Measurement of velocity profiles in a rectangular microchannel with aspect ratio α = 0.35

In this work, we measured 14 horizontal velocity profiles along the vertical direction of a rectangular microchannel with aspect ratio alpha = h/w = 0.35 (h is the height of the channel and w is the width of the channel) using microPIV at Re = 1.8 and 3.6. The experimental velocity profiles are compared with the full 3D theoretical solution, and also with a Poiseuille parabolic profile. It is shown that the experimental velocity profiles in the horizontal and vertical planes are in agreement with the theoretical profiles, except for the planes close to the wall. The discrepancies between the experimental data and 3D theoretical results in the center vertical plane are less than 3.6%. But the deviations between experimental data and Poiseuille's results approaches 5%. It indicates that 2D Poiseuille profile is no longer a perfect theoretical approximation since a = 0.35. The experiments also reveal that, very near the hydrophilic wall (z = 0.5-1 mu m), the measured velocities are significantly larger than the theoretical velocity based on the no-slip assumption. A proper discussion on some physical effects influencing the near wall velocity measurement is given.

On a fiber grating sensor system with the capacity of cross-sensitivity discrimination

A novel fiber Bragg grating (FBG) sensor system based on an interrogating technique by two parallel matched gratings was designed and theoretically discussed. With an interrogation grating playing the role of temperature compensation grating simultaneously, the wavelength drifts induced by temperature and strain were discriminated. Additionally, the expressions of temperature and strain were deduced for our solution, and dual-value problem and cross sensitivity were solved synchronously through data processing. The influence of the FBG's parameters on the dynamic range and precision was discussed. Besides, the change of environment temperature cannot influence the dynamic range of the sensor system through temperature tuning. The system proposed in this paper will be of great significance to accelerate the real engineering applications of FBG sensing techniques. (c) 2007 Elsevier GmbH. All rights reserved.

The nuclear matrix of Euglena gracilis (Euglenophyta): A stage of nuclear matrix evolution?

Euglena gracilis cell was extracted sequentially with CSK-Triton buffer, RSB-Magik solution and DNase-As solution. DGD embedment-free electron microscopy showed that in the extracted nucleus there was a residual non-chromatin fibrous network. That it could not be removed by hot trichloroacetic acid further supported the idea that it was a non-histone, non-chromatin fibrous protein network, and should be the internal network of the nuclear matrix. After the sequential extraction, the nuclear membrane was removed, leaving behind a layer of lamina; the chromatin was digested and eluted from the dense chromosomes and residual chromosomal structures that should be chromosomal scaffold were revealed. Western blot analysis with antiserum against rat lamins showed that nuclear lamina of the cell possessed two positive polypeptides, a major one and a minor one, which had molecular masses similar to lamin B and lamin A, respectively. Comparing these data with those of the most primitive eukaryote Archezoa and of higher eukaryotes, it was suggested that the lower unicellular eukaryote E. gracillis already had the nuclear matrix structure, and its nuclear matrix (especially the lamina) might represent a stage of evolutionary history of the nuclear matrix. (C) 2000 Editions scientifiques et medicales Elsevier SAS.

Electroless-plated gold films for sensitive surface plasmon resonance detection of white spot syndrome virus

The paper describes the rapid and label-free detection of the white spot syndrome virus (WSSV) using a surface plasmon resonance (SPR) device based on gold films prepared by electroless plating. The plating condition for obtaining films suitable for SPR measurements was optimized. Gold nanoparticles adsorbed on glass slides were characterized by transmission electron microscopy (TEM). Detection of the WSSV was performed through the binding between WSSV in solution and the anti-WSSV single chain variable fragment (scFv antibody) preimmobilized onto the sensor surface. Morphologies of the as-prepared gold films, gold films modified with self-assembled alkanethiol monolayers, and films covered with antibody were examined using an atomic force microscope (AFM). To demonstrate the viability of the method for real sample analysis, WSSV of different concentrations present in a shrimp hemolymph matrix was determined upon optimizing the surface density of the antibody molecules. The SPR device based on the electroless-plated gold films is capable of detecting concentration of WSSV as low as 2.5 ng/mL in 2% shrimp hemolymph, which is one to two orders of magnitude lower than the level measurable by enzyme-linked immunosorbant assays. (c) 2007 Elsevier B.V. All rights reserved.

