221 resultados para 194-1193B
em Chinese Academy of Sciences Institutional Repositories Grid Portal
Resumo:
An investigation into influence of obstructions on premixed flame propagation has been carried out in a semi-open tube. It is found that there exists flame acceleration and rising overpressure along the path of flame due to obstacles. According to the magnitude of flame speeds, the propagation of flame in the tube can be classified into three regimes: the quenching, the choking and the detonation regimes. In premixed flames near the flammability limits, the flame is observed first to accelerate and then to quench itself after propagating past a certain number of obstacles. In the choking regime, the maximum flame speeds are somewhat below the combustion product sound speeds, and insensitive to the blockage ratio. In the more sensitive mixtures, the transition to detonation (DDT) occurs when the equivalence ratio increases. The transition is not observed for the less sensitive mixtures. The dependence of overpressure on blockage ratio is not monotonous. Furthermore, a numerical study of flame acceleration and overpressure with the unsteady compressible flow model is performed, and the agreement between the simulation and measurements is good.
Resumo:
Protein-Chip as micro-assays for the determination of protein interaction, the analysis, the identification and the purification of proteins has large potential applications. The Optical Protein-Chip is able to detect the multi-interaction of proteins and multi-bio-activities of molecules directly and simultaneously with no labeling. The chip is a small matrix on solid substrate containing multi-micro-area prepared by microfabrication with photolithography or soft lithography for surface patterning, and processed with surface modification which includes the physical, chemical, and bio-chemical modifications, etc. The ligand immobilization, such as protein immobilization, especially the oriented immobilization with low steric hindrance and high bio-specific binding activity between ligand and receptor is used to form a sensing surface. Each area of the pattern is corresponding to only one bioactivity. The interval between the areas is non-bioactive and optically extinctive. The affinity between proteins is used to realize non-labeling microassays for the determination of protein identification and protein interaction. The sampling of the chip is non-disturbing, performed with imaging ellipsometry and image processing on a database of proteins.
Resumo:
The gas flows in micro-electro-mechanical systems possess relatively large Knudsen number and usually belong to the slip flow and transitional flow regimes. Recently the lattice Boltzmann method (LBM) was proposed by Nie et al. in Journal of Statistical Physics, vol. 107, pp. 279-289, in 2002 to simulate the microchannel and microcavity flows in the transitional flow regime. The present article intends to test the feasibility of doing so. The results of using the lattice Boltzmann method and the direct simulation Monte Carlo method show good agreement between them for small Kn (Kn = 0.0194), poor agreement for Kn = 0.194, and large deviation for Kn = 0.388 in simulating microchannel flows. This suggests that the present version of the lattice Boltzmann method is not feasible to simulate the transitional channel flow.
