藻体对水环境中N、P及重金属Cu2+、Pb2+、Cd2+、Cr6+的吸附特征研究

随着全球生态环境的恶化，各国日益重视对水体中各种污染物的治理。利用藻类的吸收、富集和降解作用，可以去除污水中的营养物质、重金属离子和有机污染物，与其他物理、化学及工程的方法相比，该技术具有以下优点：成本低、能耗小、治理效果较好，对环境污染小，有利于资源化，有利于整体生态环境的改善，是治理水质污染的新途径。 本文利用几种大型海藻对富营养化海水进行处理，结果发现孔石莼、刚毛藻均有很强的吸收N、P的能力，吸收能力依次为褶曲刚毛藻>束生刚毛藻>孔石莼。水体中褶曲刚毛藻3 g/L含量，在3～5小时之内，可把中等以上富营养化海水中的N、P降低至一类海水水平。利用刚毛藻处理富营养化地下海水和养殖废水，进行海参和大菱鲆养殖试验，探索藻类净化水质和废水循环利用的新模式，使水体保持较低的营养盐状态，减轻养殖废水对环境的影响，实现了海水养殖业与环境的可持续发展。 刚毛藻在我国近海滩涂分布广泛，利用它来处理富营养化水体，并和水产养殖业相结合，既净化水体，使养殖废水能循环利用，满足水产养殖的需求，又改善水产业生态环境。同时，将回收藻体生产优质饲料、食品和药物等，实现藻类资源的高值利用。刚毛藻营养丰富，用其替代鼠尾藻作海参饲料，资源丰富，成本低，效果好，是一种值得加以开发利用的宝贵资源，具有广泛的应用前景。 生物吸附法是一种经济有效的移除废水中有害重金属离子的方法。由于藻类细胞壁中的多聚糖可提供吸附重金属的位点，廉价而蕴藏丰富的海藻对多种重金属表现出很强的吸附能力。所以本文通过分批实验，研究了非活体刚毛藻对水体中重金属Cu2+、Pb2+和Cd2+的吸附影响因子、吸附热力学、吸附动力学及吸附机理，得到了平衡等温线及动力学数据。吸附过程的最佳pH值为5.0，吸附量随温度的升高而增加，水体中常见的Na+、K+、Ca2+、Mg2+阳离子及Cl-、NO3-、SO42-、C2O42-等阴离子的存在对吸附的影响并不显著。EDTA存在时，吸附百分率大大降低。吸附等温线符合Langmuir和Freundlich方程。刚毛藻对重金属Cu2+、Pb2+和Cd2+的吸附容量很高，25℃时，对Cu2+、Pb2+和Cd2+的最大吸附容量分别为1.61 mmol/g、0.96 mmol/g和0.98 mmol/g，且吸附过程为吸热反应。刚毛藻对重金属Cu2+、Pb2+和Cd2+的吸附过程为化学吸附，在吸附过程中藻体表面的官能团可能与金属离子发生了螯合作用。吸附动力学过程符合pseudo-二级动力学模型，在初始的30min内，吸附速率很快，随后速率逐渐降低。解吸试验表明，用EDTA可以对重金属进行回收，刚毛藻可以循环利用。实验结果表明刚毛藻是一种高效、经济实用的生物吸附材料，可用来吸附回收水体中的重金属Cu2+、Pb2+和Cd2+等。 通过非活体刚毛藻对重金属Cr6+的吸附影响因子、吸附动力学、吸附机理的研究发现，刚毛藻对Cr6+具有很强的还原能力，对电镀废水中的Cr6+的还原去除提供了非常好的方法。吸附过程的最佳pH值为2～3，实际电镀废水通常在此pH范围，因此处理实际废水时，首先在原酸性条件下，对Cr6+进行还原去除，然后调废水pH至5.0，继续进行吸附，去除其他二价离子及被还原的三价Cr离子，实现了利用同一材料还原Cr6+为Cr3+，并将Cr3+和其他重金属离子同时去除。通过对机理的讨论，认为刚毛藻对Cr6+的生物吸附过程不是一个简单的“离子交换过程”，而是一个“吸附还原过程”。在海藻量足够的前提下，只要时间足够长，Cr6+可被彻底还原去除。 利用工业废弃物褐藻渣，对水体中重金属离子Cu2+、Pb2+、Cd2+及Cr6+的生物吸附特性分别进行了讨论，结果表明褐藻渣对重金属离子的吸附特性与刚毛藻一致，吸附等温线符合Langmuir和Freundlich方程，在25℃时，pH为5.0时，由Langmuir方程求出褐藻渣对Cu2+、Pb2+和Cd2+的最大吸附容量分别为4.20 mmol/g、3.13 mmol/g和2.97 mmol/g。褐藻渣对低、高浓度的重金属Cr6+都具有很强的吸附能力，且移除效果比较彻底。实际应用结果表明，褐藻渣是一种高效、经济实用的生物吸附材料，可用来吸附回收水体中的重金属离子，具有广泛的应用前景。

