Numerical Simulation of Nox Formation in Coal Combustion with Inlet Natural Gas Burning

A full two-fluid model of reacting gas-particle flows and coal combustion is used to simulate coal combustion with and without inlet natural gas added in the inlet. The simulation results for the case without natural gas burning is in fair agreement with the experimental results reported in references. The simulation results of different natural gas adding positions indicate that the natural gas burning can form lean oxygen combustion enviroment at the combustor inlet region and the NOz concentration is reduced. The same result can be obtained from chemical equilibrium analysis.

Surface Stress Induced By Adatoms Adsorption On Solid Surfaces

Based on the statistical thermodynamics theory, a theoretical model of adsorbate induced surface stress of adatoms adsorption on solid surface is presented. For the low coverage, the interaction between the adsorbed molecules is entirely negligible and the adsorption induced surface stress is found to be the function of the coverage and the adsorption energy change with strain. For the high coverage, the adsorbate-adsorbate interaction contributes to the adsorption-induced surface stress effectively. In the case of carbon adsorption on the Ni(100) surface, the value of 0.5 is obtained as a characteristic coverage to decide whether to take the interaction between the adsorabtes into consideration and the results also show that the adsorption induces a compressive surface stress.

The characterization of plastic flow in three different bulk metallic glass systems

Plastic deformation behaviors of Zr52.5Al10Ni10Cu15Be12.5, Mg65Cu25Gd10 and Pd43Ni10Cu27P20 bulk metallic glasses (BMGs) are studied by using the depth-sensing nanoindentation, macroindentation and uniaxial compression. The significant difference in plastic deformation behavior cannot be correlated to the Poisson's ratio or the ratio of shear modulus to bulk modulus of the three BMGs, but can be explained by the free volume model. It is shown that the nucleation of local shear band is easy and multiple shear bands can be activated in the Zr52.5Al10Ni10Cu15Be12.5 alloy, which exhibits a distinct plastic strain during uniaxial compression and less serrated flow during nanoindentation. (c) 2006 Elsevier B.V. All rights reserved.

超声速和高超声速进气道的数值模拟

本文讨论超声速和高超声速进气道的数值模拟问题,其中包括国内外对进气道问题的一些主要进展、方向和今后预研的动态,目的在于弄清流场形成的机理,为高速飞行器进气道的气动设计提供理论依据。

波射入等离子体的方式对波加热的影响

本文讨论了电子回旋波加热托卡马克等离子体问题,指出在考虑波加热时,除了要计算寻常波和非常波在等离子体内部的吸收效率外,还应计算入射电磁波从真空投射到磁化等离子休表面时,在边界处分裂成寻常波和非常波的能量分配。 数值计算结果表明,在入射角θ_i较小的情况下,当入射波的电场E~i平行入射平面时,入射波的能量主要转移为寻常波的能量,此时,寻常波的加热是有效的.当E~i垂直入射平面时,入射波的能量主要转移为非常波的能量,此时非常波的加热才是有效的。

有序熔楔和转捩

本文研究烧蚀表面上的一种尖楔状沟槽,简称熔楔。实验表明,熔楔是边界层转捩区的一种烧蚀现象;在蜂蜡和一些高温材料的球头上,熔楔排列有序,形成规则图象。在所实验的参数范围内,熔楔的条数保持在20条左右,不随来流马赫数、球头半径和烧蚀材料类型不同而改变。在分析研究熔楔内部结构和外流条件的基础上,本文提出熔楔形成机理和内外流动模型的设想,并对熔楔的形态、分布以及由它引导出菱形花纹等现象作了解释。

高频感应放电理论与特性计算方法

本文以双渠道模型为基础,考虑气体流动、对流传热、热辐射修正,利用等效温度能量平衡计算法,求出了等离子体放电特性和其他参数,并同现有文献进行了比较,能给出很好结果,而计算大大简化。本文还推导了各种边界条件下的传热计算方程,而对等离子体同振荡器的耦合、匹配、结构参数和运行参数的选择原则,以及实践经验,也作了详尽的讨论和分析。

由衰减常数确定振动弛豫速率

<正> 分子的振动弛豫过程,在高速气体动力学、化学动力学及超声的许多过程中,特别是在分子激光器中,起着重要的作用。已积累了丰富的弛豫实验数据。但是,弛豫实验中只能测得某宏观物理量的变化,如在激波管或激光荧光实验中,观察特定波长的光辐射随时间的变化,可监视相应振型的弛豫过程。这种变化除开始的短暂时期外,呈Ⅰ—

