高速列车气动噪声的计算研究

通过对高速列车气动噪声产生的关键部位进行简化抽象,对其产生的噪声进行了数值分析.该文着重讨论了两个主要的简化模型,即二维后台阶问题以及三维圆柱绕流问题.对后台阶问题进行数值模拟时采用了NLAS和 LES两种不同的方法,并同实验值进行了比较.对三维圆柱绕流问题则直接采用NLAS方法耦合FW-H声音传播方程进行了数值模拟.以此对高速列车气动噪声的机理进行了分析,并对适合于高速列车气动噪声计算的方法进行了选择

水蒸气存在下氧化钙脱氯性能的实验研究

在一个模拟流化床反应器中, 研究160~600℃下水蒸气的存在对CaO脱除HCl的影响. 采用X射线衍射仪(XRD)分析产物成分, SEM电镜对产物进行微观结构分析, 从而分析CaO的脱氯性能. 实验结果表明:随着水蒸气浓度增加, HCl的净化效率呈现一个先下降后上升的趋势. XRD分析表明, 产物的主要成分为CaClOH, 在净化效率达到一定量时, 产物中生成了Ca(OH)_2;SEM电镜观测到中低温下产物的针状形态以及高温条件下稀松产物层的生成.

几种植物药材的色谱－质谱联用分析

本论文由四章组成，第一、二、三章为实验论文，分别报道了中药羌活、菊花、全缘叶绿绒蒿的化学成分的高效液相色谱(HPLC)和液相色谱-质谱(LC-MS)联用分析以及挥发油的气相色谱-质谱(GC-MS)联用分析。第四章概述了重要藏药材化学成分的研究进展。 第一章首先对28批不同产地的羌活药材进行了HPLC分析，建立了羌活的指纹图谱。结果表明，不同产地羌活的化学成分基本相似，但是各组分在含量上存在较大差异。其次，对羌活的主要化学组分包括紫花前胡苷、紫花前胡素、6'-O-反式阿魏酸紫花前胡苷、茴香酸对羟基苯乙酯、羌活醇和异欧前胡素进行了定量分析。此外，针对同一产地不同采集时间的羌活挥发油进行系统分析，结果表明它们的化学成分基本相似，主要含有a－蒎烯、b－蒎烯、柠檬烯和龙脑乙酸酯等，只是各组分含量有所变化，这说明采集药材时要注意采集时间。 第二章分别报道了不同产地不同品种菊花非挥发性成分的液相色谱－二极管阵列检测－串联质谱(LC-PDA-MSn)分析和挥发性成分的气相色谱－质谱(GC-MS)联用分析比较。首先通过液相色谱－质谱－串联质谱对各色谱峰进行定性分析，通过与标准品对照，以及UV和MSn提供的结构信息，结合文献报道共鉴定了11个化学成分，包括绿原酸和10个黄酮化合物，并比较了不同品种菊花的化学成分相同之处和不同之处。另外，对七种不同品种不同产地的菊花挥发性成分通过GC-MS分析表明其主要挥发性成分为单萜类、倍半萜类化合物，共有成分樟脑、龙脑和龙脑乙酸酯等，各成分在不同挥发油中的含量变化明显。 第三章为藏药全缘叶绿绒蒿不同部位挥发油成分的气相色谱－质谱(GC-MS)联用分析，比较其挥发油化学成分及其含量变化的异同点。研究结果表明，全缘叶绿绒蒿花精油的化学成分明显多于全草部位，且两者主要成分有较大的差别。 第四章综述了青藏高原重要藏药材化学成分的研究进展。分别对藏药的资源特色和110多种常用重要藏药材的化学成分的研究情况以及藏药未来发展思路进行了阐述，以期对相关的研究提供一些信息。 This dissertation consists of four parts. The first part reports studies on the fingerprint of Notopterygium incisum and N. forbesii by HPLC-PDA-MSn, and on the constitutents of essential oil by GC-MS. The second part elaborates the chemical constitutents of Chrysanthemum L. by LC-MS and GC-MS analysis. The third part reports the chemical compositions of the essential oil from the different parts of Meconopsis integrifolia. The fourth part reviews on the progress of the studies on the chemical constitutents in Tibetan medicines. The first chapter is about HPLC analysis of a traditional Chinese herbal medicine Qiang-huo (Notopterygium incisum and N. forbesii ). Firstly, based on analyzing and contrasting the relative retention time and relative paek area in chromatographic fingerprint, the HPLC chromatographic fingerprint of Notopterygium incisum was established, which can used as a scientific basement for the quality evalution of this herb. Secondly, quantitative analysis were performed on the main chemical constitutents of Notopterygium incisum and N. forbesii including nodakenin, nodakenetin, 6’-O-trans-feruloylnodakenin, p-hydroxypenethylanisate, notopterol and isoimperatorin. The results indicated that the contents were variable related to different growth regions. Lastly, the essential oil of Notopterygium incisum collected in different harvest times is analyzed by GC-MS. The second chapter is about HPLC-MS and GC-MS analysis of several species of Chrysanthemum L. Firstly, eleven compounds including chlorogenic acid and ten flavone compounds were identified in the methanol extract of Chrysanthemum morifolium Ramat. from different regions by HPLC-MS analysis. Secondly, the essential oil of seven different species of Chrysanthemum L.were extracted by steam distillation, and its compositions were isolated and identified by GC-MS. The main active constitutents such as camphor, borneol and bornyl acetate were detected, but the relative content varied notably. The third chapter is about GC-MS analysis of the essential oil from different parts of Meconopsis integrifolia. It indicated great difference of the chemical compositions of their oil in the flowers and residual overground part. The last chapter is a review of the research progress of the Tibetan medicines, which includes their features and their main chemical constitutents.

