Superluminal radio source PKS 0420-014

The very long baseline interferometry result of a superluminal radio source PKS 0420-014 at 5 GHz with Shanghai (China), Urumqi (China), Note (Italy), and HartRAO (South Africa) telescopes is presented. Proper motions of the relativistic jet components in the source are calculated. Based on the Self-Compton emission in a uniform spherical model, the beaming parameters of the source are estimated. The results show that PKS 0420-014 has a high Doppler factor of 9.3, a Lorentz factor of 6.5, and a small angle of 5.5 degrees to the line of sight.

部分重力条件下气液两相流型研究

本文分析了"和平号"空间站气液两相流实验中获得的部分重力(0.1 g和0.014 g)条件下的流型特征及其相互转换条件,并将其和常重力与微重力两相流研究中较常用的流型转换模型的预测结果进行了比较.

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Two-dimensional ZnO nanowall networks were grown on ZnO-coated silicon by thermal evaporation at low temperature without catalysts or additives. All of the results from scanning electronic spectroscope, X-ray diffraction and Raman scattering confirmed that the ZnO nanowalls were vertically aligned and c-axis oriented. The room-temperature photoluminescence spectra showed a dominated UV peak at 378 nm, and a much suppressed orange emission centered at similar to 590 nm. This demonstrates fairly good crystal quality and optical properties of the product. A possible three-step, zinc vapor-controlled process was proposed to explain the growth of well-aligned ZnO nanowall networks. The pre-coated ZnO template layer plays a key role during the synthesis process, which guides the growth direction of the synthesized products. (C) 2007 Elsevier B.V. All rights reserved.

闭合水平环状日珥的磁流体静力学平衡

对太阳进行的H_α单色光观测有时会看到水平环状日珥。本文着重讨论了这种等离子体环的静力学平衡。对于这种轴对称和闭场条件的情形,求得磁场和密度的解析解。本文的结论表明,在不同的重力场和线性无力因子α的影响下,磁面形状和热力学参量的分布会有很大的变化。

高频感应等离子体动力学及其应用

<正> 高频感应等离子体技术是近十多年发展起来的一门新技术,由于它具有无电极污染,弧区大,温度均匀,能提供纯净热源,工质不受限制等特点,在化工、冶金等工业和各个科学技术领域中有着潜在的应用前景.因为过去对能够稳定并控制热等离子体流的某些方法和装置,以及对高频放电理论,等离子体动力学进行了卓有成效的研究,所以促使这个新方向得

在强激光下Ge平行板的动态F-P干涉效应

实验表明,在连续CO_2激光辐照下,Ge平行板透射光强度随时间呈准周期性的变化。基于平行平面板的多光束干涉理论,并考虑激光引起的温升对Ge片折射率和厚度的影响,得到的计算结果与实验相符合。这说明平行平面Ge在高功率连续CO_2激光作用下因折射率和厚度随温度的变化而具有一种动态的法布里-珀罗干涉效应。

广义WKB方法及其对浅水波问题的应用

本文首先指出WKB方法可适用于更广泛的一类方程,并把它应用于线性化浅水波方程。对浅水波焦散区的非线性情形,用广义WKB方法进行了讨论,把文献[4]的结果推广到一般弯曲焦散线的情形。

K_Ⅰ,K_Ⅱ复合型裂纹的脆性断裂

本文用三点弯曲和四点弯曲试样,在K_Ⅱ/K_Ⅰ=0—14的范围内,对GC-4超高强度钢、30Cr2MoV中强度转子钢和稀土球墨铸铁进行了线弹性平面应变复合型脆断试验。结果表明:复合型裂纹的脆断开裂方向与现有的三种复合型理论符合较好;但是,复合型裂纹扩展阻力随K_Ⅱ/K_Ⅰ比值增加而增大,与现有复合型理论差别较大。本文从塑性区的形状、大小和裂纹顶端在开裂方向的应力状态等方面对此问题进行了分析并指出,现有理论关于复合型裂纹扩展阻力与变形特征无关的假设,对于具有一定塑性变形能力的金属材料,是不合适的。文章还对简单且偏于安全的处理复合型问题的工程分析方法作了讨论。