Determination of sexual hormones in liquid cosmetics by polymer monolith microextraction coupled with high performance liquid chromatography

A method was presented for the determination of testosterone, methyltestosterone and progesterone in liquid cosmetics by coupling polymer monolith microextraction (PMME) to high performance liquid chromatography with UV detection. A poly (methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column was selected as the extraction medium, which showed high extraction capacity towards these compounds. To achieve optimum extraction performance, several parameters relating to PMME were investigated, including extraction flow rate and pH value, inorganic salt and organic phase concentration of the sample matrix. By simple dilution with phosphate solution and filtering, the sample solution then could be directly injected into the device for extraction. The limits of detection of testosterone, methyltestosterone and progesterone were calculated to be 2, 3, 2, 8 and 4.6 mu g/L. Good linearity was achieved in the range of 10 to 1000 mu g/L with a linear coefficient. r value above 0. 996. Excellent method reproducibility was found by intra- and inter-day precisions, yielding the relative standard deviations of < 7. 7 % and < 7. 5 %, respectively. Recovery for them in the real samples was between 83% and 119%.

The optimization of high performance liquid chromatographic method for analysis of trace microcystins in natural water bodies

The ratio of methanol., water and trifluoroacetic acid ( TFA) was regulated to change the polarity and the pH of the rinse solution and the eluent, so as to improve the high performance liquid chromatography HPLC) detection method for trace microcystines (MCs) in natural water bodies. The results showed that 40 % similar to 45 % methanol-water solution containing 0. 1 % TFA could get good effects on the rinse of impurity, and 70% methanol-water solution containing 0. 1% TFA could elute all the MCs in solid phase extraction ( SPE) cartridge ( C-18), In this way. it is suggested that, in analysis of environmental samples with high concentration of impurity, impurity should be washed with 40% similar to 45% methanol-water solution containing 0. 1% TFA, and MCs should be eluted with 70% similar to 100% methanol-water solution containing 0. 1% TFA.

Nuclear transfer in leach (Paramisgurnus dabryanus Sauvage) by cell-to-cell electrofusion

To study nuclear transfer in the leach (Paramisgurnus dabryanus Sauvage), blastula and gastrula cells were fused with UV-inactivated oocytes by cell-to-cell electrofusion. To facilitate nuclear transfer, blastula and gastrula cells were cultured or incubated at 4 degreesC in different solutions. TC-199 medium supplemented with 20% calf serum was the best culture solution, and effectively retained the totipotence of blastula or gastrula cells for up to 10 days, It was found that gastrula cells incubated at 4 degreesC had the same totipotence as blastula cells, The optimal UV dosage for inactivation of the oocyte chromatin was 180-240 mJ cm(-2). Electrofusion was carried out in a cone-shaped fusion chamber, which permitted the recipient oocyte and the donor blastula cell to contact one another. The electrofusion procedure resulted in a 10% success rate of normal-appearing fish. Genetic analysis indicated that the nuclear material originated from the donor cell (blastomere) and the oocyte pronucleus did not take part in development.

Changing planar thin film growth into self-assembled island formation by adjusting experimental conditions

Illustrated in this paper are two examples of altering planar growth into self-assembled island formation by adapting experimental conditions. Partial oxidation, undersaturated solution and high temperature change Frank-Van der Merwe (FM) growth of Al0.3Ga0.7As in liquid phase epitaxy (LPE) into isolated island deposition. Low growth speed, high temperature and in situ annealing in molecular beam epitaxy (MBE) cause the origination of InAs/GaAs quantum dots (QDs) to happen while the film is still below critical thickness in Stranski-Krastanow (SK) mode. Sample morphologies are characterized by scanning electron microscopy (SEM) or atomic force microscopy (AFM). It is suggested that such achievements are of value not only to fundamental researches but also to spheres of device applications as well. (c) 2004 Elsevier B.V. All rights reserved.