双花千里光、川芎及宽叶羌活的化学成分研究

本论文由四章组成。第一、二和三章分别报道了双花千里光、川芎和宽叶羌活的化学成分研究。从三种药用植物中共分离和鉴定了40 个化学成分，其中8个为新化合物。第四章概述了藳本属植物及日本川芎的化学成分研究进展。 第一章包括三个部分。第一部分报道双花千里光（Senecio dianthus Franch.）地上部分乙醇提取物的化学成分。采用正、反相硅胶柱层析等各种分离方法，从中共分离出8 个艾里莫酚型倍半萜内酯，其中5 个是新化合物，并且有1 个为首次发现的连接了含氮原子取代基的艾里莫酚型倍半萜内酯。它们的结构经MS、IR、NMR及X-单晶衍射等解析方法确定为2b-angeloyloxy-10b-hydroxyeremophil-7(11)-en-8a,12-olide (1)、6b-angeloyloxy-10b-hydroxyeremophil-7(11)-en-8a,12-olide (2)、2b-angeloyloxy-8b,10b- dihydroxyeremophil-7(11)-en-8a,12-olide (3)、2b-angeloyloxy-8a-hydroxyeremophil-7(11),9(10)-dien-8b,12-olide (4)和8b-amino-10b- hydroxyleremophil-7(11)-en-8a,12-olide (5)。这8 个倍半萜内酯经体外生物活性测试表明均具有通过抑制巨噬细胞增殖抵制破骨细胞增生的活性。第二部分对艾里莫酚型倍半萜内酯的质谱裂解规律进行了初步探讨。第三部分报道双花千里光茎、和叶花的挥发油成分分析。采用传统水蒸气蒸馏法分别提取了双花千里光茎、叶和花的挥发油，用气相色谱－质谱联用（GC-MS）技术分别分离鉴定了其化学成分，从茎、叶和花挥发油中各分离和鉴定出70、80 和73 种化学成分，分别占挥发油总量的91.2％、85.7％及93.4％。 第二章包括两个部分。第一部分报道川芎（Ligusticum chuanxiong Hort.）根茎乙醇提取物的化学成分。通过正、反相硅胶柱层析等分离纯化和MS、NMR及X-单晶衍射等解析方法，共分离鉴定了21 个化合物，结构类型分属于苯酞、二聚苯酞、香豆素和脂肪酸类。其中2 个为结构比较新颖的二聚苯酞类化合物：chuanxiongnolide A (19)和chuanxiongnolide B (20)，化合物19 的结构经X-单晶衍射得到确证。第二部分报道川芎挥发油的化学成分。采用不同的提取方法（溶剂萃取法、水蒸气蒸馏法、CO2 超临界流体萃取法）提取川芎挥发油，同时采集不同产地（四川彭县、四川郫县、云南鹤庆）及不同品质（川芎、奶芎、苓子）的川芎产品，利用GC-MS 技术分离鉴定其挥发油的化学成分，计算各成分的相对含量，并对比分析其中的异同。 第三章报道宽叶羌活（Notopterygium forbesii Boiss.）根茎化学成分的分离纯化和结构鉴定。通过正、反相硅胶柱层析等分离纯化和MS、NMR 等解析方法，共分离鉴定了13 个化合物，结构类型分属于香豆素、二氢异香豆素、甾体和羧酸类。其中1 个新二氢异香豆素类成分鉴定为6-methoxy-hydrangenol (37)。 第四章概述了藳本属植物及日本川芎化学成分的研究进展。 This dissertation consisted of four chapters. The former three chaptersrespectively elaborated the phytochemical investigation of three herbal medicines:Senecio dianthus Franch., Ligusticum chuanxiong Hort. and Notopterygium forbesiiBoiss.. Forty compounds, including eight new ones, were isolated and identified byspectral and chemical evidence. The fourth chapter elaborated the study progress ofchemical constituents of Ligusticum genus and Cnidium offcinale. The first chapter consisted of three parts. The first part is about the chemicalconstituents of ethanol extraction and essential oils from the aerial parts of S. dianthu.Eight eremophilenolides were isolated and identified. Among them, five ones are newcompounds and one of them is a novel eremophilenolide attched with an amino group.The structures