Three-dimensional finite element analysis of composites with coated spherical inclusions

A three-dimensional finite element analysis has been used to determine the internal stresses in a three-phase composite. The stresses have been determined for a variety of interphase properties, the thicknesses of the interphase and the volume fractions of particles. Young's modulus has been calculated from a knowledge of these stresses and the applied deformation. The calculations show that stress distributions in the matrix and the mechanical properties are sensitive to the interphase property in the three-phase composites. The interfacial stresses in the three-dimensional analysis are in agreement with results obtained by an axisymmetric analysis. The predicted bulk modulus in three-dimensional analysis agrees well with the theoretical solution obtained by Qui and Weng, but it presents a great divergence from that in axisymmetric analyses. An investigation indicates that this divergence may be caused by the difference in the unit cell structure between two models. A comparison of the numerically predicted bulk and shear modulus for two-phase composites with the theoretical results indicates that the three-dimensional analysis gives quite satisfactory results.

Initiation and propagation of short fatigue cracks in a weld metal

Fatigue tests were performed using a purpose designed triangular shaped specimen to investigate the initiation and propagation of short fatigue cracks in a weld metal. It was observed that short fatigue cracks evolved from slip bands and were predominantly within ferrite grains. As the test progressed, the short crack density increased with minor changes in crack length. The growth of short cracks, in the early stage resulted mainly from coalescence with other existing cracks. The mechanism of short crack behaviour is discussed.

关于科技论文写作的一点粗浅体会

科技论文写作对总结科学研究的创新发现是至关重要的。本文作者对如何撰写或写好科技论文,从论文写作的基本元素及常见问题等方面言简意赅地提出了很有意义的见解。

三峡库区奉节天池滑坡实时遥测技术应用实例

对滑坡监测的特点及国内外滑坡监测技术的发展现状进行简要的介绍,对无线实时遥测技术在滑坡监测中的应用现状做必要的综述,对KLA1型地表位移遥测系统的工作原理进行阐述,并详述阐述将遥测系统应用于三峡库区奉节天池滑坡应急监测的具体情况。KLA1型地表位移遥测系统是测量地表相对位移的监测仪器,在宜昌茅坪、重庆北碚、重庆万州枇杷坪等地已实际应用。该系统由三部分组成,分别为位移传感装置、数据采集发射模块、数据接收处理终端。在实际监测过程中,当滑体滑动时,监测点相对于固定点有线位移,这一信息由角位移传感器记录并转化为相应的电学量,电学量由无线发射模块通过GSM网络发射至远程终端,PC机作为终端通过相应的监测软件进行数据的接收及分析。通过奉节天池滑坡实测数据的分析,给出天池滑坡滑体位移随时间的变化曲线,预测此滑坡未来的发展趋势,证明监测设备的准确性、实时性,并说明此种监测技术运用于滑坡监测具有很高的实用价值。

YAG激光毛化技术进展

二十世纪八十年代，当比利时冶金研究中心(CRM)开发出CO_2激光毛化冷轧辊技术后，尝试用YAG激光进行轧辊毛化一直吸引着众多的研究者，这是因为YAG(1.06μm)激光波长比CO_2(10.6μm)激光波长短一个量级，材料对YAG激光有更高的吸收率，并用YAG激光可以聚焦到更小的光斑尺寸，同时使用电信号驱动的声光开关技术便于对毛化分布进行可设定控制。但是用传统声光调制的YAG激光虽然可以碇以很高的脉冲频率(>30kHz)，但单脉冲有量仅为10mJ左右，难以达到辊面毛化粗糙度的要求，因此人们认为YAG激光用于毛化的主要困难是脉冲能量太小。

超短激光脉冲在不同色散参量光子晶体光纤中传输的数值模拟

为了使得数值模拟更为精确, 采用广义非线性薛定谔方程(GNSE)描述超短激光脉冲在光子晶体光纤中的传输演化过程, 并利用二阶分步傅里叶方法通过求解方程, 数值计算了相同脉宽和能量的超短脉冲在不同色散参量的光子晶体光纤中非线性传输和超连续谱的产生。比较了超短脉冲在光纤不同色散区传输时, 高阶色散和非线性效应对超连续谱的产生以及对脉冲波形演化的影响。结果表明, 相对于超短脉冲中心波长位于光子晶体光纤的正常和反常色散区, 可以相应获得短波波段和长波波段的超连续谱输出, 当超短脉冲中心波长位于零色散波长点时, 通