Processing network models of energy/environment systems

Processing networks are a variant of the standard linear programming network model which are especially useful for optimizing industrial energy/environment systems. Modelling advantages include an intuitive diagrammatic representation and the ability to incorporate all forms of energy and pollutants in a single integrated linear network model. Added advantages include increased speed of solution and algorithms supporting formulation. The paper explores their use in modelling the energy and pollution control systems in large industrial plants. The pollution control options in an ethylene production plant are analyzed as an example. PROFLOW, a computer tool for the formulation, analysis, and solution of processing network models, is introduced.

Experimental Investigation into the Production Behavior of Methane Hydrate in Porous Sediment with Hot Brine Stimulation

The gas production behavior from methane hydrate in porous sediment by injecting the brine with the salinity of 0−24 wt % and the temperature of −1 to 130 °C was investigated in a one-dimensional experimental apparatus. The results show that the gas production process consists of three periods: the free gas production, the hydrate dissociation, and the general gas reservoir production. The hydrate dissociation accompanies the temperature decrease with the injection of the brine (NaCl solution), and the dissociation duration is shortened with the increase of the salinity. With the injection of hot brine, instantaneous hydrate dissociation rate also increases with the increase of the salinity. However, while the NaCl concentration is beyond a certain value, the rate has no longer continued increasing. Thermal efficiency and energy ratio for the hydrate production can be enhanced by injecting hot brine, and the enhanced effectiveness is quite good with the injection of high salinity at lower temperature.

Photochromic diarylethene for polarization holographic optical recording

Photochromic diarylethene, 1,2-bis[2-methyl-5-(3-fluorophenyl)-3-thienyl] perfluorocyleopentene (1a), was synthesized. The compound showed good photochromic reactions both in solution and in PMMA matrix by photo-irradiation. Using the diarylethene lb/PMMA film as recording medium and a He-Ne laser for recording and readout, four types of polarization holographic optical recording were accomplished for the first time. The results show that the orthogonal circular polarization recording is the best method for holographic optical recording when the target photochromic diarylethene is used as recording material. (c) 2006 Published by Elsevier B.V.

Measurement of trace phosphorus in dichlorosilane by high-temperature hydrogen reduction gas chromatography

Dichlorosilane, a gas at normal temperature with a boiling point of 8.3 degrees C, is very difficult to sample and detect using conventional methods. We reduced phosphorus in dichlorosilane to PH3 by hydrogen at high temperature, then PH3 was separated from chlorosilanes by NaOH solution and from other hydrides by chromatographic absorption. Thus the problem of interference of chlorosilanes and other hydrides was overcome and PH, was measured by a double flame photometric detector at 526 nm. This method was sensitive, reliable and convenient and the sensitivity reached as low as 0.04 mu g/l.

Choice of calibration equations of the TSM method

For the reciprocal-test fixtures, there are six independent S-parameters to. be determined, and the thru-short-match (TSM) calibration can provide eight calibration equations. In this paper, the relation of calibration equations is investigated. It has been shown that the four equations obtained from the measurement with a transmission standard can be used simultaneously in the calibration. Experimental results show that the different choice of equations will lead to quite different solution, and the calibration accuracy can be improved by taking advantages of the established relation among the calibration equations and properly choosing calibration equations.

