Natural bromophenols from the marine red alga Polysiphonia urceolata (Rhodomelaceae): Structural elucidation and DPPH radical-scavenging activity

Three new natural occurring bromophenols, 3-(3-bromo-4,5-dihydroxyphenyl)-2-(3,5-dibromo-4-hydroxyphenyl)propionic acid (1), (E)-4-(3-bromo-4,5-dihydroxyphenyl)-but-3-en-2-one (2), and (3,5-dibromo-4-hydroxyphenyl) acetic acid butyl ester (3), together with one known bromophenol, 1,2-bis(3-bromo-4,5-dihydroxyphenyl)ethane (4), were isolated and identified from the marine red alga Polysiphonia urceolata. The structures of these compounds were elucidated by extensive analysis of ID and 2D NMR and IR spectra and MS data. Each of the isolated compounds was evaluated for scavenging alpha,alpha-diphenyl-beta-picrylhydrazyl (DPPH) radical activity and all of them exhibited significant activity with IC50 values ranging from 9.67 to 21.90 mu M, compared to the positive control, a well-known antioxidant butylated hydroxytoluene (BHT), with IC50 83.84 mu M. (C) 2007 Elsevier Ltd. All rights reserved.

MOCVD生长的II-VI族化合物固溶体组分的热力学分析.2.Hg（1-x）CdxTe体系

对MOCVD生长Hg_(1-x)Cd_xTe进行了热力学分析.所用的起始原材料为Hg、DM-Cd和R_2Te.计算结果一方面表明CdTe优先并入倾向使得在通常的DAG工艺中x值非常不易控制.另一方表明即使在Hg存在的情况下,也可以沉积几平纯的CdTe,这对实现IMP工艺非常有利,计算结果还表明II/VI比对HgCdTe的组分控制起着关键性的作用.在DAG工艺中,较低的II/VI比可以改善对x值的控制能力,LMP-DAG工艺是降低II/VI比的较好途径.还计算了生长温度和反应室压力对固相组分的影响以及LMP-DAG工艺中生长温度与HgCdTe组分对最低汞分压的影响.

2-C-支链-1,6-脱水吡喃葡萄糖的开环反应及吡喃烯糖的合成研究

在糖化学合成中，1,6-脱水吡喃糖不仅是合成具有生物活性低聚糖、糖共体、抗原、抗体以及天然产物等化合物重要原料，而且还是许多具有生物活性的天然产物的结构单元。同时，它还具有[3,2,1]的双环缩醛结构，使其在糖化学合成中具有高的立体选择性和区域选择性，同时减少了C-1 和C-6 位的保护和去保护的优点。此外，环内的缩醛开环后，又可以相应地在C-1 和C-6 位进行官能团转化以及糖苷化反应。 本文报道了一种新的1,6-脱水吡喃糖的合成方法，并设计合成了2-C-支链-1,6-脱水吡喃葡萄糖1-195、1-197、1-198 以及2-C-支链-6-硫代1,6-脱水吡喃葡萄糖1-225。到目前为止，1,6-脱水糖开环并进行糖苷化反应，存在选择性较差、产率低的缺点。我们发现，在乙腈做溶剂的条件下，NiCl5 能高立体选择性高产率地催化化合物1-195、1-197、1-198 开环并与ROH、RSH 发生糖苷化反应。在NiCl5-乙腈条件下，合成了一系列2-C-支链-α-糖苷和2-C-支链-β-硫代糖苷，并对2-C-支链1,6-脱水吡喃葡萄糖的生成机理以及开环机理进行了探讨。 烯糖在糖化学合成中是重要的起始原料，从Fischer 首次合成烯糖至今，一直不断地有新的合成方法出现。但目前文献报道的方法存在所用试剂有毒、价格贵和操作繁琐等缺点。我们对Fischer-Zach 方法进行了改进， 发现Zn-NaH2PO4-H2O 和Zn-PEG600-H2O 体系都能很好地合成烯糖。该方法具有条件温和、绿色环保、操作简单的优点。在Zn-NaH2PO4 溶液或Zn-PEG600 条件下，以溴代糖为原料，高产率地合成一系列的烯糖。 The 1,6-anhydrohexopyranoses are crucial subunits of myriad bioactive nature products, as well as important syntons of carbohydrate chemistry which have been extensively used to prepare the biologically potential oligosaccharides, glycoconjugates, antibiotics, and structurally varied nature products. Their particular [3.2.1] bicyclic skeleton makes them have high regio- and stereo-control in a variety of reactions, and such structure avoids protecting hydroxyl groups at C1 and C6.Additionally, the cleavage of the internal acetal under acidic conditions could be beneficial for further transformations of functional group and glycosylation of the corresponding pyranosyl sugar at the C6 or C1 site. Herein we developed a novel approach to prepare the 1,6-anhydrohexopyranose, and synthesized the 2-C-branched-1,6-anhydrohexopyranose 1-195, 1-197, 1-198 and 2-C-branched-6-thio-1,6-anhydrohexopyranose 1-225. Until now, glycosylation of 1,6-anhydrohexopyranoses has been limited because of the low yields and low stereoselectivity. In this paper, we found that NiCl5-MeCN system could selectively cleave the ring of 1,6-anhydrohexopyranoses with alcohols and thiols at room temperature in high yields. A series of 2-C-branched-α-glycosides and 2-C-branched-β-thioglycosides have been synthesized via NiCl5-catalyzed. Furthermore, we investigated the formation and ring-opening mechanism of 2-C-acetylmethyl-1,6-anhydrohexopyranose. Glycals are significant starting material in carbohydrate chemistry. After the Fischer-Zach method for forming glucal was reported for the first time, the numerous synthetic methods for glycals have been explored. However, there are several drawbacks in the existing methods, such as the usage of very expensive and toxic reagents, intricate operation, and the influence of acid-sensitive and base-sensitive functional group. We improved the Fischer-Zach method and developed a facile, mild and environmentally benign methodology towards the synthesis of the glycals in Zn-NaH2PO4-H2O or Zn-PEG600-H2O system. Our method involves the treatment of glycosyl bromides with Zn in NaH2PO4 aqueous solution or PEG600-H2O at room temperature, affording various glycals in excellent yields.

