Chemical kinetics and self-ignition in a model supersonic hydrogen-air combustor

Self-ignition tests of a model scramjet combustor were conducted by using parallel sonic injection of gaseous hydrogen from the base of a blade-like strut into a supersonic vitiated airstream. The range of stagnation pressure and temperature studied varied from 1.0 to 4.5 MPa and from 1300 to 2200 K, respectively. Experimental results show that the self-ignition limit, in terms of either global or local quantities of pressure and temperature, exhibits a nonmonotonic behavior resembling the classical homogeneous explosion limit of the hydrogen-oxygen system. Specifically, for a given temperature, increasing pressure from a low value can render a nonignitable mixture to first become ignitable, then nonignitable again, This correspondence shows that, despite the globally supersonic nonpremixed configuration studied herein, ignition is strongly influenced by the intricate chemical reaction mechanism and thereby exhibits the homogeneous explosion character. Consequently, self-ignition criteria based on a global reaction rate approximating the complex chemistry are inadequate. An auxiliary computational study on counterflow ignition was also conducted to systematically investigate the contamination effects of vitiated air. Results indicate that the net contamination effects for the present experimental data are expected to be substantially smaller than contributions from the individual contamination species because of the counterbalancing influences of the H2O-inhibition and NO-promotion reactions in effecting ignition.

Blue upconversion luminescence generation in Ce3+: Gd2SiO5 crystals by infrared femtosecond laser irradiation

Blue frequency-upconversion fluorescence emission has been observed in Ce3+-doped Gd2SiO5 single crystals, pumped with 120-fs 800 nm IR laser pulses. The observed fluorescence emission peaks at about 440nm is due to 5d -> 4f transition of Ce3+ ions. The intensity dependence of the blue fluorescence emission on the IR excitation laser power obeys the cubic law, demonstrating three-photon absorption process. Analysis suggested that three-photon simultaneous absorption induced population inversion should be the predominant frequency upconversion mechanism. (c) 2006 Optical Society of America.

水生植物凤眼莲的种内基因型差异与入侵模式

原产于亚马逊河流域的水生植物凤眼莲（Eichhornia crassipes）在花部结构上有三种花型（L、M和S），故其配殖系统（mating system）为典型的三型花柱（tristyly）。但在入侵地区，它却常只有M和L两种花型，其中尤以M型占据绝对优势，使有性繁殖水平大为下降。为了解释凤眼莲在入侵过程中，花型频率为何发生变化以及该变化对其在入侵地的适应性进化上有何影响，作者在中国西南的两个居群中连续两年开展了野外生长和人工授粉实验，对比分析水面和泥地两类不同生境中M和L在克隆生长、生物量积累以及有性繁殖水平等方面的异同，并利用RAPD、 ISSR片段比较了具M型和L型花植物个体间的遗传变异水平。对三型花柱这一长期引人注目的遗传模式的分子位点也尝试了连锁片段的克隆和测序。 克隆生长的对比实验发现，在2004年，漂浮生长的M个体平均克隆分株数为25.37，L为21.20，前者显示较强的克隆生长能力（t＝2.252， P< 0.05）;2005年的实验再次证实M（每个个体19.83个分株）比L（每个个体15.53分株）表现出了显著较强的克隆优势（t＝2.631，P<0.001）。M较L多产生克隆约24%。 但在岸边泥地上固着生长时，2004年L个体平均克隆分株为16.20，M 为10.17个分株。L表现出了更强的克隆生长能力（t＝4.788，p<0.001），与漂浮生长状况下的情形恰恰相反，暗示M与L个体可能存在一定的生态位分化。这种分化可能是在入侵过程中形成的，也可能反映了原产地亚马孙流域旱涝交替造成的固着生长与漂浮生长交替发生的种内适应性。 生物量（干重）的对比分析发现，M个体在漂浮生长和固着生长的情况下都比L有着更高的生物量积累（漂浮生长实验：t＝6.173，p<0.005（2004年）;t＝6.99，p<0.001（2005年）。固着生长实验：t＝4.029，p<0.001）。生物量对凤眼莲的竞争和过冬有着一定的作用，因此较大的生物量积累可能是M个体在当地气候和环境中逐渐适应的一个结果。 有性繁殖的实验包括了实验个体的花序数与花朵数、自交与异交人工授粉的结实情况以及种子萌发率等方面的对比分析。结果表明，虽然M和L个体在花序数和花朵数上不存在显著差异，但是M个体在自交和异交的种子产量上比L略高，尤其是自交的种子产量，M显著高于L（M平均每个蒴果的自交种子产量为139.8，L为76.2）。以各100粒种子进行萌发实验，发现两花型之间在种子萌发率上不存在显著差异。对于M而言，其自交种子产量远大于异交种子产量 （139.8 vs. 93.3），且种子萌发率也略大于异交的种子萌发率（自交种子萌发率45.47％，异交种子萌发率 30.73％）。结合以上的实验结果，本文认为M基因型优势的形成可能与M个体与当地环境长期适应导致的生长与繁殖 上的优势有关。M的本地适应性是建立在特定的遗传背景上时，异交反而会破坏这种遗传组合，造成远交衰退。 对40个M和30个L个体进行20个RAPD引物和20个ISSR引物的遗传分析时发现，所有个体在RAPD表型上没有区别，但是在M中出现了3个ISSR表型，在L中出现了2个ISSR表型。本文还尝试利用RAPD技术扫描与三型花柱的遗传位点连锁的DNA片段。在146个RAPD随机引物中，初步发现两个候选片段，一个750bp，另一个2 000bp;已对它们进行了克隆、测序。 这些初步实验表明凤眼莲在我国的入侵可能伴随着基因型的差异表现和居群遗传分化，这种基因型的差异表现对该植物的成功入侵具有作用。其中，花型为M的个体的优势生长解释了该花型在中国分布区内的主导地位。推测该生长优势的遗传基础可能来源于基因组内较高的杂合子水平和在入侵地较长的适应历史，但最终结论尚有待进一步的实验证据。