Environmental changes reflected by sedimentary geochemistry in recent hundred years of Jiaozhou Bay, North China

Sediment geochemical technique was employed to assess how the sediment records reflect the environmental changes of Jiaozhou Bay, a semi-enclosed bay adjacent to Qingdao, China. In the past hundred years, Jiaozhou Bay has been greatly impacted by human interventions. A dated core sediment by Pb-210 chronology was analyzed for trace metals including Li, Cd, Cr, Pb, Cu, Ni, Co, Zn together with C, N, P and BSi. Based on the research, the development of Jiaozhou Bay environment in the past hundred years can be divided into three stages: (1) before the 1980s characterized by relatively low sedimentation rate, weak heavy metal pollution and scarce eutrophication; (2) from the 1980s to 2000, accelerating in the 1990s, during which high sedimentation rates, polluted by heavy metals and the frequent occurrence of red tide; (3) after 2000, the period of the improvement of environment, the whole system has been meliorated including the heavy metal pollution and hypernutrification. (c) 2006 Elsevier Ltd. All rights reserved.

Community structure of macrobenthos in coastal water off Rushan, southern Shandong Peninsula, and the relationships with environmental factors

To understand the present actuality of the marine ecosystem in the southern coastal water region of the Shandong Peninsula and the impact of the global change and the human activities to the marine ecosystem of the region, the macrobenthic community structure was researched based on data from 26 sampling stations carried out on four seasonal cruises from December 2006 to November 2007. The data was analyzed using PRIMER 6.0 and SPSS 15.0 software packages. The results showed that 236 macrobenthic species in total were collected from the research region by the field works. Most of the species belong to Polychaeta (76 species), Mollusca (75) and Crustacea (60). Of which, 33 species were common species by the four cruises. The dominant species were different among the four seasons, however, the polychaete species Nephtys oligobranchia and Sternaspis scutata were always dominant in the four seasons. The abundances and biomasses of the macrobenthos from the research region were variable in tire four seasons. The results of CLUSTER and MDS analysis showed that the similarities of macrobenthic structures among the stations were low, most of the similarities were at about 40% of similarity values, only that of two stations were up to 60%. In accordance with the similarity values of the macrobenthic structures, the 26 stations were clustered as six groups at arbitrary similarity level of 30%. The ABC curve indicated that the marcofauna communities in the research region had riot been disturbed distinctly. The results of BIOENV and BVSTEP (Spearman) analysis implied that the concentrations of organic matter in bottom water and heavy metal copper in sediment, water depth and temperature of bottom were the most significant environmental factors to affect the macrobentic community.

Biosorption of copper (II) and lead (II) from aqueous solutions by nonliving green algae Cladophora fascicularis: Equilibrium, kinetics and environmental effects

Biosorption of Cu2+ and Pb2+ by Cladophora fascicularis was investigated as a function of initial pH, initial heavy metal concentrations, temperature and other co-existing ions. Adsorption equilibriums were well described by Langmuir and Freundlich isotherm models. The maximum adsorption capacities were 1.61 mmol/ g for Cu2+ and 0.96 mmol/ g for Pb2+ at 298K and pH 5.0. The adsorption processes were endothermic and biosorption heats calculated by the Langmuir constant b were 39.0 and 29.6 kJ/ mol for Cu2+ and Pb2+, respectively. The biosorption kinetics followed the pseudo- second order model. No significant effect on the uptake of Cu2+ and Pb2+ by co-existing cations and anions was observed, except EDTA. Desorption experiments indicated that Na(2)EDTA was an efficient desorbent for the recovery of Cu2+ and Pb2+ from biomass. The results showed that Cladophora fascicularis was an effective and economical biosorbent material for the removal and recovery of heavy metal ions from wastewater.

