Electropolymerized poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) film on ITO glass and its application in photovoltaic device

Poly(3,4-ethylenedioxythiopliene):poly(styrene sulfonate) (PEDOT:PSS) films have been electrochemically polymerized in situ on ITO glass substrate in boron trifluoride diethyl etherate electrolyte (BFEE). Cyclic voltammograms show good redox activity and stability of the PEDOT films. These films had been directly used to fabricate organic-inorganic hybrid solar cells with the structure of ITO/PEDOT/ZnO:MDMC-PPV/Al. The solar cells made of electrochemically polymerized films exhibit higher energy conversion efficiencies compared with that prepared by the spin-coating method, and the highest value is 0.33%. This in-situ electropolymerized method effectively simplifies fabricating procedures and may blaze a facile and economical route for producing high-efficiency solar cells.

Morphology of electrodeposited poly(3,4-ethylenedioxythiophene)/poly(4-styrene sulfonate) films

Poly(4-styrene sulfonate)-doped poly(3,4-ethylenedioxythiophene) (PEDOT/PSS) films with ring-, arrow-, and bubble-like microstructures have been electrochemically generated simply by a one-step cyclic voltammetry in an aqueous media. Influences of applied potentials and surfactant/dopant-PSS on morphology of the resulting film were investigated, and a gas bubble template mechanism has been proposed. The result confirmed a well-doping of PSS in the PEDOT film. Electrochemical property and conductivity of the micro-structured PEDOT/PSS film were investigated further. Similar preparation with potential applications in fabrication of microdevices and micro-sensors can be extended to other micro-structured conducting polymers.

Electro-assisted precipitation of electrolytes in poly(3,4-ethylenedioxythiophene) film

The electrolyte, NaBF4, can be enriched into the matrix of poly(3,4-ethylenedioxythiophene) (PEDOT) film during the p-doping potential cycling between 0.6 and -0.9 V. It has been demonstrated that this enrichment is originated from the mixed ion transfer between doping and dedoping, i.e. BF4- anion migrate into the PEDOT film during the oxidation process, the Ne cation insert into the film during the reduction process, and then, the electrolyte is accumulated into the film matrix after the multiple CV cycling. The quantitative analysis of energy-dispersive X-ray spectroscopy (EDX) confirmed the enrichment of NaBF4 in the PEDOT film.

Performance Enhancement of Polymer Light-Emitting Diodes by Using Ultrathin Fluorinated Polyimide Modifying the Surface of Poly(3,4-ethylene dioxythiophene):Poly(styrenesulfonate)

Herein, an insulating fluorinated polyimide (F-PI) is utilized as an ultrathin buffer layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in polymer light-emitting diodes to enhance the device performance. The selective solubility of F-PI in common solvents avoids typical intermixing interfacial problems during the sequential multilayer spin-coating process. Compared to the control device, the F-PI modification causes the luminous and power efficiencies of the devices to be increased by a factor of 1.1 and 4.7, respectively, along with almost 3-fold device lifetime enhancement. Photovoltaic measurement, single-hole devices, and X-ray photoelectron spectroscopy, are utilized to investigate the underlying, mechanisms, and it is found that the hole injection barrier is lowered owing to the interactions between the PEDOT:PSS and F-PI. The F-PI modified PEDOT:PSS layer demonstrates step-up ionization potential profiles from the intrinsic bulk PEDOT:PSS side toward the F-PI-modified PEDOT:PSS surface, which facilitate the hole injection.

以1-苯基-3-甲基-4-苯甲酰基代吡唑酮[5]萃取稀土和钍铀钛锆及其在分析化学中的某些应用

本文研究了以PMBP-苯萃取稀土和钍、铀、钛、锆的萃取行为。测定了La、Ce、Pr、Nd、Sm、Gd、Dy、Yb、Y、U(Ⅵ)、Ti、Th和Zr的pH_(1/2)值,计算了它们的萃取平衡常数。并介绍了近十年来作者将此萃取剂应用于铀、钍、稀土、鋰、钢铁合金及岩石中痕量稀土、钍和钙的分离和测定方面的工作。实践证明,PMOP合成简便、价格低廉、萃取能力较强,是比TTA更为优越的萃取剂。