of the new compounds were identified as 2b-angeloyloxy-10b-hydroxyeremophil-7(11)-en-8a,12-olide (1)，6b-angeloyloxy-10b-hydroxyeremophil-7(11)-en-8a,12-olide (2)，2b-angeloyloxy-8b,10b-dihydroxyeremophil-7(11)-en-8a,12-olide (3)，2b-angeloyloxy-8a-hydroxyeremophil-7(11),9(10)-dien-8b,12-olide (4) and8b-amino-10b-hydroxyeremophil-7(11)-en-8a,12-olide (5) by spectral evidence andX-ray crystallography analysis. All the compounds were evaluated for theiranti-osteoclstogenesis activity using a proliferation inhibit assay with microphagecells. The second part elementarily discussed the characteristic fragmentation oferemophilenolides isolated from S. dianthus in ESI-MS.The latter part is about thechemical constituents of essential oil extracted from stems, leaves and flowers of S.dianthus with steam distillation. By the GC-MS analysis, 70, 80 and 73 compoundswere respectively isolated and identified which accounted for more than 91.2％, 85.7％ and 93.4％ of total essential oil. The second chapter, including two parts, is about the the chemical constituents ofethanol extraction and essential oils from rhizomes of L. chuanxion. In the first part, twenty-one compounds were isolated and iedntified. Two ones are novel dimericphthalides and the structures were suggested as chuanxiongnolide A (19) andchuanxiongnolide B (20) by spectral evidence and confirmed by X-raycrystallography analysis. In the second part, the samples were collected from differentextract techniques (solvent extraction, steam distillation and supercriticalfluid extraction), different habitats (Peng and Pi counties, Sichuan province; Heqing,Yunnan province) and different qualities (Chuanxiong, Naixiong and Lingzi). Thechemical constituents of essential oil from L. chuanxiong were analyzed by GC-MS and were compared each other. The third chapter is about the chemical constituents of rhizomas of N. forbesii,which belongs to a endemic genus of China. Thirteen compounds were isolated andidentified. One of them is a new dihydroisocoumarin and the structure was identifiedas 6-methoxy-hydrangenol (37) by spectral evidence. The fourth chapter is a review on study progress of chemical constituents ofLigusticum species and Cnidium offcinale.