Meat characteristics of Qinghai yak and semi-wild yak

Six domestic yaks aged 6 years, comprising three culling male and three culling female yaks, from the Qinghai Lake area and three male semi-wild yaks aged 6 months from Datong Yak Farm were used to detect the levels of amino acids, mineral elements, residual heavy metals and pesticides in yak meat. The results showed that there was little difference in amino acid levels for different types of yak by age and sex. The meat of the adult male yak was 7.35 mg/kg higher in calcium (P < 0.05) and 124 mg/kg higher in phosphorus (P < 0.01) than that of the adult female yak. There was an obvious difference in zinc content, and there was also a significant difference for copper and sulfur between adult male and female yaks (P < 0.01). Iron was 8.85 mg/kg higher in semi-wild yaks than in domestic yaks, but there were no differences for other minerals. The levels of residual heavy metals and residual pesticides were well within those allowed by the National Standard of China. Furthermore, the data showed that introducing wild yak's blood did not result in a quality change in the domestic yak meat. Yak meat from Qinghai Plateau has the characteristics of being non-polluted and rich in amino acids in comparison with local yellow cattle meat.

植物对环境污染的磁学响应机理研究

With development of industry and acceleration of urbanization, problems of air quality as well as their influences on human health have recently been regarded highly by current international communities and governments. Generally, industrializations can result in exhausting of a lot of industry gases and dusts, while urbanization can cause increasing of modern vehicles. Comparing with traditional chemical methods, magnetic method is simple, rapid, exact, low-cost and non-destructive for monitoring air pollution and has been widely applied in domestic and international studies. In this thesis, with an aim of better monitoring air pollution, we selected plants (highroad-side perennial pine trees (Pinus pumila Regel) along a highroad linking Beijing City and the Capital International Airport, and tree bark and tree ring core samples (willow, Salix matsudana) nearby a smelting industry in northeast Beijing) for magnetic studies. With systemic magnetic measurements on these samples, magnetic response mechanism of contamination（e.g. tree leaves, tree ring）to both short- and long-term environmental pollution has been constructed, and accordingly the pollution range, degree and process of different time-scale human activities could be assessed. A series of rock magnetic experiments of tree leaves show that the primary magnetic mineral of leaf samples was identified to be magnetite, in pseudo-single domain (PSD) grain size range of 0.2-5.0 μm. Magnetite concentration and grain size in leaves are ascertained to decrease with increasing of sampling distance to highroad asphalt surface, suggesting that high magnetic response to traffic pollution is localized within a distance of about 2 m away from highroad asphalt surface. On the other hand, highroad-side trees and rainwater can effectively reduce the concentration of traffic pollution-induced particulate matters (PMs) in the atmosphere. This study is the first time to investigate the relationship of smelting factory activities and vicissitudes of environment with tree rings by magnetic methods. Results indicate that magnetic particles are omnipresent in tree bark and trunk wood. Magnetic techniques including low-temperature experiment, successive acquisition of IRM, hysteresis loops and SIRM measurements suggest that magnetic particles are predominated by magnetite in pseudo-single domain state. Comparison of magnetic properties of tree trunk and branch cores collected from different directions and heights implies that collection of magnetic particles depends on both sampling direction and height. Pollution source-facing tree trunk wood contains significantly more magnetic particles than other sides. These indicate that magnetic particles are most likely intercepted and collected by tree bark first, then enter into tree xylem tissues by translocation during growing season, and are finally enclosed in a tree ring by lignifying. Correlation between magnetic properties such as time-dependent SIRM values of tree ring cores and the annual steel yields of the smelting factory is significant. Considering the dependence of magnetic properties in sampling directions, heights, and ring cores, we proposed that magnetic particles in the xylem cannot move between tree rings. Accordingly, the SIRM and some other magnetic parameters of tree ring cores from the source-facing side could be contributed to historical study of atmospheric pollution produced by heavy metal smelting activities, isoline diagrams of SIRM values of all the tree rings indicate that air pollution is increasing worse. We believed that a synthetic rock magnetic study is an effective method for determining concentration and grain size of ferromagnets in the atmospheric PMs, and then it should be a rapid and feasible technique for monitoring atmospheric pollution.

