Sequence variations of the S7 ribosomal protein gene in primitive cyprinid fishes: Implication on phylogenetic analysis

Cyprinidae is the largest fish family in the world and contains about 210 genera and 2010 species. Appropriate DNA markers must be selected for the phylogenetic analyses of Cyprinidae. In present study, the 1st intron of the S7 ribosomal protein (r-protein) gene is first used to examine the relationships among cyprinid fishes. The length of the 1st intron obtained by PCR amplification ranges from 655 to 859 by in the 16 cyprinid species investigated, and is 602 by in Myxocyprinus asiaticus. Out of the alignment of 925 nucleotide sites obtained, the parsimony informative sites are 499 and occupy 54% of the total sites. The results indicate that the 1st intron sequences of the S7 r-protein gene in cyprinids are rich in informative sites and vary remarkably in sequence divergence from 2.3% between close species to 66.6% between distant species. The bootstrap values of the interior nodes in the NJ (neighbor-joining) and MP (most-parsimony) trees based on the present S7 r-protein gene data are higher than those based on cytochrome b and the d-loop region respectively. Therefore, the 1st intron sequences of the S7 r-protein gene in cyprinids are sensitive enough for phylogenetic analyses, and the 1st intron is an appropriate genetic marker for the phylogenetic reconstruction of the taxa in different cyprinid subfamilies. However, attempts to discuss whether the present S7 r-protein gene data can be applied to the phylogeny of the taxa at the level of the family or the higher categories in Cypriniformes need further studies.

Mitochondrial DNA sequence variations and systematics of the genus Distoechodon (Teleostei : Cyprinidae)

In the present paper, nucleotide sequences (925-929 bases) of the mitochondrial D-loop region and complete cytochrome b gene (1140 bases) were determined and analysed to investigate the systematic status of the genus Distoechodon . CSB1, CSB2, CSB3, CSB-D and ETAS were successfully identified in the D-loop region. The sequence variations among different samples suggest that Distoechodon compressus is a valid species and has its distribution in Taiwan, and that D. tumirostris multispinnis does not seem to be a valid species.

Mitochondrial cytochrome b sequence variations and phylogeny of the East Asian bagrid catfishes

The mitochondrial DNA cytochrome b gene was sequenced from 8 bagrid catfishes in China. Aligned with cytochrome b sequences from 9 bagrid catfishes in Japan, Korea and Russia retrieved from GenBank, and selected Silurus meridionalis, Liobagrus anguillicauda, Liobagrus reini and Phenacogrammus interruptus as outgroups, we constructed a matrix of 21 DNA sequences. The Kimura's two-parameter distances were calculated and molecule phylogenetic trees were constructed by using the maximum parsimony (MP) and neighbor-joining (NJ) methods. The results show that (i) there exist 3-bp deletions of mitochondrial cytochrome b gene compared with cypriniforms and characiforms; (ii) the molecular phylogenetic tree suggests that bagrid catfishes form a monophyletic group, and the genus Mystus is the earliest divergent in the East Asian bagrid catfishes, as well as the genus Pseudobagrus is a monophyletic group but the genus Pelteobagrus and Leiocassis are complicated; and 60 the evolution rate of the East Asian bagrids mitochondrial cytochrome b gene is about 0.18%-0.30% sequence divergence per million years.

Sequence variations in the mitochondrial DNA control region and their implications for the phylogeny of the Cypriniformes

The mitochondrial DNA control region of six cobitids and two catostomids was sequenced and compared with sequences of other cypriniforms to study their sequence variations. The extended termination associated sequence (ETAS) domain, central domain, and conserved sequence block (CSB) domain were partitioned and the ETAS sequence, CSB-D, CSB-E, ECSB-F, CSB1, CSB2, and CSB3 were identified. It is suggested that the "hairpin" TACAT-ATGTA is the key sequence of ETAS and GACATA is the symbol of CSB1. Phylogenetic analysis based on the CSB domain showed that all cyprinids evolved as one monophyletic group, while the non-cyprinid Cypriniformes could be another monophyly that is in accordance with the hypothesis proposed by Siebert. Further analysis of the phylogeny of the Cobitoidei was also conducted and it is tentatively suggested that their relationships are Catostomidae + (Gyrinocheilidae + (Botiinae + (Homalopteridae + (Cobitinae + Nemacheilinae)))).

