D板 2)以亚热带常绿阔叶林下一种常见的灌木富贵草为研究对象，利用气体交换和叶绿素荧光技术研究了其对模拟光斑的光合响应。在同样辐射通量（非光抑制）的情况下，光合诱导过程中光斑可以提高富贵草对光斑的利用能力（光斑诱导的碳同化量可高出对照48%）。叶绿素荧光测量结果表明：1）光斑与光斑之间的暗期发生了qN弛豫过程;2）暗期之后的光期光化学能量转换效率提高。强光光斑簇可以诱导富贵草光抑制的产生，但程度较连续光低。 关键词：模拟光斑， 叶绿素荧光， 光诱导过程 3)用高效液相色谱(HPLC)和77K低温荧光发射光谱技术来研究快速诱导组分发生的时间内光斑所导致NPQ (qN)降低的生理原因。在非光抑制条件下，光斑造成的NPQ (qN)降低的生理原因包括叶黄素循环的变化及LHCIIs聚集态的变化;此外低温荧光数据还显示光斑导致的PSII/PSI荧光产量比率要高于连续光，说明光斑导致植物对于光的利用增加。以上结果说明模拟光斑诱导了富贵草内囊体膜较低水平的能态。 关键词：模拟光斑，叶黄素，聚集态 4)用气体交换等技术测定了部分银杉幼树的生理生态指标，用鱼眼镜头测定了所测叶片的林冠开度(OP)。研究了沿林冠开度梯度的银杉幼树对光的适应性。银杉幼树在林窗边缘表现出较好的适应性，包括高的ISG（综合地上部分茎生长），高的HG（当年生树高生长速率），较高的LMA（单位叶片面积干物质重），较高的Pns（单位叶片干物质水平的净光合速率），高的单位叶片的碳同化速率，较高的截获光的单位叶片的叶面积等等，可以初步确定银杉属于Gap树种：在所测定的范围内（0. 00139%-0. 0109%）TN（土壤总氮量）明显不如OP对银杉幼树生长的影响大;综合的生态可塑性指标必须考虑具体的实验地情况、选取合适的形态学和生理学的因子、并结合多个相似生长环境下的树种来进行考虑。 关键词：林冠开度，生理生态指标，生态可塑性 5)分析了湖南八面山的银杉的某些光合特性，并比较了极郁闭（ OP<4%）情况下银杉当年生叶片与大树顶端枝条(OP>30%)当年生叶片之间光合特性上的差异。极郁闭情况下银杉叶片生长出现黄化现象，但银杉幼苗又不耐强光。银杉幼苗一天的光合动态变化表明，银杉最大光合速率在早晨8:00左右，当光照超过光饱和点时，净光合速率迅速下降，其后略有回升，呈不太典型的双峰模式。气孔关闭与净光合速率的下降有密切的关系。早晨8:00到11:00间叶黄素循环运转，对光合系统起到一定保护作用。 关键词： 银杉，色素分析，光合作用 6)采用一种新方法来测量大叶黄杨叶片内部的绝对光能利用效率梯度的曲线。该方法基于光声光谱的深度分析(Depth-Analysis)理论，并结合了光纤微探测器的叶片光梯度测量结果。日本小檗(Berberis thunbergii DC.)叶片的光声光谱扫描显示了深度分析的精确性。实验结果表明：叶片内部利用光能效率最低处在栅栏组织和海棉组织之间（入射光能的0.026%-660nm红光）;越靠近叶片的上表皮和下表皮，趋势显示叶片组织利用光能效率有上升的趋势(分别为0.092%，0.036%)。因此，不同叶肉组织绝对光能利用效率是不同的，该实验结果直接证实了Han &Vogelmann 1999b所提出的假设。 关键词： PA深度分析 叶片内部的光梯度 光化学损失 光吸收梯度