5-氟尿嘧啶-β-环糊精结肠靶向前体药物的研究

5-氟尿嘧啶(5-Fluorouracil， 5-FU)是一种抗代谢药物，广泛用于临床治疗结直肠癌、胃癌、乳腺癌等多种癌症，但其首过代谢显著、亲脂性较低，选择性差、毒副作用大。为克服这些缺点人们对5-FU进行了大量的修饰工作，包括小分子修饰以及与各种载体形成微球、微囊、纳米粒、共价前药等。 环糊精(Cyclodextrin，简称CD)，可被结肠中的糖苷酶特异性地降解成小分子糖，而胃和小肠中由于缺乏相应的酶而使环糊精不被降解，这一特性在结肠药物的靶向输送及释放中有重要应用价值。环糊精中含有丰富的羟基，易进行化学修饰，将药物与环糊精通过共价键结合制成前药，使其在胃和小肠中不降解，而在盲结肠中被特异性的酶降解释出药物，达到结肠靶向释药的目的。研究表明，环糊精作为一种前药载体为结肠靶向释药和缓释、控释系统提供了一种有效的手段。 本工作选择5-氟尿嘧啶为模型药物、β-环糊精作为载体，通过中间体5-FU羧酸衍生物的制备及其与β-环糊精的偶联，合成了系列5-FU-β-CD前体药物，并利用紫外、红外、质谱、核磁、元素分析、热分析等手段对其进行结构表征。同时，还研究了前体药物的体外释药性质。具体内容包括： 1. 含有羧基的5-FU衍生物中间体的合成：(5-氟尿嘧啶-1-基)-乙酸(FUAC)、3-(5-氟尿嘧啶-1-基)-丙酸(FUPC)、5-(5-氟尿嘧啶-1-基)-戊酸(FUVC)的合成。 2. 中间体5-FU的羧酸衍生物与β-CD的偶联：分别通过以6-OTs-β-CD为中间体的取代法和活化酯法，合成了第一面取代和第二面取代的5-FU-β-CD大分子前体药物。在二面取代的前体药物制备中，通过改变原料的比例，合成了系列不同取代度(DS)的2-[(5-氟尿嘧啶-1-基)-乙酰基] -β-环糊精结合物。 3. 对上述前体药物进行体外释放研究：分别考察了前体药物在不同pH缓冲溶液中的水解行为及其在小鼠胃肠道人工体液中的酶解行为，并通过UV-Vis及HPLC对前体药物释放情况进行检测分析。 5-Fluorouracil(5-Fu), commonly known as a broad-spectrum antineoplastic drug, has been widely used in the treatment of various kinds of cancer including colon cancer for 40 years. However, this antitumor agent exhibits serious adverse effects, such as their marrow toxicity, gastrointestinal reaction and low selectivity in their clinical use. In order to improve its antitumor activity and reduce its toxicity, the compound was modified in various ways, including the formation of conjugated prodrugs with kinds of carrier, microsphere and nanoparticles etc. Cyclodextrins(CDs) are known to be barely capable of being hydrolyzed and only slightly absorbed in passing through the stomach and small intestine; however they are fermented into small saccharides by colonic microflora and thus absorbed as small saccharides in the large intestine. This biodegradation property of CDs may be useful as a colon-targeting carrier, and thus CD prodrugs may serve as a source of site-specific delivery of drugs to colon. It was demonstrated that prodrugs of CDs can provide a versatile means for construction of not only colon targeted delivery systems, but also delayed release systems. 5-Fluorouracil was taken as a model drug and β-CD as the carrier in this study. Series prodrugs of 5-FU was prepared through the preparation of reactive 5-FU derivatives containing carboxyl group and coupling to hydroxyl groups of CD. The structures of the conjugates were charactered by using IR, UV–vis, ESI-MS, 1H, 13C-NMR spectra, elemental analyses, and thermal analysis. In vitro hydrolysis behavior in aqueous solution and in rat gastrointestinal tract contents of the conjugates were also investigated. The main content of this dissertation includes following aspects: 1. The preparation of 5-FU derivatives containing carboxyl group: 5-Fluorouracil- acetic acid(FUAC)、3-(5-FU-1)-propionic acid (FUPC)、and 5-(5-FU-1)-valeric acid(FUVC). 2. The coupling of 5-FU derivatives to β-CD: 5-FU was selectively conjugated onto the primary or secondary hydroxyl groups of β-CD through an ester linkage, by the substitution of 6-OTs-β-CD and the activated ester method respectively. For the secondary face conjugation, the degree of substitution(DS) can be controlled by changing the mole ratio of the starting materials(FUAC and β-CD). 3. In vitro release behavior of the conjugates in aqueous solution and in rat gastro- intestinal tract contents of the conjugates were investigated, and the reaction was monitored and analyzed by using UV-Vis and HPLC methods.