稀土掺杂氟化镁钾纳米晶的合成及其光谱特性

采用微乳液法合成了Eu2+,Ce3+单掺和双掺KMgF3纳米晶,分析了样品的结构与形态.结果表明,所合成的样品均为单相,颗粒粒度分布均匀.讨论了光谱特性并与高温固相法合成的产物作了对比.研究发现,在KMgF3纳米晶双掺体系中,由于Eu2+和Ce3+竞争吸收激发能,只能观察到Ce3+的发射带;而在KMgF多晶共掺体系中,因为存在Ce3+→Eu2+能量传递过程,只能观察到Eu2+的发射峰.

Morphology, structure, and properties of in situ compatibilized linear low-density polyethylene/polystyrene and linear low-density polyethylene/high-impact polystyrene blends

Blends of linear low-density polyethylene (LLDPE) with polystyrene (PS) and blends of LLDPE with high-impact polystyrene (HIPS) were prepared through a reactive extrusion method. For increased compatibility of the two blending components, a Lewis acid catalyst, aluminum chloride (AlCl3), was adopted to initiate the Friedel-Crafts alkylation reaction between the blending components. Spectra data from Raman spectra of the LLDPE/PS/AlCl3 blends extracted with tetrahydrofuran verified that LLDPE segments were grafted to the para position of the benzene rings of PS, and this confirmed the graft structure of the Friedel-Crafts reaction between the polyolefin and PS. Because the in situ generated LLDPE-g-PS and LLDPE-g-HIPS copolymers acted as compatibilizers in the relative blending systems, the mechanical properties of the LLDPE/PS and LLDPE/HIPS blending systems were greatly improved. For example, after compatibilization, the Izod impact strength of an LLDPE/PS blend (80/20 w/w) was increased from 88.5 to 401.6 J/m, and its elongation at break increased from 370 to 790%. For an LLDPE/HIPS (60/40 w/w) blend, its Charpy impact strength was increased from 284.2 to 495.8 kJ/m(2). Scanning electron microscopy micrographs showed that the size of the domains decreased from 4-5 to less than 1 mum, depending on the content of added AlCl3.

TiO2-SnO2复合凝胶的结构表征及其吸附与催化性能研究

中国科学院山西煤炭化学研究所

End-column amperometric detection of aesculin and aesculetin by capillary electrophoresis

Determination of aesculin (AL) and aesculetin (AT) by capillary electrophoresis with end-column amperometric detection using a 33 mu m microdisk carbon fiber electrode is described. The HDVs, the effect of pH, buffer concentration, injection voltage, injection time and separation voltage on the peak current response (i(p)) of the analytes and the number of theoretical plates (N) were studied. The method has high sensitivity and good reproducibility. Under the optimum condition - 10 mM, pH 9.00 phosphate buffer, 4 s at 9 kV injection, separation at 15 kV and +1.0 V as the detection potential - low detection limits (S/N = 3) of 0.06 and 0.3 mu M were obtained for AL and AT, respectively. The calibration curve was linear over three orders of magnitude. The relative standard deviations (n = 15) of peak current and migration time were 3.9% and 4.6%, and 0.96% and 0.75% for 15 consecutive injections of 5 mu M AL and AT, respectively. The use of this method for the separation and detection of the two compounds present in the traditional Chinese medicine and human urine samples is also reported. (C) 1999 Elsevier Science B.V. All rights reserved.

丁苯橡胶的阳离子环化

应用一氯二乙基铝和苄基氯催化剂体系进行了丁苯橡胶的阳离子环化反应。研究了反应温度、苄基氯/ 一氯二乙基铝比例、溶剂、原胶浓度对环化的影响。发现通过控制苄基氯/ 一氯二乙基铝比，可在高温(120℃) 、高原胶浓度(2～4%w/v)下进行丁苯橡胶的环化，制得特性粘度较原胶有大幅度降低，可溶性无凝胶的环化丁苯胶。通过对红外光谱、1H-NMR谱的初步解析，证实了环化反应的发生。

Linear and nonlinear optical properties of KNbO3

Linear and nonlinear optical (NLO) properties of KNbO3 in various phases are calculated from their crystal structures. Nonlinear optical tensor coefficients are found to be very sensitive to the atomic geometry, changing as much as 85% between the ferroelectric tetragonal and rhombohedral phases. The predicted principal refractive indices are also found to be sensitive to their structural changes. In the tetragonal phase KNbO3 has the largest NLO responses, in the orthorhombic phase KNbO3 has the relative larger NLO coefficients, and in the rhombohedral structure KNbO3 has the large and homogeneous NLO properties. (C) 1998 Elsevier Science B.V. All rights reserved.

Efficient synthesis and facile polymerization of some cyclic bisphenol o-phthalates

A series of new macrocyclic aromatic esters have been efficiently synthesized from o-phthaloyl dichloride and various bisphenols, and unambiguously characterized by a combination of GPC, MS(FAB), FTIR and NMR. These macrocyclic oligomers undergo facile ring-opening polymerization in the presence of anionic initiators to give high molecular weight polyarylates.