千金子和暖地大叶藓的化学成分研究

本论文由三部分共4 章组成。第一部分阐述了大戟科大戟属传统中药千金子（Euphorbia lathyris L.）化学成分、生物学活性以及千金子化学成分的HPLC、UPLC-MS、GC-MS 分析成果。第二部分介绍了民族药材暖地大叶藓（Rhodobryum giganteum (Schwaegr.) Par.）的化学成分研究和结构鉴定。第三部分概述了大戟属 植物中大环二萜酯的研究进展。 第一章包括1－3 节。在第1, 2 节中报道了千金子（Euphorbia lathyris L.）95% 乙醇提取物的化学成分分离鉴定。我们采用正、反相硅胶柱层析、重结晶等各种分离方法，凭借MS、IR、NMR、X-ray 等现代仪器手段,从中共分离鉴定22 个化合物。其中8 个是高活性化合物前体-续随子烷型大环二萜及3 个巨大戟烷型二萜，还有香豆素、生物碱、甾体等类型，其中完成对5 个大环二萜酯构型的确认，对2 个二萜酯构型进行了修正。第3 节中介绍对千金子化学成分的细胞毒性、α-葡萄糖苷酶抑制活性、P-gp 表达抑制活性的模型筛选结果。 第二章包括3 节，第1 节报道不同产地千金子高效液相色谱定量分析结果。第2 节介绍了各大环二萜酯的HPLC-MS/MS 的分析结果，并且对其质谱裂解规律、UPLC-MS 快速鉴定方法做了进一步讨论。第3 节介绍了千金子挥发油成分分析。采用传统水蒸气蒸馏方法提取千金子中的挥发油，并经气相色谱－质谱联用（GC-MS）技术共分离鉴定出 49 个化合物，占挥发油总量的90.48％。 第三章包括1, 2 两节，第1 节报道了暖地大叶藓化学成分。采用正、反相硅胶，凝胶柱层析等各种分离方法和MS、IR、NMR 等解析手段，共分离鉴定10个化合物，其中一个环肽化合物为新化合物。第2 节介绍了暖地大叶藓挥发油成分分析，共分离鉴定出 52 个化合物，占其挥发油总量的85.67％。 第四章概述了大戟科大戟属植物中大环二萜酯的研究进展。 This dissertation consists of three parts. In the first part, it is elaborated that the phytochemical investigation from the traditional Chinese medicine: seeds of Euphorbia lathyris L.. Biological activity and constituents analysis by HPLC、UPLC-MS、GC-MS were reported. In the second part, it is discussed that the chemical constituents were isolated and identificated from minority nationalitical herb－Rhodobryum giganteum (Schwaegr.) Par.. The third part is a review about the progress of studies on macrocyclic diterpenes from Euphorbia. The first part is composed of 1－3 sections. The section 1and 2 is focused on the isolation and identification of chemical constituents from seeds of E. lathyris. 22 compounds were isolated from the seeds of E. lathyris. by isolation methods of column chromatography (silica gel, including reversed phase) and recrystallisation on the basis of spectroscopic methods including IR, MS, NMR and X-ray. In 8 macrocyclic and 3 ingenane diterpenes, the relative configuration of 5 macrocyclic diterpenes were confirmed, in which 2 were amended. In the third section, cell cytotoxic activity, restraining activity of α-Glucosidase and multidrug resistance (MDR) reversing activity about P-gp were tested. 5 potential revsering reagents were found. The second part is composed of 1－3 sections. In first section it is described that the quality of the chemical constituents of E. lathyris from 5 sources , which were analyzed by high-performance liquid chromatography. In addition, the fractionation rules of some macrocyclic diterpenes were discussed and Ultra Performance Liquid Chromatography/ electrospray ionization mass spectrometry (UPLC-MS) was applied for quick determination of compounds in the second section. In the third section, chemical analysis of the essential oil from seeds of E. lathyris by GC-MS were reported. The essential oil from the seeds of E. lathyris L. in Sichuan was extracted by steam distillation and 49 compounds were isolated and identified from the essential oil by gas chromatography-mass spectrometer (GC-MS). These compounds are accounted for 90.46% of the total essential oil. The second part, including section 4 and 5, is about the phytochemical investigation of R. giganteum. In the former section, ten compounds were isolated and identified. Among them, a new peptide was characterized by spectroscopic analysis including IR, MS and NMR. In the other section, 52 compounds were isolated and identified from the essential oil by gas chromatography-mass spectrometer (GC-MS). These compounds are accounted for 85.67% of the total essential oil. The third part is a review about the progress of studies on macrocyclic diterpenes from Euphorbia.