Complete nucleotide sequence of the S10 genome segment of grass carp reovirus (GCRV)

Hemorrhagic disease, caused by the grass carp reovirus (GCRV), is one of the major diseases of grass carp in China. Little is known about the structure and function of the gene segments of this reovirus. The S10 genome segment of GCRV was cloned and the complete nucleotide sequence is reported here. The S10 is 909 nucleotides long and contains a large open reading frame (ORF) encoding a protein of 276 amino acids with a deduced molecular weight of approximately 29.7 kDa. Comparisons of the deduced amino acid sequence of GCRV S10 with those of other reoviruses revealed no significant homologies. However, GCRV S10 shared a putative zinc-finger sequence and a similar distribution of hydrophilic motifs with the outer capsid proteins encoded by Coho salmon aquareovirus (SCSV) S10, striped bass reovirus (SBRV) S10, and mammalian reovirus (MRV) S4. It was predicted that this segment gene encodes an outer capsid protein.

Sequence of genome segments 1, 2, and 3 of the grass carp reovirus (Genus Aquareovirus, family Reoviridae)

The genome segments 1, 2, and 3 of the grass carp reovirus (GCRV), a tentative species assigned to genus Aquareouirus, family Reouiridae, were sequenced. The respective segments 1, 2, and 3 were 3949, 3877, and 3702 nucleotides long. Conserved moths 5' (GUUAUUU) and 3' (UUCAUC) were found at the ends of each segment. Each segment contains a single ORF and the negative strand does not permit identification of consistent ORFs. Sequence analysis revealed that VP2 is the viral polymerase, while VPI might represent the viral guanyly/methyl transferase (involved in the capping process of RNA transcripts) and VP3 the NTPase/helicase (involved in the transcription and capping of viral RNAs), The highest amino acid identities (26-41%) were found with orthoreovirus proteins. Further genomic characterization should provide insight about the genetic relationships between GCRV, aquareoviruses, and orthoreoviruses, It should also permit to precise the taxonomic status of these different viruses. (C) 2000 Academic Press.

Molecular phylogenetic systematics of twelve species of acipenseriformes based on mtDNA ND4L-ND4 gene sequence analysis

Acipenseriformes is an endangered primitive fish group, which occupies a special place in the history of ideas concerning fish evolution, even in vertebrate evolution. However, the classification and evolution of the fishes have been debated. The mitochondrial DNA (mtDNA) ND4L and partial ND4 genes were first sequenced in twelve species of the order Acipenseriformes, including endemic Chinese species. The following points were drawn from DNA sequences analysis: (i) the two species of Huso can be ascribed to Acipenser; (ii) A. dabryanus is the mostly closely related to A. sinensis, and most likely the landlocked form of A. sinensis; (iii) genus Acipenser in trans-Pacific region might have a common origin; (iv) mtDNA ND4L and ND4 genes are the ideal genetic markers for phylogenetic analysis of the order Acipenseriformes.

Chromosomal in situ hybridization of Cyprinus carpio genomic DNA repetitive sequence CR1

Common carp Cyprinus carpio genomic DNA repetitive sequence CR1 has been DIG-labeled and hybridized in situ against chromosomes of red common carp (Cyprinus carpio L. Xingguo red var.). It is found that the repetitive sequence CR1 is mainly localized at the centromeric regions of chromosomes of the red common carp, The application of the chromosomal in situ hybridization technique on fish and the relationship between CR1 repetitive sequence distribution and its function have been discussed.

Periodic bubble emission and appearance of an ordered bubble sequence (train) during condensation in a single microchannel

Condensation of steam in a single microchannel, silicon test section was investigated visually at low flow rates. The microchannel was rectangular in cross-section with a depth of 30 pm, a width of 800 mu m and a length of 5.0 mm, covered with a Pyrex glass to allow for visualization of the bubble formation process. By varying the cooling rate during condensation of the saturated water vapor, it was possible to control the shape, size and frequency of the bubbles formed. At low cooling rates using only natural air convection from the ambient environment, the flow pattern in the microchannel consisted of a nearly stable elongated bubble attached upstream (near the inlet) that pinched off into a train of elliptical bubbles downstream of the elongated bubble. It was observed that these elliptical bubbles were emitted periodically from the tip of the elongated bubble at a high frequency, with smaller size than the channel width. The shape of the emitted bubbles underwent modifications shortly after their generation until finally becoming a stable vertical ellipse, maintaining its shape and size as it flowed downstream at a constant speed. These periodically emitted elliptical bubbles thus formed an ordered bubble sequence (train). At higher cooling rates using chilled water in a copper heat sink attached to the test section, the bubble formation frequency increased significantly while the bubble size decreased, all the while forming a perfect bubble train flowing downstream of the microchannel. The emitted bubbles in this case immediately formed into a circular shape without any further modification after their separation from the elongated bubble upstream. The present study suggests that a method for controlling the size and generation frequency of microbubbles could be so developed, which may be of interest for microfluidic applications. The breakup of the elongated bubble is caused by the large Weber number at the tip of the elongated bubble induced by the maximum vapor velocity at the centerline of the microchannel inside the elongated bubble and the smaller surface tension force of water at the tip of the elongated bubble.