限定有害杂质极限含量的超高纯氧化钇的研制

高纯氧化钇（Ｙ２Ｏ３）作为ＹＡ系列激光晶体的重要原材料具有广泛的应用前景。限定有害杂质并使其低于极限含量的超高纯Ｙ２Ｏ３的研究是提高ＹＡＧ、ＹＡＰ、ＹＶＯ４等激光晶体质量、发展其他微电子、光电子材料的迫切需求，也是当前国内外十分关注的研究课题。研制在超净的工作环境下，采用改进的离子交换技术，并设法克服由于使用超细树脂而产生的阻力大、流速低，周期长的缺点。通过改变设备的长径比例和体积比例，实现大体积低浓度条件下的除杂工艺，并与络合、沉淀等多种方法联用的综合化学法，逐步去除Ｙ２Ｏ３中的稀土和非稀土杂质，使其达

Isothermal crystallization studies on neodymium oxide filled nylon 6

Melt mixing of nylon 8 with neodymium oxide particles was carried out with a single-screw extruder. The crystal behaviors of plain nylon 6 and the neodymium oxide filled nylon 6 mixture were studied by means of isothermal crystallization kinetic analysis. Isothermal crystallization thermograms obtained by differential scanning calorimetry (DSC) were analyzed based on the Avrami equation. The neodymium oxide particles acted as a nucleating agent in the mixture. The overall rate of di-isothermal crystallization of the neodymium oxide filled nylon 6 mixture is higher than that of plain nylon 6. The mechanism and modes of plain nylon 6 were the same as those of neodymium oxide filled PA6 mixture.

杂多化合物—聚吡咯膜修饰电极的制备及电化学研究

报道四元杂多化合物Ｋ１０Ｈ３［Ｎｄ（ＳｉＭｏ７Ｗ４Ｏ３９）２］·ｘＨ２Ｏ（简写为Ｎｄ（ＳｉＭｏ７Ｗ４）２１３－）聚吡咯（ＰＰｙ）膜修饰电极的制备及其电化学性能．该电极保持了四元杂多化合物的电化学活性和电催化性能，并具有很好的稳定性，在酸性水溶液中对ＮＯ－２具有明显的催化作用．

Pt／C－SPE和PtRu／C－SPE膜电极上甲醇的催化氧化

采用化学还原法制得直接甲醇燃料电池中甲醇阳极氧化的Ｐｔ／Ｃ和ＰｔＲｕ／Ｃ催化剂．结果表明后者比前者具有更高的催化活性．通过ＸＲＤ和ＸＰＳ的分析，阐明了Ｒｕ对提高甲醇电催化氧化活性的作用．

{[Sm_2(Gly)_6(H_2O)_4](ClO_4)_6(H_2O)_5}_n的合成和晶体结构

本文合成了标题配合物,对其红外光谱进行了研究.测定了配合物的晶体结构,结果表明,晶体属三斜晶系,P1空间群,单胞参数:α=11.549(2)(?),b=14.122(3)(?),c=15.654(?),α=97.01(2)°,β=102.70(2)°,γ=105.43(2)°,V=2355.94(0.87)(?)~3,Z=2.晶体结构是采用Patterson法和差值Fourier合成解出.经全矩阵最小二乘法修正,最后偏差因子R=0.0337,R_w=0.0364.晶体中甘氨酸与Sm原子的结合方式有三种:第一种甘氨酸的羧基离子以螯合桥式与Sm原子配位;第二种甘氨酸以羧基桥式与同一单元的两个Sm原子配位;第三种甘氨酸以酸基桥式连结两个相邻单元中的相邻Sm原子而形成一维无限长链结构.此外,每个Sm原子还与两个水分子成键,其配位数为9.

铽芳香族羧酸配合物的热分解机理及动力学研究

本文采用TG-DTA-DTG等技术研究了铽羧酸配合物的热分解过程,通过对中间产物进行红外光谱、元素分析、确定了热分解机理。采用三种方法尝试求得了希土羧酸配合物热分解过程的活化能和焓变,发现并总结了其相变过程。

P wave velocity of the pumice from the Okinawa Trough at high temperature and high pressure.

P wave velocity of the pumice sample from the middle Okinawa Trough and andesite sample from vicinity Yingdao volcanic island, Kyushu Japan were measured at temperature (from room temperature to 1500 C) and pressure (from room pressure to 2.4GPa) using a multi-anvil pressure apparatus called the YJ-3000 press. The measured data shows that at low temperature and low pressure (<1GPa, <800degreesC), the P wave velocity of pumice is lower than that of andesite, while at high temperature and high pressure (>1GPa, >800degreesC) the P wave velocity of pumice and andesite. becomes consistent (5.9km/s). The paper points out that 1GPa/800degreesC is the point of thermodynamic phase transformation Okinawa Trough pumice and vicinity andesite, and the point is deeper than 18km.

Authigenic sulfide minerals and their sulfur isotopes in sediments of the northern continental slope of the South China Sea and their implications for methane flux and gas hydrate formation

This is a report of the study of the authigenic sulfide minerals and their sulfur isotopes in a sediment core (NH-1) collected on the northern continental slope of the South China Sea, where other geophysical and geochemical evidence seems to suggest gas hydrate formation in the sediments. The study has led to the findings: (1) the pyrite content in sediments was relatively high and its grain size relatively large compared with that in normal pelagic or hemipelagic sediments; (2) the shallowest depth of the acid volatile sulfide (AVS) content maximum was at 437.5 cm (> 2 mu mol/g), which was deeper than that of the authigenic pyrite content maximum (at 141.5-380.5 cm); (3) delta S-34 of authigenic pyrite was positive (maximum: +15 parts per thousand) at depth interval of 250-380 cm; (4) the positive delta S-34 coincided with pyrite enrichment. Compared with the results obtained from the Black Sea sediments by Jorgensen and coworkers, these observations indicated that at the NH-1 site, the depth of the sulfate-methane interface (SMI) would be or once was at about 437.5-547.5 cm and the relatively shallow SMI depth suggested high upward methane fluxes. This was in good agreement with the results obtained from pore water sulfate gradients and core head-space methane concentrations in sediment cores collected in the area. All available evidence suggested that methane gas hydrate formation may exist or may have existed in the underlying sediments.