Separation of peptides by strong cation-exchange capillary electrochromatography

Separation of small peptides on ion-exchange capillary electrochromatography (IE-CEC) with strong cation-exchange packing (SCX) as stationary phase was investigated. It was observed that the number of theoretical plates for small peptides varied from 240 000 to 460 000/m, and the relative standard deviation for t(0) and the migration time of peptides were less than 0.57% and 0.27%, respectively for ten consecutive runs. Unusually high column efficiency has been explained by the capillary electrophoretic stacking and chromatofocusing phenomena during the injection and separation of positively charged peptides. The sample buffer concentration had a marked effect on the column efficiency and peak area of the retained peptides. The influences of the buffer concentration and pH value as well as the applied voltage on the separation were investigated. It has been shown that the electrostatic interaction between the positively charged peptides and the SCX stationary phase played a very important role in IE-CEC, which provided the different separation selectivity from those in the capillary electrophoresis and reversed-phase liquid chromatography. A fast separation of ten peptides in less than 3.5 min on IE-CEC by adoption of the highly applied voltage was demonstrated. (C) 2000 Elsevier Science B.V. All rights reserved.

Capillary electrochromatography using a strong cation-exchange column with a dynamically modified cationic surfactant

A novel mode of capillary electrochromatography (CEC), called dynamically modified strong cation-exchange CEC (DMSCX-CEC), is described in this paper. A column packed with a strong cation-exchange (SCX) packing material was dynamically modified with a long-chain quaternary ammonium salt, cetyltrimethylammonium bromide (CTAB), which was added to the mobile phase. CTAB ions were adsorbed onto the surface of the SCX packing material, and the resulting hydrophobic layer on this packing was used as the stationary phase. Using the dynamically modified SCX column, neutral solutes were separated with the CEC mode. The highest number of theoretical plates obtained was about 190 000/m, and the relative standard deviations (RSD's) for migration times and capacity factors of alkylbenzenes were less than 1.0% and 2.0% for five consecutive runs, respectively. The effects of CTAB and methanol concentrations and the pH value of the mobile phase on the electroosmotic flow and the separation mechanism were investigated. Excellent simultaneous separation of the basic and neutral solutes in DMSCX-CEC with a high-pH mobile phase was obtained, A mixture containing the acidic, basic, and neutral compounds was well separated in this mode with a low-pH mobile phase; however, peak tailing for basic compounds was observed in this mobile phase.

Composite anode for CO tolerance proton exchange membrane fuel cells

Fuel of proton exchange membrane fuel cells (PEMFC) mostly comes from reformate containing CO. which will poison the fuel cell electrocatalyst. The effect of CO on the performance of PEMFC is studied in this paper. Several electrode structures are investigated for CO containing fuel. The experimental results show that thin-film catalyst electrode has higher specific catalyst activity and traditional electrode structure can stand for CO poisoning to some extent. A composite electrode structure is proposed for improving CO tolerance of PEMFCs. With the same catalyst loading. the new composite electrode has improved cell performance than traditional electrode with PtRu/C electrocatalyst for both pure hydrogen and CO/H-2. The EDX test of composite anode is also performed in this paper, the effective catalyst distribution is found in the composite anode. (C) 2002 Elsevier Science B.V. All rights reserved.