梁子湖鲤鱼鳞片年轮的标志及其形成的时期

<正> 鱼类年龄的测定是渔业生物学上一个重要问题,为了对鱼类资源合理地开发利用,必须广泛展开鱼类的生长、鱼群组成、性成熟的年龄等有关渔业生物学问题的研究。但是这些问题的解决,都以能正确测定鱼类的年龄为先决条件。鲤鱼是梁子湖中最重要的经济鱼类,因此我们就选择鲤鱼作为一个典型来研究测定年龄的方法。我们认为掌握了鲤鱼年龄测定的正确方法以后,可能对其他鲤科鱼类的年龄测定也有所帮助。Hoffbauer 氏(1899)可能是最早研究鲤鱼年龄测定的人,他认为在鱼体生长迅速时,鳞片上环片间距较疏且不规则,而生长较缓慢时,

Observations on two species of phyllodistomes (Trematoda : Gorgoderidae) from fishes of the Hubei Province, central China, with an erection of Neophyllodistomum gen. n.

Two rare trematode species so far reported in the genus Phyllodistomum Braun, 1899, P. pawlovskii (Zmeev, 1936) and P. serrispatula Chin, 1963, were found in the urinary system the yellow catfish Pelteobagrus fulvidraco (Richardson) of Bao'an Lake (prevalence 8 %) and the swamp eel Monopterus albus (Zouiev) of Liangzi Lake (prevalence 6 9/6), respectively, from the Hubei Province, central China. In contrast to the original description, P. pawlovskii showed a considerable morphological variability particularly in the shape, size and topography of testes. A unique morphological feature of P. serrispatula is the presence of many conspicuous lateral outgrowths on the hindbody and, principally based on this character, a new genus Neophyl-lodistomum is erected (type species N. serrispatula (Chin, 1963) comb. n.)) to accommodate this species. Both trematode species are briefly redescribed. P. pawlovskii and N. serrispatula are reported for the first time from the Hubei Province and the former from the Yangtze River drainage system.

Application of plane wave method to the calculation of electronic states of nano-structures

The electronic states of nano-structures are studied in the framework of effective-mass envelope-function theory using the plane wave basis. The barrier width and the number of plane waves are proposed to be 2.5 times the effective Bohr radius and 15(n), respectively, for n-dimensional nano-structures (n = 1,2,3). Our proposals can be widely applied in the design of various nano-structure devices.

An All-E-Beam Lithography Process for the Patterning of 2D Photonic Crystal Waveguide Devices

We present an all-e-beam lithography (EBL) process for the patterning of photonic crystal waveguides.The whole device structures are exposed in two steps. Holes constituting the photonic crystal lattice and defects are first exposed with a small exposure step size (less than 10nm). With the introduction of the additional proximity effect to compensate the original proximity effect, the shape, size, and position of the holes can be well controlled.The second step is the exposure of the access waveguides at a larger step size (about 30nm) to improve the scan speed of the EBL. The influence of write-field stitching error can be alleviated by replacing the original waveguides with tapered waveguides at the joint of adjacent write-fields. It is found experimentally that a higher exposure efficiency is achieved with a larger step size;however,a larger step size requires a higher dose.

Synthesis and electrochemical characteristics of lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate

Four lanthanide complexes with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate were prepared and characterized by elemental analyses, LR, UV-Visible,H-1 NMR, XPS and molar conductance. The redox properties of the lutetium complex with 2-nitro-5,10,15,20-tetraphenylporphyrin and acetylacetonate in dichloromethane were studied by cyclic voltammetry.

Cationic cyclization of styrene-butadiene rubber

Controlled cyclization of styrene-butadiene rubber (SBR) was achieved with the aid of cationic catalyst system based on diethylaluminium chloride (AIEt(2)Cl) and benzyl chloride (C6H5CH2Cl) and by working in xylene solution at high temperature (T > 100 degreesC). The main parameters of the cyclization process were investigated. Elastomers with low intrinsic viscosity, ready solubility, free gel were obtained. The products were characterized with IR H-1-NMR, DSC, GPC. The polycyclic structure was determined. (C) 2001 Published by Elsevier Science Ltd.