Effects of reaction conditions on the selective oxidation of propane to acrylic acid on Mo-V-Te-Nb oxides

An effective Mo-1 V(0.3)Te(0.23)Nb(0.12)Ox catalysts for the selective oxidation of propane to acrylic acid was successfully prepared by using rotavap method. The catalyst was characterized by XRD and shown to contain (V0.07Mo0.93)(5)O-14, (Nb0.09Mo0.91)O-2.8,3MoO(2)(.)Nb(2)O(5), Mo5TeO16 and/or TeMo4O13, Te4Nb2O13 and a new TeMO (TeVMoO or TeVNbMoO; M = Mo, V and Nb) crystalline phase as the major phase. Regardless of the intrinsic catalytic characteristics of the catalyst, the external reaction conditions would have strong effects on the catalytic performance for propane oxidation. So in this paper, the effects of reaction conditions were investigated and discussed, including temperature, space velocity, V(air)/V(C3H8) ratio and V(steam)/V(C3H8) ratio. A stability test was also carried out on Mo1V0.3Te0.23Nb0.12Ox catalyst. The experimental run was performed during 100 h under the optimized reaction conditions. During the 100 h of operation, propane conversion and acrylic acid selectivity remained at about 59 and 64%, respectively. (C) 2004 Elsevier B.V. All rights reserved.

Promotional effect of colloidal alumina on the activity of the In/HZSM-5 catalyst for the selective reduction of NO with methane

Colloidal alumina was used to improve the activity of an In/HZSM-5 catalyst for the selective reduction of NO with CH4 in the excess of oxygen. Compared with In/HZSM-5, the In/HZSM-5/Al2O3 catalyst showed higher activity in a wide range of reaction temperatures. It is visualized that a synergetic effect between In/HZSM-5 and Al2O3 enhances the conversion of NOx. The addition of Al2O3 improved the conversion of NO to NO2 and facilitated the activation of methane. An In/HZSM-5/Al2O3 pre-treated with steam for 15 h at 700 degreesC still showed a high activity for the removal of NOx with methane, while an In/HZSM-5 similarly pre-treated with steam showed a lower activity than the fresh sample. The activity of the In/HZSM-5/Al2O3 catalyst could be restored completely after water vapor was removed from the feed gas. Furthermore, it was found that the In/HZSM-5/Al2O3 remained fairly active under high GHSV and O-2 concentration conditions. It was also interesting to find that an increase in NO content could enhance the conversion of methane, and this illustrates that the existence of NO is beneficial for the activation of methane. (C) 2002 Elsevier Science B.V. All rights reserved.

Solid-state MAS NMR studies on the hydrothermal stability of the zeolite catalysts for residual oil selective catalytic cracking

By using the solid-state MAS NMR technique, the hydrothermal stabilities (under 100% steam at 1073 K) of HZSM-5 zeolites modified by lanthanum and phosphorus have been studied. They are excellent zeolite catalysts for residual oil selective catalytic cracking (RSCC) processes. It was indicated that the introduction of phosphorus to the zeolite via impregnation with orthophosphoric acid led to dealumination as well as formation of different Al species, which were well distinguished by Al-27 3Q MAS NMR. Meanwhile, the hydrothermal stabilities of the zeolites (P/HZSM-5, La-P/HZSM-5) were enhanced even after the samples were treated under severe conditions for a prolonged time. It was found that the Si-O-Al bonds were broken under hydrothermal conditions, while at the same time the phosphorous compounds would occupy the silicon sites to form (SiO)(x)Al(OP)(4 - x) species. With increasing time, more silicon sites around the tetrahedral coordinated Al in the lattice can be replaced till the aluminum is completely expelled from the framework. The existence of lanthanum can partially restrict the breaking of the Si-O-Al bonds and the replacement of the silicon sites by phosphorus, thus preventing dealumination under hydrothermal conditions. This was also proved by P-31 MAS NMR spectra. (C) 2004 Elsevier Inc. All rights reserved.

Fe改性工业Cu/Zn/Al催化剂甲醇水蒸气重整反应制氢的研究

中国科学院山西煤炭化学研究所

Analysis of chemical constituents of essential oil in purple magnolia leaves by gas chromatography-mass spectrometry

The essential oil in purple magnolia leaves was extracted by steam distillation approaches. The oil obtained was dried with anhydrous magnesium sulfate. According to the analysis of gas chromatography/mass spectrometry, more than 40 peaks were separated and 32 compounds were identified. The identified constituents represent 95% of the peak area of the essential oil. The main compounds were germacrene-D, santolina triene, caryophyllene, 1,3,7-octatriene, 3,7-dimethyl, and camphene, etc.

