A Numerical Study for Turbulent Flow and Thermal Influence Over Inhomogenous Canopy of Roughness Elements

A large-eddy simulation with transitional structure function(TSF) subgrid model we previously proposed was performed to investigate the turbulent flow with thermal influence over an inhomogeneous canopy, which was represented as alternative large and small roughness elements. The aerodynamic and thermodynamic effects of the presence of a layer of large roughness elements were modelled by adding a drag term to the three-dimensional Navier-Stokes equations and a heat source/sink term to the scalar equation, respectively. The layer of small roughness elements was simply treated using the method as described in paper (Moeng 1984, J. Atmos Sci. 41, 2052-2062) for homogeneous rough surface. The horizontally averaged statistics such as mean vertical profiles of wind velocity, air temperature, et al., are in reasonable agreement with Gao et al.(1989, Boundary layer meteorol. 47, 349-377) field observation (homogeneous canopy). Not surprisingly, the calculated instantaneous velocity and temperature fields show that the roughness elements considerably changed the turbulent structure within the canopy. The adjustment of the mean vertical profiles of velocity and temperature was studied, which was found qualitatively comparable with Belcher et al. (2003, J Fluid Mech. 488, 369-398)'s theoretical results. The urban heat island(UHI) was investigated imposing heat source in the region of large roughness elements. An elevated inversion layer, a phenomenon often observed in the urban area (Sang et al., J Wind Eng. Ind. Aesodyn. 87, 243-258)'s was successfully simulated above the canopy. The cool island(CI) was also investigated imposing heat sink to simply model the evaporation of plant canopy. An inversion layer was found very stable and robust within the canopy.

合金材料韧性断裂的表征、孔洞成核准则和断裂模型

<正> Ⅰ.引言 韧性断裂是合金材料失效的主要形式之一。早在19世纪下半叶,有人就开始注意到金属材料的韧性断裂是通过内部颈缩而发生的。本世纪50年代,Puttick通过一系列实验和分析,提出了韧性断裂的机制是由于在材料内部的夹杂物上形成孔洞。随后,越来越多的实验事实表明,合金材料的韧性断裂是在材料里的第二相粒子(夹杂物)上形成孔洞,随后孔洞生长、汇合这样一个过程。50年代以来,位错理论的发展,电子显微镜的诞生,断裂学科

二阶非线性微分方程亚/超谐共振的一种求解方法及其应用研究

本文引用了非线性共振频率的概念,指出如何求主共振频率域及其中心。采用新的办法对单自由度非线性系统的亚/超谐共振进行了研究。作为例子讨论了Duffing方程,给出了1/7,1/5,1/2,3/5,5/3,2,5次谐波共振的结果。模拟计算机的计算结果对所给理论作了部分验证。

各向异性的悬臂梁负担均布载荷的弯曲问题

<正> 柱体是工程结构中常常遇到的结构单位。按照载荷情况的不同,主要的柱体问题有下面三类:(1)柱体的扭转问题;(2)悬臂梁在其悬空端负担一个横向载荷的问题;(3)悬臂梁负担均布载荷的问题。在各向同性的场合,前两问题首先由圣维南建立一般性的理论。第三个问题则首先由米恰耳创立一般性的理论。米恰耳将所设问题化为一个平面形变问题。在任意各向异性的场合,前两问题已由列赫尼茨基建立了一般性的理论。本文的目的在建立任意各向异性的悬臂梁负担均布载荷的一般理论。我们利用列赫尼茨基的方法和结果,将所设问题化为一个广义平面形变问题,后者的一般性的解法,亦已经由列赫尼茨基建立。

激波管双爆轰驱动段性能的数值模拟研究

采用频散可控的耗散格式(DCD),求解Euler方程和一种改进的二阶段化学反应模型,对氢氧反向-正向双爆轰驱动段激波管进行了数值模拟.计算结果表明:当辅驱动段与主驱动段初始压力比小于临界值时,Taylor波仍会出现,但波扇夹角较单一前向爆轰驱动段小,入射激波马赫数衰减率变小;当初始压力比等于临界值时,主驱动段中的Taylor波完全被消除,入射激波马赫数不再衰减.当初始压力比大于临界值时,在主驱动段中能产生过驱动爆轰波,不仅Taylor波被完全消除,而且驱动能力较单一前向爆轰驱动段强