中国企业员工组织承诺研究

The research objectives were to investigate the psychological structure of employees' organizational commitments(OCs), and its antecedents, and to examine the relative effects of employees' OCs to their performances. In order to deeply uncover the nature of OCs, some standard methods, such as in-depth interview, focus-group, semi-open questionnaire, standard questionnaire etc., were employed. In data analysis, not only some common statistical methods, such as multivariate analysis of variance, cross-table analysis, factor analysis, but also some forefront ones, such as confirmatory factor analysis and path analysis of SEM, were used. The paper covers six chapters: 1) In the first chapter, Firstly some previous empirical studies, which examined structures, antecedents, correlates, and/or consequences of organizational commitment in China and Western countries, were summarized. This summary covers most of the respectable researchers' works of this field, such as H.S.Becker, B.Buchanan, L.W.Porter, G. Ritzer, H.M.Trice, J.A.Alutto, L.G.Hrebiniak, R.T.Mowday, J.P.Meyer, N.J.Allen, G.W.McGee, R.C.Ford, R.Eisenberger, etc. Then three theoretical hypothesis were put forward as following: ① In China, OCs should be multidimensional psychological structures, which means there should exist more than one type of OCs; ② There should be some different antecedents to different OCs; ③ Employees with different types of OC should perform differently in their works. Finally the theoretical and practical significance were discussed. 2) In the second chapter, great efforts were made to investigate the OC types. Firstly, in-depth interview with managers and employees, semi-open questionnaire, and some other methods were used in the pilot research to gather much qualitative material. Then OC questionnaire was designed to get quantitative data in about 20 enterprises, including state-owned, collective-owned, wholly foreign-funded, and joint-ventures. During revising of this questionnaire, there were about 5000 samples surveyed. after factor analysis, the data shows that there should be 5 types of OCs in China, which were respectively named as Affective Commitment, Normative commitment, Ideal Commitment, Economic Commitment, Choice Commitment. Thirdly, confirmatory factor analysis method was used to successfully confirm this 5-factor model. Finally, Cronbach a and test-retest correlate indicate that this questionnaire is reliable. Since factor analysis result has show its construct validity, a simple criterion-related validity research was conducted. 3) In order to investigate the correlation between different OC and employee performance and different antecedents of OC, 5 other questionnaires, such as Employee Satisfaction Questionnaire, Perceived Organizational Support Questionnaire, Social Exchange Questionnaire, Altruism Scale, and Leader Confidence Scale were revised in the third chapter. 4)In the fourth chapter, a lot of correlates, cross-table analysis were conducted to show the correlation between different OCs and 10 performances, which indicate employees with different OCs will show different performance in 10 variables, such as altruism, etc. 5) In the fifth chapter, correlate analysis, multivariate of analysis, and path analysis of SEM were used to investigate the antecedents of OC. A satisfactory model showing the correlation between OC and their antecedents was confirmed. 6) In the last chapter, all researches about OC, and its limitations were summarized.

Preparation and characterization of multi-walled carbon nanotubes supported PtRu catalysts for proton exchange membrane fuel cells

A series of PtRu nanocomposites supported on H2O2-oxidized multi-walled carbon nanotubes (MWCNTs) were synthesized via two chemical reduction methods - one used aqueous formaldehyde (HCHO method) and the other used ethylene glycol (EG method) as the reducing agents. The effects of the solvents (water and ethylene glycol) and the surface composition of the MWCNTs on the deposition and the dispersion of the metal particles were investigated using N-2 adsorption. TEM. ICP-AES. FTIR and TPD. The wetting heats of the MWCNTs in corresponding solvents were also measured. The characterizations suggest that combination of the surface chemistry of the MWCNTs with the solvents decides the deposition and the dispersion of the metal nanoparticles. These nanocomposites were evaluated as proton exchange membrane fuel cell anode catalyts for oxidation of 50 ppm CO contaminated hydrogen and compared with a commercial PtRu/C catalyst. The data reveal superior performances for the nanocomposites prepared by the EG method to those by the HCHO method and even to that for tile Commercial analogue. Structure performance relationship of the nanocomposites was also studied. (C) 2005 Elsevier Ltd. All rights reserved.

Preparation of monolithic silica column with strong cation-exchange stationary phase for capillary electrochromatography

A monolithic silica based strong cation-exchange stationary phase was successfully prepared for capillary electrochromatography. The monolithic silica matrix from a sol-gel process was chemically modified by treatment with 3-mercaptopropyltrimethoxysilane followed by a chemical oxidation procedure to produce the desired function. The strong cation-exchange stationary phase was characterized by its substantial and stable electroosmotic flow (EOF), and it was observed that the EOF value of the prepared column remained almost unchanged at different buffer pH values and slowly decreased with increasing phosphate concentration in the mobile phase. The monolithic silica column with strong cation-exchange stationary phase has been successfully employed in the electrochromatographic separation of beta-blockers and alkaloids extracted from traditional Chinese medicines (TCMs). The column efficiencies for the tested beta-blockers varied from 210,000 to 340,000 plates/m. A peak compression effect was observed for atenolol with the mobile phase having a low phosphate concentration.