青藏高原横波速度与各向异性结构及其壳幔形变印迹

As the most spectacular and youngest case of continental collision on the Earth, to investigate the crust and mantle of Tibetan plateau, and then to reveal its characters of structure and deformation, are most important to understand its deformation mechanism and deep process. A great number of surface wave data were initially collected from events occurred between 1980 and 2002, which were recorded by 13 broadband digital stations in Eurasia and India. Up to 1,525 source-station Rayleigh waveforms and 1,464 Love wave trains were analysed to obtain group velocity dispersions, accompanying with the detail and quantitative assessment of the fitness of the classic Ray Theory, errors from focal and measurements. Assuming the model region covered by a mesh of 2ox2o-sized grid-cells, we have used the damped least-squares approach and the SVD to carry out tomographic inversion, SV- and SH-wave velocity images of the crust and upper mantle beneath the Tibetan Plateau and surroundings are obtained, and then the radial anisotropy is computed from the Love-Rayleigh discrepancy. The main results demonstrate that follows, a) The Moho beneath the Tibetan Plateau presents an undulating shape that lies between 65 and 74 km, and a clear correlation between the elevations of the plateau and the Moho topography suggests that at least a great part of the highly raised plateau is isostatically compensated. b) The lithospheric root presents a depth that can be substantiated at ~140 km (Qiangtang Block) and exceptionally at ~180 km (Lhasa Block), and exhibits laterally varying fast velocity between 4.6 and 4.7 km/s, even ~4.8 km/s under northern Lhasa Block and Qiangtang Block, which may be correlated with the presence of a shield-like upper mantle beneath the Tibetan Plateau and therefore looked as one of the geophysical tests confirming the underthrusting of India, whose leading edge might have exceeded the Bangong-Nujiang Suture, even the Jinsha Suture. c) The asthenosphere is depicted by a low velocity channel at depths between 140 and 220 km with negative velocity gradient and velocities as low as 4.2 km/s; d) Areas in which transverse radial anisotropy is in excess of ~4% and 6% on the average anisotropy are found in the crust and upper mantle underlying most of the Plateau, and up to 8% in some places. The strength, spatial configuration and sign of radial anisotropy seem to indicate the existence of a regime of horizontal compressive forces in the frame of the convergent orogen at the same time that laterally varying lithospheric rheology and a differential movement as regards the compressive driving forces. e) Slow-velocity anomalies of 12% or more in southern Tibet and the eastern edge of the Plateau support the idea of a mechanically weak middle-to-lower crust and the existence of crustal flow in Tibet.

井间地震速度层析成像方法与软件系统

Crosshole Seismic tomography has been broadly studied and applied in the fields of resource exploration and engineering exploration because of its special observing manner and better resolution than normal seismic exploration. This thesis will state the theory and method of Crosshole Seismic tomography. Basing on the previous studies，the thesis studied the initial velocity model，ray-tracing method, and developed the three-dimension tomography software. All the cells that a ray passes through are of the same velocities if the paths from transmitters to receivers are straight. The cells that the each ray passes through are recorded, and rays that pass through each cell are calculated. The ray average velocity which passes through a cell is set as the cell velocity. Analogously we can make a initial node velocity model because the velocity sum is calculated on the all cells which own to a certain node, and the cell number is summed about each nodes，the ratio of the velocity sum to the all cells number is set as the node velocity. The inversion result from the initial node velocity model is better than that of the average velocity model. Ray-bending and Shortest Path for Rays (SPR) have shortcomings and limitations respectively. Using crooked rays obtained from SPR rather than straight lines as the starting point can not only avoid ray bending converging to the local minimum travel time path, but also settle the no smooth ray problem obtained by SPR. The hybrid method costs much computation time, which is roughly equal to the time that SPR expends. The Delphi development tool based on the Object Pascal language standard has an advantage of object-oriented. TDTOM (Three Dimensions Tomography) was developed by using Delphi from the DOS version. Improvement on the part of inversion was made, which bring faster convergence velocity. TDTOM can be used to do velocity tomography from the first arrival travel time of the seismic wave, and it has the good qualities of friendly user interface and convenient operation. TDTOM is used to reconstruct the velocity image for a set of crosshole data from Karamay Oil Field. The geological explanation is then given by comparing the inversion effects of different ray-tracing methods. High velocity zones mean the cover of oil reservoir, and low velocity zones correspond to the reservoir or the steam flooding layer.