Resumo:
本文应用数值计算的方法着重研究了跨声速翼型开孔壁的减阻效果。计算采用了边界层与位流相互作用的模型,藉以了解开孔壁对激波强度及结构的影响和对边界层控制的效果。通过对NACA0012翼型的计算表明,本文采用的自然吹吸的开孔模型能够显著地削弱激波的强度,改善激波的结构,但会使粘性损失增加。在马赫数较小时,翼型开孔后总阻力会增加,而在大马赫数时,开孔翼型的减阻效果才表现出来。这种趋势是与实验结果相吻合的。
Resumo:
详细评述了缺陷连续统的规范场理论,该理论是近代材料科学和固体力学中新发展起来颇有意义的一个分支。首先强调了Noether定理及其逆定理在构造缺陷规范场理论中的重要性。同时基于Yang-Mills普适规范场构造,包括对SO(3)T(3)群的最小替换和最小耦合原理,系统地介绍了Golebiewska-Lasota,Edelen,Kadic和Edelen等人的原始性工作及他们的贡献。本文表明,Kadic和Edelen的理论是基于一组缺陷动力学的线性连续性方程发展起来的,不能和关于缺陷场的现有几何理论完全协调起来。考虑到这一点,本文提供了另一种方法来建立非线性弹性规范场的相应理论,这里考虑了Poincaré规范群SO(3)T(3).采用类似于研究引力场理论的Kibble方法,导出了缺陷连续统的拉氏密度。非完整坐标变换和非欧联络系数在数学上完全等价于子Poincaré群SO(3)T(3)的规范场。因此,本文的规范场理论和4维物质流形的缺陷场的非线性几何理论是完全一致的,并证明在弱缺陷条件下,可以简化到Kadic和Edelen的结果。
Resumo:
<正> 今天,生物力学的发展似乎进入了一个新的时期。它有什么特点?未来如何?这是一个引人关注的问题。要回答这个问题,回顾一下它的过去是必要的。 生物力学的发展大体可分三个时期。 Ⅰ.“前学科”时期 生命现象中力学问题的研究由来已久,可以追溯到亚里士多德.但成为一门独立的学
Resumo:
本文给出了平面应变情况下Ⅰ型问题裂纹尖端附近二阶渐近场的定解方程、求解方法和计算结果,并以某些细致的有限无解为依据,估计了二阶渐近场的幅值系数k_2,分析了它对应力、应变分布和三轴张力的影响,变化规律以及在弹塑性断裂准则中的作用。
Resumo:
<正> 40年代以来,从凝聚炸药的化学成分和密度直接计算它的爆轰性质有几种不同的方法,它们的共同点都是采用稳定流动的守恒定律和在爆轰的不连续面上的CJ条件,不同点在于对爆轰产物这样的非常稠密的气体和固体的混合物用什么样的状态方程来描述,本文综述几种状态方程的特点和它们所预估的爆轰压力值之间的差异。
Resumo:
<正> 随着工农业和交通运输业的迅速发展,人类社会对矿物燃料的需求越来越大。石油既是一种比较清洁而又使用便利的通用燃料,又是可贵的化工原料,其需求量增长尤为迅速。石油资源最终枯竭的前景是意料中的事。矿物燃料中得天独厚,储量最大的是煤。仅以我国而论,现已探明的煤的天然储量有几千亿吨,按现在的年产量估计,可供开采一千多年。但是,煤既不适用于原有的烧油锅炉、各种动力装置和输送系统,燃烧后排放的废气和粉尘又
Resumo:
针对水中悬浮隧道在波浪力作用下动力响应的问题,通过Hamilton原理推导得到了悬浮隧道管段和锚索的运动控制方程,同时考虑了锚索横向和轴向变形之间的耦合作用,建立了悬浮隧道的动力响应模型,在时间域内采用逐步积分法迭代求解其运动控制方程.波浪力采用Airy线性波理论和Morison方程计算.计算结果表明:当锚索长细比较大时,锚索的自振模态会被激发,其横向和轴向变形之间的耦合作用不可忽略.随着入射波高或悬浮隧道重浮比的增加,悬浮隧道的横荡位移以及横摇角增大,但结构的垂荡位移以及锚索中的应力受波浪的影响较小.
Resumo:
本文应用基元反应模型和频散可控耗散格式(DCD)对氢氧爆轰波进行了二维数值模拟.氢氧混合物的化学反应模型考虑了8种组分20个反应方程式.在处理化学反应引起的刚性问题时采用了时间算子分裂的方法.本文首先对爆轰波数值结果和实验结果进行了对照验证,然后对爆轰波在楔面反射由马赫反射向规则反射转变的过程进行了数值分析,得到了反射转变临界角,并和实验结果及理论分析进行了比较,结果是令人满意的;本文还对爆轰波的多波结构进行了初步的数值分析.
Resumo:
在高超声速(M=6)流动中,实验研究了侧向喷流的干扰特性,并探讨了喷流压力、攻角、迎风侧及背风侧喷流对侧向喷流干扰特性的影响.结果表明,在高超声速流动中,随喷流压力增大,喷流弓形激波与来流弓形激波相交,喷流前的高压区增大,而喷流后的低压区几乎不受影响,喷流的控制效果加强.与迎风侧喷流相比,背风侧喷流控制效果更好,这一趋势随攻角的增大更加明显.
Resumo:
本书阐明了板壳断裂理论的基础。论证了Reissner型板壳断裂理论的科学性、经典板壳断裂理论的缺陷及在一定范围内仍具有的实用价值;介绍了作者所创意的研究Reissner型板壳断裂纹尖端场的方法等。
目录
- §1.1 板壳弯曲断裂问题
- §1.2 Kirchhoff经典板壳弯曲断裂理论
- §1.3 Reissner型板壳弯曲断裂理论
- §1.4 Kirchhoff与Reissner型板壳弯曲断裂理论的比较
- §1.5 含裂纹有限尺寸板壳断裂分析的局部-整体法
- §1.6 含表面裂纹板壳
- §2.1 Kirchhoff板的基本概念和基本假定
- §2.2 基本公式与弹性曲面微分方程
- §2.3 边界条件
- §2.4 弹性薄板的应变能
- §2.5 极坐标下的挠曲面微分方程与内力公式
- §2.6 裂纹尖端场特征展开式通项公式
- §2.7 Kirchhoff板弯曲应力强度因子
- §3.1 基本方程和公式的复变函数表示
- §3.2 所引入函数的确定程度与一般形式
- §3.3 坐标变换与边界条件
- §3.4 运用保角变换方法求解孔口问题
- §3.5 应力强度因子与函数Φ(z)的关系
- §3.6 复变-主部分析法之应用简例
- §3.7 共直线裂纹问题的一般解答
- §3.8 典型弯曲裂纹问题的解答及弯曲应力强度因子公式
- §3.9 共圆曲线裂纹问题的解答及弯曲应力强度因子公式
- §4.1 裂纹尖端奇异元的位移模式与弯曲应力强度因子
- §4.2 裂纹尖端奇异元的刚度矩阵
- §4.3 裂纹尖端奇异元与常规单元的连接
- §4.4 解析法与数值法的结果比较与讨论
- §4.5 两共线半无限裂纹问题的定解条件及解的实用价值
- §5.1 Reissner型板的基本假定
- §5.2 Reissner型板的基本公式与平衡微分方程
- §5.3 基本方程的简化
- §5.4 边界条件
- §5.5 极坐标下的基本公式与平衡微分方程
- §5.6 两种平板理论用于无裂纹板时的比较
- §5.7 两种乎板理论用于含裂纹板时的比较
- §6.1 基本方程和一般求解方法
- §9.1 局部-整体法与其它解析和数值法的结果比较
- §9.2 边界对应力强度因子的影响
- §9.3 板的支承条件及长宽比的影响
- §9.5 计算Reissner型板应力强度因子的一组近似方程与近似解法