Interference Effects in Hyperfine Induced 2s2p P-3(0), P-3(2) -> 2s(2) S-1(0) Transitions of Be-like Ions

In this paper, we explored the characteristics of the interference effects between perturbative states in hyperfine induced 2s2p P-3(0), P-3(2) -> 2s(2) S-1(0) transitions of Be-like ions. It was found that the interference effects non-monotonically change with increasing atomic number Z in these two transitions. The strongest interference effect is near Z = 9 for 2s2p P-3(0), -> 2s(2) (1)S(0)transition and near Z = 7 for the other.

Mo的掺杂对Ce_(0.8)Gd_(0.2)O_(1.9)烧结温度及电性能的影响

掺杂的CeO2基固体电解质因其在中低温条件下(500￣700℃)具有高氧离子电导率而成为有希望的IT-SOFCs(intermediate temperature-solid oxide fuel

Synthesis and characterization of color-stable electroluminescent polymers: Poly(dinaphtho [1,2-a : 1 ',2 '-g]-s-indacene)s

Two new stepladder conjugated polymers, that is, poly(7,7,15,15-tetraoctyldinaphtho[1,2-a:1',2'-g]-s-indacene) (PONSI) and poly(7,7,15,15-tetra(4-octylphenyl)dinaphtho[1,2-a:1',2'-g]-s-indacene) (PANSI) with alkyl and aryl substituents, respectively, have been synthesized and characterized. In comparison with poly(indenofluorene)s, both polymers have extended conjugation at the direction perpendicular to the polymer backbone because of the introduction of naphthalene moieties. The emission color of the polymers in film state is strongly dependent on the substituents. While PONSI emits at a maximum of 463 nm, PANSI with the same backbone but aryl substituents displays dramatically redshifted emission with a maximum at 494 nm.

Preparation and Characterization of Melt Grafting 2-acrylamido-2-methyl-1-propanesulfonic Acid onto Pre-Irradiated Linear Low Density Polyethylene

Linear low density polyethylene (LLDPE) was functionalized with 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) by using -ray pre-irradiation in air in a twin-screw extruder. Fourier-transformed infrared spectroscopy (FT-IR) and electron spectroscopy for chemical analysis (ESCA) were used to characterize the formation of LLDPE-g-AMPS copolymers. The content of AMPS in LLDPE-g-AMPS was determined by using element analysis instrument. The effects of concentrations of monomer, reaction temperature and pre-irradiation dose on degree of grafting were investigated. The critical surface tension of LLDPE-g-AMPS was measured by using contact angle method. The influences of the degree of grafting on crystallization properties were studied by using DSC. Compared with neat LLDPE, the crystallization temperature increased about 4C, and crystallinity decreased with increasing degree of grafting. Crystallization rates of grafted LLDPE were faster than that of plain LLDPE at the same crystallization temperature.