高温实验中重金属钼在硅酸盐熔体中的含量研究

This dissertation discusses current status of high temperature and high pressure and focuses on analyzing systematically the solubility of heavy metals in the silicate magma in HTHP experiments. The high temperature study on the content of heavy metal molybdenum in the silicate melts in this dissertation, which is granted, based on the geology mineralization model and the theory of HTHP experiments and combined with mineralization grade and geochemical nature of Mo, discusses the difference of mineralization between mantle plume and aqueous fluids and comes to the conclusions, which are as follows: (1) The content of Mo in the silicate melts is much greater than Mo mineralization grade. The molybdenum ore has the exploitation value when the industrial grade is higher than 0.06%. Mo content in different silicate melts varies because of the concentration of SiO2, that is, Mo content in the granodiorite is greater. (2) The content of Mo, which varies with reaction time, arises first and drops down in the alkali basalt melts, while variation is not too obvious in the granodiorite melts on the whole. (3) According to the picture of sample, the conclusion is not reached very well on some issues, such as the volatility and characteristic of molybdenum oxide and dependence on the geology environment.

Acid catalyzed synthesis of ordered bifunctionalized mesoporous organosilicas with large pore

Thiol-functionalized mesoporous ethane-silicas with large pore were synthesized by co-condensation of 1,2-bis(trimethoxy-sily)ethane (BTME) with 3-mercaptopropyltrimethoxysilane (MPTMS) using nonionic oligomeric polymer C1H (OCH(2)-CH(2))(10)OH (Brij-76) or poly(alkylene oxide) block copolymer (P123) as surfactant in acidic medium. The results of powder X-ray diffraction (XRD), nitrogen gas adsorption, and transmission electron microscopy (TEM) show that the resultant materials have well-ordered hexagonal mesoscopic structure with uniform pore size distributions. (29)Si MAS NNR, (13)C CP-MAS NMR. FT-IR, and UV Raman spectroscopies confirm the attachment of thiol functionalities in the mesoporous ethane-sificas. The maximum content of the attached thiol group (-SH) in the mesoporous framework is 2.48mmol/g. The ordered mesoporous materials are efficient Hg(2+) adsorbents with almost every -SH site accessible to Hg(2+). In the presence of various kinds of heavy metal ions such as Hg(2+), Cd(2+), Zn(2+), Cu(2+) and Cr(3+), the materials synthesized using poly(alkylene oxide) block cooollxmier (Pluronic 123) g(2+), as surfactant show almost similar affinity to Hg(2+), Cd(2+), and Cr(3+), while the materials synthesized using ofigomeric polymer C(18)H(37)(OCH(2)CH(2))(10)OH (Brij-76) as surfactant exhibit high selectivity to Hg(2+). (C) 2004 Elsevier Inc. All rights reserved.

Transfer and detection of single electrons using metal-oxide-semiconductor field-effect transistors

A single-electron turnstile and electrometer circuit was fabricated on a silicon-on-insulator substrate. The turnstile, which is operated by opening and closing two metal-oxide-semiconductor field-effect transistors (MOSFETs) alternately, allows current quantization at 20 K due to single-electron transfer. Another MOSFET is placed at the drain side of the turnstile to form an electron storage island. Therefore, one-by-one electron entrance into the storage island from the turnstile can be detected as an abrupt change in the current of the electrometer, which is placed near the storage island and electrically coupled to it. The correspondence between the quantized current and the single-electron counting was confirmed.

Rapid label-free detection of metal-induced Alzheimer's amyloid beta peptide aggregation by electrochemical method

Amyloid beta peptide plays a critical role in the pathogenesis of Alzheimer's disease (AD). Metal ions are highly enriched in cerebral amyloid deposits in AD and are proposed to be able to mediate A beta conformation. Therefore, a rapid, low-cost, and sensitive detection of metal-induced A beta aggregation and their relation to AD is clearly needed for the clinical diagnosis and treatment. In this report, we study metal-induced A beta aggregation by a rapid, label-free electrochemical method and monitor both the aggregation kinetics and the morphology in the absence or presence of Zn (II) and Cu (II).