- §9.4 Reissner型板理论与Kirchhoff板理论所得应力强度因子的比较
- §9.6 关于数值计算的几点讨论
Resumo:
![](http://img2.imagesbn.com/p/9780080412665_p0_v1_s260x420.gif)
Table of Contents
1 | Introduction | 1 |
1.1 | What is an Adiabatic Shear Band? | 1 |
1.2 | The Importance of Adiabatic Shear Bands | 6 |
1.3 | Where Adiabatic Shear Bands Occur | 10 |
1.4 | Historical Aspects of Shear Bands | 11 |
1.5 | Adiabatic Shear Bands and Fracture Maps | 14 |
1.6 | Scope of the Book | 20 |
2 | Characteristic Aspects of Adiabatic Shear Bands | 24 |
2.1 | General Features | 24 |
2.2 | Deformed Bands | 27 |
2.3 | Transformed Bands | 28 |
2.4 | Variables Relevant to Adiabatic Shear Banding | 35 |
2.5 | Adiabatic Shear Bands in Non-Metals | 44 |
3 | Fracture and Damage Related to Adiabatic Shear Bands | 54 |
3.1 | Adiabatic Shear Band Induced Fracture | 54 |
3.2 | Microscopic Damage in Adiabatic Shear Bands | 57 |
3.3 | Metallurgical Implications | 69 |
3.4 | Effects of Stress State | 73 |
4 | Testing Methods | 76 |
4.1 | General Requirements and Remarks | 76 |
4.2 | Dynamic Torsion Tests | 80 |
4.3 | Dynamic Compression Tests | 91 |
4.4 | Contained Cylinder Tests | 95 |
4.5 | Transient Measurements | 98 |
5 | Constitutive Equations | 104 |
5.1 | Effect of Strain Rate on Stress-Strain Behaviour | 104 |
5.2 | Strain-Rate History Effects | 110 |
5.3 | Effect of Temperature on Stress-Strain Behaviour | 114 |
5.4 | Constitutive Equations for Non-Metals | 124 |
6 | Occurrence of Adiabatic Shear Bands | 125 |
6.1 | Empirical Criteria | 125 |
6.2 | One-Dimensional Equations and Linear Instability Analysis | 134 |
6.3 | Localization Analysis | 140 |
6.4 | Experimental Verification | 146 |
7 | Formation and Evolution of Shear Bands | 155 |
7.1 | Post-Instability Phenomena | 156 |
7.2 | Scaling and Approximations | 162 |
7.3 | Wave Trapping and Viscous Dissipation | 167 |
7.4 | The Intermediate Stage and the Formation of Adiabatic Shear Bands | 171 |
7.5 | Late Stage Behaviour and Post-Mortem Morphology | 179 |
7.6 | Adiabatic Shear Bands in Multi-Dimensional Stress States | 187 |
8 | Numerical Studies of Adiabatic Shear Bands | 194 |
8.1 | Objects, Problems and Techniques Involved in Numerical Simulations | 194 |
8.2 | One-Dimensional Simulation of Adiabatic Shear Banding | 199 |
8.3 | Simulation with Adaptive Finite Element Methods | 213 |
8.4 | Adiabatic Shear Bands in the Plane Strain Stress State | 218 |
9 | Selected Topics in Impact Dynamics | 229 |
9.1 | Planar Impact | 230 |
9.2 | Fragmentation | 237 |
9.3 | Penetration | 244 |
9.4 | Erosion | 255 |
9.5 | Ignition of Explosives | 261 |
9.6 | Explosive Welding | 268 |
10 | Selected Topics in Metalworking | 273 |
10.1 | Classification of Processes | 273 |
10.2 | Upsetting | 276 |
10.3 | Metalcutting | 286 |
10.4 | Blanking | 293 |
Appendices | 297 | |
A | Quick Reference | 298 |
B | Specific Heat and Thermal Conductivity | 301 |
C | Thermal Softening and Related Temperature Dependence | 312 |
D | Materials Showing Adiabatic Shear Bands | 335 |
E | Specification of Selected Materials Showing Adiabatic Shear Bands | 341 |
F | Conversion Factors | 357 |
References | 358 | |
Author Index | 369 | |
Subject Index | 375 |