微囊藻毒素的2-甲基-3-甲氧基-4-苯基丁酸检测方法的研究

2甲-基-3-甲氧基-4-苯基丁酸(MMPB)法是检测微囊藻毒素(Microcystins,MC)的重要方法之一。本文研究了温度、pH值、反应时间和氧化剂浓度等实验参数的影响,并在优化条件下采用气相色谱法对水中的微囊藻毒素进行检测。实验得到的最佳反应条件为:pH=9,初始反应温度2℃反应1 h,再升温至25℃反应2 h;KMnO4的初始浓度为0.0156 mol/L。本法对水溶液中的微囊藻的检出限为0.0225μg,回收率为93.5%。

Growth kinetics of 1-2 mm and 3-4 mm colonies of Nostoc sphaeroides (Cyanophyta) in outdoor culture

Nostoc sphaeroides Kutzing was cultivated in paddlewheel-driven raceway ponds and the growth kinetics of 1-2 mm and 3-4 mm colonies of N. sphaeroides was studied. The biomass productivities in 2.5 m(2) raceway ponds inoculated with 1-2 mm and 3-4 mm colonies were 5.2 and 0.25 g dry wt m(-2) stop d(-1), respectively. Furthermore, differently sized colonies showed different relative water content, total soluble carbohydrates, chlorophyll a content and density of filaments. This is the first report on mass culture of N. sphaeroides under outdoor conditions.

Highly efficient and stable organic light-emitting diodes employing MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride as hole injection layer

We report highly efficient and stable organic light-emitting diodes (OLEDs) with MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) as hole injection layer (HIL). A green OLED with structure of ITO/20 wt% MoO3: PTCDA/NPB/Alq(3)/LiF/Al shows a long lifetime of 1012 h at the initial luminance of 2000 cd/m(2), which is 1.3 times more stable than that of the device with MoO3 as HIL. The current efficiency of 4.7 cd/A and power efficiency of 3.7 lm/W at about 100 cd/m(2) have been obtained. The charge transfer complex between PTCDA and MoO3 plays a decisive role in improving the performance of OLEDs.

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮萃取~(46)Sc的研究

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂,氯仿和环己烷为稀释剂,观察了在HCl溶液46Sc的溶剂萃取行为。实验结果表明,从10-3~10-2mol/L的HCl溶液中用PMBP-氯仿(或环己烷)能有效地萃取46Sc,萃取率可达95%以上。另外,对PMBP从HCl溶液中萃取46Sc和234Th的结果也做了比较,结果表明,通过控制水溶液中HCl的浓度,能实现234Th与46Sc的分离。

1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮和磷酸三丁脂协同萃取镭的研究

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,苯为稀释剂,从pH5的水相中萃取船224Ra,发现224Ra的萃取效率非常低。若往PMBP中加入少量的磷酸三丁脂(TBP),则会极大地提高镭的萃取效率,这说明TBP对PMBP萃取镭有显著的协同萃取效应。完成了萃取时间和反萃时间对224Ra萃取效率的影响以及224Ra萃取效率与TBP量之间的依赖关系等条件实验。

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮从硝酸介质中萃取钪

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)做萃取剂研究了从HNO_3介质中痕量钪的溶剂萃取行为。发现在很低的酸度下,PMBP几乎可以定量地萃取痕量的钪。同时,也讨论了用PMBP从~(18)O离子辐照过的铀靶溶液中萃取分离钍时钪的沾污。

1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)萃取钍流程的改进

在用PMBP(1 苯基 3 甲基 4 苯甲酰基 5 吡唑啉酮 )从 14MeV中子照射过的天然U靶溶液中萃取Th流程的基础上 ,将萃取介质改为HNO3溶液 ,并将单次萃取 反萃改为两次萃取 反萃 ;在反萃溶液中加入I- 载体和NaNO2溶液 ,在Fe(OH) 3沉淀溶液中加入Br- 载体。用改进后的流程从 6 0MeV/u18O离子轰击天然U的HNO3溶液中分离Th ,从制得的Th样品的γ射线谱可以看出 ,该流程能去除绝大部分产物元素 ,特别是能完全去除溴和碘

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮从硝酸中萃取痕量钍

用1-苯基-3-甲基-4-苯甲酰基-5-吡唑啉酮(PMBP)为萃取剂,~(234)Th作示踪剂,完成了在硝酸介质中痕量钍溶剂萃取行为的研究。在~(234)Th萃取效率与酸度、萃取剂浓度、平衡时间等依赖关系的条件实验的基础上,获得了萃取钍的最佳条件。使用改进的PMBP萃取钍的流程,从~(18)O离子辐照过的铀靶中分离钍,钍样品的γ射线单谱显示绝大部分反应产物和大量铀的去除是满意的。