Surface plasmon resonance and electrochemistry for detection of small molecules using catalyzed deposition of metal ions on gold substrate

Small molecules are difficult to detect by conventional surface plasmon resonance (SPR) spectroscopy due to the fact that the changes in the refractive index resulted from the binding process of small biomolecules are quite small. Here, we report a simple and effective method to detect small biomolecule using SPR spectroscopy and electrochemistry by catalyzed deposition of metal ions on SPR gold film. As an example, the ascorbic acid-mediated deposition of Ag on gold film was monitored by in situ SPR spectrum. The deposition of Ag atom on gold film resulted in an obvious decrease of depth in SPR angular scan curves of reflectance intensity and minimum reflectivity angle. The depth change of the SPR reflectance intensity and minimum reflectivity angle curves mainly relied on the amount of Ag atom deposited on gold film that can be controlled by the concentration of ascorbic acid. By monitoring the deposition of Ag atom on gold film, ascorbic acid was detected in the concentration range of 2 x 10(-5) M to 1 x 10(-3) M. After each of detections, the SPR sensor surface was completely regenerated by a potential step that stripped off the Ag atom. Furthermore, the regeneration process of the sensor surface provides the feasibility for detecting the concentration of ascorbic acid by electrochemical method.

Efficiency of constructed wetlands in decontamination of water polluted by heavy metals

A twin-shaped constructed wetland (CW) comprising a vertical flow (inflow) chamber with Cyperus alternifolius followed by a reverse-vertical flow (outflow) chamber with Villarsia exaltata was assessed for decontamination of artificial wastewater polluted by heavy metals. After application of Cd, Cu, Pb, Zn over 150 days, together with Al and Mn during the final 114 days, no heavy metals with the exception of Mn could be detected in either the drainage zone at the bottom, shared by both chambers, or in the effluent. The inflow chamber was, therefore, seen to be predominantly responsible for the decontamination process of more toxic metal species with final concentrations far below WHO drinking-water standards. About one-third of the applied Cu and Mn was absorbed, predominantly by lateral roots of C. alternifolius. Lower accumulation levels were observed for Zn (5%), Cd (6%), Al (13%). and Pb (14%). Contents of Cd, Cu, Mn, and Zn in soil were highest in top layer, while Al and Pb were evenly distributed through the whole soil column. Metal species accumulating mainly in the top layer can be removed mechanically. A vertical flow CW with C. alternifolius is an effective tool in phytoremediation for treatment of water polluted with heavy metals. (C) 2002 Elsevier Science B.V. All rights reserved.

Photoluminescence properties of tensile-strained GaAsP/GaInP single quantum wells grown by metal organic chemical vapor deposition

Tensile-strained GaAsP/GaInP single quantum well (QW) laser diode (I-D) structures have been grown by low-pressure metal organic chemical vapor deposition (LP-MOCVD) and related photoluminescence (PL) properties have been investigated in detail. The samples have the same well thickness of 16 nm but different P compositions in a GaAsP QW. Two peaks in room temperature (RT) PL spectra are observed for samples with a composition larger than 0.10. Temperature and excitation-power-dependent PL spectra have been measured for a sample with it P composition of 0.15. It is found that the two peaks have a 35 meV energy separation independent of temperature and only the low-energy peak exists below 85 K. Additionally, both peak intensities exhibit a monotonous increase as excitation power increases. Analyses indicate that the two peaks arise from the intrinsic-exciton recombination mechanisms of electron-heavy hole (e-hh) and electron-light hole (e-hh). A theoretical calculation based oil model-solid theory, taking, into account the spin-orbit splitting energy, shows good agreement with our experimental results. The temperature dependence of PL intensity ratio is well explained using the spontaneous emission theory for e-hh and e-hh transitions. front which the ratio can be characterized mainly by the energy separation between the fill and Ill states.

Detection of Copper Ion with Laser-Induced Fluorescence in A Capillary Electrophoresis Microchip

A capillary electrophoresis microchip coupled with a confocal laser-induced fluorescence (LIF) detector was successfully constructed for the analysis of trace amounts of heavy metals in environmental sources. A new fluorescence dye, RBPhOH, synthesized from rhodamine B, was utilized in a glass microchip to selectively determine copper with high sensitivity. A series of factors including running buffer concentration, detection voltage, and sample loading time were optimized for maximum LIF detector response and, hence, method sensitivity.