弱粘性流体中垂直激励表面波的阻尼效应

在竖直振动的圆柱形容器中，将Navier-Stokes方程线性化，利用两时间尺度奇异摄动展开法研究了弱粘性流体的单一自由面驻波运动．整个流场被分为外部势流区和内部边界层区两部分，对两部分区域分别求解，得到包含阻尼项和外驱动影响的线性振幅方程．利用稳定性分析，得到形成稳定表面波的条件，给出了临界曲线．此外，还获得了阻尼系数的解析表达式．最后，将线性阻尼加到理想流体条件下所得到的色散关系中对其进行修正，理论结果证明修正后的驱动频率更加接近实验的结果．通过计算发现，当驱动的频率较低时，流体的粘性对表面波模式选择有重要影响，而表面张力的影响不明显；但当驱动频率较高时，流体的表面张力起主要作用，而流体的粘性影响甚小．

微孔泡沫塑料力学行为的研究综述

对微孔泡沫塑料力学行为的研究文献进行了综述，简单介绍了微孔泡沫塑料的制备和表征方法，重点介绍了微孔泡沫塑料力学性能的研究工作，其中也包括作者近期在该领域的一些工作。这些工作主要讨论了微孔泡沫塑料的压缩、拉伸、冲击、疲劳和黏弹性效应。最后，给出了对该领域工作的一些讨论和展望。

Angular distribution and conversion of multi-keV L-shell X-ray sources produced from nanosecond laser irradiated thick-foil targets

An experimental study on the angular distribution and conversion of multi-keV X-ray sources produced from 2 ns-duration 527nm laser irradiated thick-foil targets on Shenguang II laser facility (SG-II) is reported. The angular distributions measured in front of the targets can be fitted with the function of f(theta) = alpha+ (1- alpha)cos(beta) theta (theta is the viewing angle relative to the target normal), where alpha = 0.41 +/- 0.014, beta = 0.77 +/- 0.04 for Ti K-shell X-ray Sources (similar to 4.75 keV for Ti K-shell), and alpha = 0.085 +/- 0.06, beta = 0.59 +/- 0.07 for Ag/Pd/Mo L-shell X-ray Sources (2-2.8 keV for Mo L-shell, 2.8-3.5 keV for Pd L-shell, and 3-3.8 keV for Ag L-shell). The isotropy of the angular-distribution of L-shell emission is worse than that of the K-shell emission at larger viewing angle (>70 degrees), due to its larger optical depth (stronger self-absorption) in the cold plasma side lobe Surrounding the central emission region, and in the central hot plasma region (emission region). There is no observable difference in the angular distributions of the L-shell X-ray emission among Ag, Pd, and Mo. The conversion efficiency of Ag/Pd/Mo L-shell X-ray sources is higher than that of the Ti K-shell X-ray sources, but the gain relative to the K-shell emission is not as high as that by using short pulse lasers. The conversion efficiency of the L-shell X-ray sources decrease, with increasing atomic numbers (or X-ray photon energy), similar to the behavior of the K-shell X-ray Source.

Neutron source from thin foil confined by two laser pulses

Neutron production from a thin deuterium-tritium (D-T) foil irradiated by two intense femtosecond laser pulses from opposite sides with zero phase difference is studied analytically and numerically. For the interaction of a laser pulse of amplitude a = 7, focal area 100 mu m(2) and areal density 4.4 x 10(18) cm(-2) with a D-T plasma foil, about 1.17 x 10(21) neutron s(-1) can be obtained, much more than from other methods. The profiles of the ion and electron densities are also calculated.

Characteristics of 980/1550 nm WDM coupler based on planar curved waveguides

A wavelength division multiplexer (WDM) for 980/1550 nm based on planar curved waveguide coupler (CWC) is proposed. Compared with conventional parallel straight waveguide coupler (SWC), this structure has more flexibility with two variable parameters of bending radius R and minimum edge-to-edge spacing do, which are the two main parameters for the splitting ratio of coupler and decrease the complexity of device design and fabrication. Based on coupled mode theory (CMT) and waveguide theory, R and do of the WDM CWC are designed to be R = 13.28 m and d(0) = 4.39 mu m. The contrast ratio (CR) and insertion loss (IL) for 980 and 1550 nm are CR1 = 24.62 dB, CR2 = 24.56 dB and IL1 = 0.014 dB, IL2 = 0.015 dB, respectively. The 3D beam propagation method (BPM) is used to verify the validity of the design result. The influence of R and d(0) variations on the device performance is analyzed. For CR > 20 dB, the variation ranges of R and d(0) should be within -0.10 to +0.44 m and -0.05 to + 0.02 mu m, respectively. (c) 2006 Elsevier GmbH. All rights reserved.