Synthesis and applications of 3-[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols or 3,3 '-bis[6-(hydroxymethyl)pyridin-2-yl]-1,1 '-bi-2-naphthols

A series of new 1,1'-bi-2-naphthol (BINOL) derived ligands, 3-[6-(hydroxymethyl)pyridin-2-yl]-BINOLs or 3,3'-bis[6(hydroxymethyl)pyridin-2-yl]-BINOLs, bearing one or two chiral pyridinylmetlianols attached to a binaphthyl skeleton, have been synthesized using the Suzuki cross-coupling reaction. The resulting compounds have been used as ligands in the enantioselective addition of diethylzinc to aldehydes; the products were obtained with up to 96% ee.

Poly[di-mu(3)-chloro-mu(2)-trans-1,2-di-4-pyridylethylene-dicopper(I)]: a two-dimensional organic-inorganic hybrid constructed from linear CuCl clusters and bridging ligands

The structure of the title compound, [Cu2Cl2(C12H10N2)](n), contains infinite CuCl staircase-like chains, which lie about inversion centres. The trans-1,2-di-4-pyrid-ylethyl-ene mol-ecules also lie about inversion centres and connect the CuCl chains through Cu-N coordination bonds into a two-dimensional organic-inorganic hybrid network. The planar sheets are stacked along the c axis and associated through weak C-H center dot center dot center dot Cl inter-actions. The results show a reliable structural motif with controllable separation of the CuCl chains by variation of the length of the ligand.

Novel highly selective anion chemosensors based on 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole

2-(2-Hydroxyphenyl)-5-phenyl-1,3,4-oxadiazole 1 and 2,5-bis(2-hydroxyphenyl)-1,3,4-oxadiazole 2 were used as anion fluorescent and colorimetric chemosensors with high selectivity for H2PO4- and F- over Cl-, while 2 can even distinguish H2PO4- from F-. (C) 2002 Elsevier Science Ltd. All rights reserved.

3{1-[2-(-3-羟基-1-甲基-2-亚丁烯氨基)-苯亚氨基]-乙基}4-甲硫基-2,4-戊二烯-2-醇的不对称Schiff碱镍(Ⅱ)配合物的合成、结构和性质

由 5-(2-乙酰基-1-甲硫基-3-羰基-亚丁基)-丙二酸亚异丙酯 (1)与邻苯二胺及乙酸镍()经一步反应合成了3{1-[2-( -3-羟基-1-甲基-2-亚丁烯氨基)-苯亚氨基 ]-乙基} 4-甲硫基-2,4-戊二烯-2-醇(3)的不对称四齿 Schiff碱镍()配合物(2),X射线衍射结果表明,配合物 2属单斜晶系,P21/C空间群.a=1.1476(2)nm,b=1.1782(2)nm,c=1.4810(3)nm;β=111.73(2)°,V=1.8602(7)nm3,Z=4,Rf=0.0535.电化学(循环伏安)测定结果表明,该配合物在测定条件下(阳极峰电位为1.1)发生了不可逆的氧化-还原反应.

Synthesis and structure of iron complex with 1,2-dithiolate-1,2-dicarba-closo-dodecaborane [Li(THF)(4)][Fe(S2C2B10H10)(2)(THF)]

The crystal of complex [Li(THF)(4)][Fe(S2C2B10H10)(2)(THF)] 3 belongs to monoclinic, space group P2(1) with a = 11.964(2), b = 16.527(3), c = 12.554(3) Angstrom,beta = 108.70(3)degrees, V= 2351.3(8) Angstrom(3), Z = 2, M-r = 835.95, D-c = 1.181 g/cm(3), mu (MoKalpha) = 5.30 cm(-1), f(000) = '874, R = 0.0622 and Rw 0.1538 for 1641 observed reflections with I > 2sigma(I). The ionic complex,of 3 contains the square pyramidal anion of [Fe(S2C2B10H10)(2)(THF)](-) and the tetrahedral cation of [Li(THF)(4)](+). The iron is 5-coordinated and located in the square pyramidal configuration. The iron atom and the four sulfur atoms are almost coplanar. The Lithium atom is coordinated with four oxygen atoms of four THF molecules and located in a tetrahedral configuration.