井间地震技术研究和应用

Cross well seismic technique is a new type of geophysical method, which observes the seismic wave of the geologic body by placing both the source and receiver in the wells. By applying this method, it averted the absorption to high-frequency component of seismic signal caused by low weathering layers, thus, an extremely high-resolution seismic signal can be acquired. And extremely fine image of cross well formations, structure, and reservoir can be achieved as well. An integrated research is conducted to the high-frequency S-wave and P-wave data and some other data to determine the small faults, small structure and resolving the issues concerning the thin bed and reservoir's connectivity, fluid distribution, steam injection and fracture. This method connects the high-resolution surface seismic, logging and reservoir engineering. In this paper, based on the E & P situation in the oilfield and the theory of geophysical exploration, a research is conducted on cross well seismic technology in general and its important issues in cross well seismic technology in particular. A technological series of integrated field acquisition, data processing and interpretation and its integrated application research were developed and this new method can be applied to oilfield development and optimizing oilfield development scheme. The contents and results in this paper are as listed follows: An overview was given on the status quo and development of the cross well seismic method and problems concerning the cross well seismic technology and the difference in cross well seismic technology between China and international levels; And an analysis and comparison are given on foreign-made field data acquisition systems for cross-well seismic and pointed out the pros and cons of the field systems manufactured by these two foreign companies and this is highly valuable to import foreign-made cross well seismic field acquisition system for China. After analyses were conducted to the geometry design and field data for the cross well seismic method, a common wave field time-depth curve equation was derived and three types of pipe waves were discovered for the first time. Then, a research was conducted on the mechanism for its generation. Based on the wave field separation theory for cross well seismic method, we believe that different type of wave fields in different gather domain has different attributes characteristics, multiple methods (for instance, F-K filtering and median filtering) were applied in eliminating and suppressing the cross well disturbances and successfully separated the upgoing and downgoing waves and a satisfactory result has been achieved. In the area of wave field numerical simulation for cross well seismic method, a analysis was conducted on conventional ray tracing method and its shortcomings and proposed a minimum travel time ray tracing method based on Feraiat theory in this paper. This method is not only has high-speed calculation, but also with no rays enter into "dead end" or "blinded spot" after numerous iterations and it is become more adequate for complex velocity model. This is first time that the travel time interpolation has been brought into consideration, a dynamic ray tracing method with shortest possible path has been developed for the first arrivals of any complex mediums, such as transmission, diffraction and refraction, etc and eliminated the limitation for only traveling from one node to another node and increases the calculation accuracy for minimum travel time and ray tracing path and derives solution and corresponding edge conditions to the fourth-order differential sonic wave equation. The final step is to calculate cross well seismic synthetics for given source and receivers from multiple geological bodies. Thus, real cross-well seismic wave field can be recognized through scientific means and provides important foundation to guide the cross well seismic field geometry designing. A velocity tomographic inversion of the least square conjugated gradient method was developed for cross well seismic velocity tomopgraphic inversion and a modification has been made to object function of the old high frequency ray tracing method and put forward a thin bed oriented model for finite frequency velocity tomographic inversion method. As the theory model and results demonstrates that the method is simple and effective and is very important in seismic ray tomographic imaging for the complex geological body. Based on the characteristics of the cross well seismic algorithm, a processing flow for cross well seismic data processing has been built and optimized and applied to the production, a good section of velocity tomopgrphic inversion and cross well reflection imaging has been acquired. The cross well seismic data is acquired from the depth domain and how to interprets the depth domain data and retrieve the attributes is a brand new subject. After research was conducted on synthetics and trace integration from depth domain for the cross well seismic data interpretation, first of all, a research was conducted on logging constraint wave impedance of cross well seismic data and initially set up cross well seismic data interpretation flows. After it applied and interpreted to the cross well seismic data and a good geological results has been achieved in velocity tomographic inversion and reflection depth imaging and a lot of difficult problems for oilfield development has been resolved. This powerful, new method is good for oilfield development scheme optimization and increasing EOR. Based on conventional reservoir geological model building from logging data, a new method is also discussed on constraining the accuracy of reservoir geological model by applying the high resolution cross well seismic data and it has applied to Fan 124 project and a good results has been achieved which it presents a bight future for the cross well seismic technology.