纳米硬度技术的发展和应用

近二十年来，主要用于检测材料表面微米和亚微米尺度力学性质的纳米硬度技术发展迅速。首先，概述硬度的定义、分类及其适用范围。然后，系统地总结纳米硬度技术的发展，重要介绍纳米压痕硬度的测量原理及其影响因素，连续刚度测量原理，高分辨率的载荷位移测量原理，几种常用压头的几何形状，试样表面的准备和确定，相关的测量方法，仪器校准和显微观察等问题。通过压痕实验可获得硬度、弹性模量、断裂韧性、存储模量和损耗模量、蠕变应力指数等。最后，简要介绍纳米划痕硬度测量技术的发展和应用。

蛋白质芯片用表面改性剂的合成——蛋白质偶联剂与蛋白质非特异吸附抑制剂的合成

以巯丙基三乙氧基硅烷和单取代三聚乙二醇为原料，先把巯基转换成巯钠，把醇羟基转换成对甲苯磺酰基，利用巯钠和对甲苯磺酰基间的亲核取代反应，在温和条件下合成了标题试剂。

Fiber grating sensors for high-temperature measurement

Two fiber grating sensors for high-temperature measurements are proposed and experimentally demonstrated. The interrogation technologies of the sensor systems are all simple, low cost but effective. In the first sensor system, the sensor head is comprised of one fiber Bragg grating (FBG) and two metal rods. The lengths of the rods are different from each other. The coefficients of thermal expansion of the rods are also different from each other. The FBG will be strained by the sensor head when the temperature to be measured changes. The temperature is measured based on the wavelength-shifts of the FBG induced by the strain. In the second sensor system, a long-period fiber grating (LPG) is used as the high-temperature sensor head. The LPG is very-high-temperature stable CO2-Aaser-induced grating and has a linear function of wavelength-temperature in the range of 0 - 800 degrees C. A dynamic range of 0 - 800 degrees C and a resolution of 1 degrees C have been obtained by either the first or the second sensor system. The experimental results agree with theoretical analyses. (c) 2007 Elsevier Ltd. All rights reserved.

一种相位提取算法误差特性的分析

设计了一种新的相位提取算法，根据推导的评价函数，研究了其误差特性，与传统相位提取算法做了比较分析，其频域特性有了显著提高．分析结果证明该算法对失谐误差不敏感，高阶偶数谐波误差对结果值也不敏感，具有比较优势．仿真实验结果验证了理论预期．

Intense upconversion luminescence and effect of local environment for Tm3+/Yb3+ co-doped novel TeO2-BiCl3 glass system

We present the results of a study that uses theoretical and experimental methods to investigate the characteristics of the upconversion luminescence of Tm3+/Yb3+ codoped TeO2-BiCl3 glass system as a function of the BiCl3 fraction. These glasses are potentially important in the design of upconversion fiber lasers. Effect of local environment around Tm3+ on upconversion fluorescence intensity was analyzed by theoretical calculations. The structure and spectroscopic properties were investigated in the experiments by measuring the Raman spectra, IR transmission spectra, and absorption and fluorescence intensities at room temperature. The results indicate that blue luminescence quantum efficiency increases with increasing BiCl3 content from 10 to 60 mol%, which were interpreted by the increase of asymmetry of glass structure, decrease of phonon energy and removing of OH- groups. (c) 2005 Elsevier B.V. All rights reserved.

Ce：Lu2Si2O7闪烁晶体的结构和光谱特性

采用中频感应提拉法生长出Ce：Lu：Si2O7(Ce：LPS)晶体．通过x射线粉末衍射分析，晶体结构属单斜晶系的C21m空间群·光学显微镜下可观测到晶体的(110)解理．在室温下测试了Ce：LPS晶体的吸收光谱、激发光谱和发射光谱。结果表明，Ce：LPS晶体的吸收峰只有两个，分别位于302和349nm，且与激发峰的位置一致，归因于Ce^3+的4f^1→5d^1跃迁的特征吸收所致．发射光谱具有Ce^3+典型的双峰特征，经Gaussian多峰值拟合，带状谱是由384和407nm两个发射峰叠加而成，且后者的强度