An All-E-Beam Lithography Process for the Patterning of 2D Photonic Crystal Waveguide Devices


Autoria(s): Yu Hejun; Yu Jinzhong; Chen Shaowu
Data(s)

2006

Resumo

We present an all-e-beam lithography (EBL) process for the patterning of photonic crystal waveguides.The whole device structures are exposed in two steps. Holes constituting the photonic crystal lattice and defects are first exposed with a small exposure step size (less than 10nm). With the introduction of the additional proximity effect to compensate the original proximity effect, the shape, size, and position of the holes can be well controlled.The second step is the exposure of the access waveguides at a larger step size (about 30nm) to improve the scan speed of the EBL. The influence of write-field stitching error can be alleviated by replacing the original waveguides with tapered waveguides at the joint of adjacent write-fields. It is found experimentally that a higher exposure efficiency is achieved with a larger step size;however,a larger step size requires a higher dose.

We present an all-e-beam lithography (EBL) process for the patterning of photonic crystal waveguides.The whole device structures are exposed in two steps. Holes constituting the photonic crystal lattice and defects are first exposed with a small exposure step size (less than 10nm). With the introduction of the additional proximity effect to compensate the original proximity effect, the shape, size, and position of the holes can be well controlled.The second step is the exposure of the access waveguides at a larger step size (about 30nm) to improve the scan speed of the EBL. The influence of write-field stitching error can be alleviated by replacing the original waveguides with tapered waveguides at the joint of adjacent write-fields. It is found experimentally that a higher exposure efficiency is achieved with a larger step size;however,a larger step size requires a higher dose.

于2010-11-23批量导入

zhangdi于2010-11-23 13:02:33导入数据到SEMI-IR的IR

Made available in DSpace on 2010-11-23T05:02:33Z (GMT). No. of bitstreams: 1 4172.pdf: 1315001 bytes, checksum: ee16a2ed638b597e0216b755a3c99354 (MD5) Previous issue date: 2006

National Natural Science Foundation of China

Institute of Semiconductors, Chinese Academy of Sciences

National Natural Science Foundation of China

Identificador

http://ir.semi.ac.cn/handle/172111/16485

http://www.irgrid.ac.cn/handle/1471x/102281

Idioma(s)

英语

Fonte

Yu Hejun;Yu Jinzhong;Chen Shaowu.An All-E-Beam Lithography Process for the Patterning of 2D Photonic Crystal Waveguide Devices,半导体学报,2006,27(11):1894-1899

Palavras-Chave #光电子学
Tipo

期刊论文