162 resultados para Septo-optic dysplasia
Resumo:
New parasitic lasing suppression techniques are developed and high gain amplification is demonstrated in a petawatt level Ti:sapphire amplifier based on the chirped pulse amplification (CPA) scheme. Cladding the large aperture Ti: sapphire with refractive-index matched liquid doped with absorber suppresses the transverse lasing. The acousto-optic programmable dispersive filter (AOPDF) is used to realize side-lobe suppression in the temporal profile of the compressed pulse. The 800 nm laser output with peak power of 0.89 PW and pulse width of 29.0 fs is demonstrated. (c) 2007 Optical Society of America.
Resumo:
提出了一种能够测量高温的光纤布拉格光栅(FBG)传感器结构。利用线膨胀系数和长度均不同的两种金属细杆和光纤布拉格光栅设计而成的传感头,能够将被测温度转化为光栅的应变,解调由应变引起的光栅波长漂移,即可得知待测的温度。目前在实验室实现了500℃的动态范围和1℃的温度分辨率,实验结果与理论分析一致。
Resumo:
光纤传感的灵敏性及工程"存活率"是其工程实用化的两个关键技术参量,对光纤-混凝土结构两种常用裂缝光纤传感光信号对裂缝宽度的灵敏性与存活率进行了实验研究,对光纤涂覆层对灵敏性影响的大小和机理进行了分析,并制作了灵敏性与存活率均较高的光纤试验样本,与裂缝成45°夹角时,相比于等直径的普通二次涂覆粗光纤(10/125/900μm),样本的灵敏性提高近65%,而存活率亦高出约15%。研究结果可为裂缝光纤传感的优化设计和工程应用提供了基本参照。
Resumo:
基于混凝土模型试验,对涂敷层的传感光纤的裂缝复用能力进行了定量分析,得到了传感光纤和工程结构裂缝夹角在30°,45°,60°时的复用能力与裂缝宽度的关系曲线。对由软性材料构成的光纤涂敷层来说,光纤的复用能力随涂敷层厚度的增加而增大,在与裂缝夹角成45°时,二次涂敷粗光纤的复用能力约为细光纤的5倍,表明光纤敷层对光纤裂缝监测的复用能力具有较大影响。对这种影响的机理进行了理论分析和试验研究,发现当混凝土开裂时,光纤沿混凝土界面的滑移是光纤涂敷层影响光纤裂缝复用能力的主要原因,在光纤与裂缝夹角成45°时,这一影
Resumo:
基于单点裂缝模型试验结果分析,提出了一种利用瑞利散射的工程结构裂缝光纤监测复用能力的方法,得到水工混凝土裂缝光纤监测两种典型方案的裂缝复用能力,结合三峡工程泄洪坝段上游面出现的裂缝,进行了光纤裂缝传感复用能力的工程适用性分析,进一步揭示工程裂缝光纤分布式监测能力研究的意义.
Resumo:
基于混凝土模型试验,对大坝裂缝方位的随机性对基于瑞利散射的光纤裂缝传感灵敏性的影响进行了定量分析,得到了传感光纤在大坝安全监控缝宽控制范围内,与裂缝夹角为20°、30°、45°、60°时的光纤灵敏性与裂缝宽度关系曲线。实验发现裂缝与光纤的方位角每增加15°,则光纤的灵敏性降低一半以上,这表明工程裂缝方位的随机性对光纤裂缝传感的灵敏性具有较大影响。对此影响的力学机理进行了分析,并提出相应的工程对策。
Resumo:
本文提出了一种将光学谐振腔中多次来回反射所产生的法拉第旋转积累效应转化为光学信号偏振度变化的光纤电流传感方案。这种方案的主要优点是可以克服环境等因素的扰动带来偏振态变化所产生的影响。文中对所提出方案的特性进行了简单的理论分析和模拟计算,并给出了相应的实验结果验证。
Resumo:
对串联的长周期光纤光栅(CLPFG)的透射谱特性进行了理论分析和实验研究。分析表明,长周期光纤光栅中纤芯模和包层模之间的马赫-曾德尔干涉效应导致在长周期光纤光栅谐振峰内的梳状滤波结构特性;其峰值位置和峰间距同串联区光纤的长度以及光纤的波导色散因子有关。测量了长周期光纤光栅的透射谱,并研究了其温度特性。根据测量数据,得到对应于1554nm波长处,所用单模光纤HE14模的波导色散因子γ为0.874;纤芯/包层有效折射率差的热光系数为4.8×10^-5℃^-1。并对这一测试方法和结果,以及长周期光纤光栅的应用进
Resumo:
A compact two-step modified-signed-digit arithmetic-logic array processor is proposed. When the reference digits are programmed, both addition and subtraction can be performed by the same binary logic operations regardless of the sign of the input digits. The optical implementation and experimental demonstration with an electron-trapping device are shown. Each digit is encoded by a single pixel, and no polarization is included. Any combinational logic can be easily performed without optoelectronic and electro-optic conversions of the intermediate results. The system is compact, general purpose, simple to align, and has a high signal-to-noise ratio. (C) 1999 Optical Society of America.
Resumo:
The frequency upconversion properties of Er3+/Yb3+-codoped heavy metal oxide lead-germanium-bismuth oxide glasses under 975 mn excitation are investigated. Intense green and red emission bands centered at 536, 556 and 672 run, corresponding to the H-2(1/2) --> I-4(15/2), S-4(3/2) --> I-4(15/2) and F-4(9/2) -->I-4(15/2) transitions of Er3+, respectively, were simultaneously observed at room temperature. The influences of PbO on upconversion intensity for the green (536 and 556 nm) and red (672 nm) emissions were compared and discussed. The optimized rare earth doping ratio of Er3+ and Yb3+, is 1:5 for these glasses, which results in the stronger upconversion fluorescence intensities. The dependence of intensities of upconversion emission on excitation power and possible upconversion mechanisms were evaluated and analyzed. The structure of glass has been investigated by means of infrared (IR) spectral analysis. The results indicate that the Er3+/Yb3+-codoped heavy metal oxide lead-germanium-bismuth oxide glasses may be a potential materials for developing upconversion fiber optic devices. (C) 2006 Published by Elsevier Ltd.
Resumo:
分析了在垂直LiNbO3晶体光轴方向加电压,光沿近光轴方向传播时,入射光偏振方向对电光调制器的影响。通过计算加电场后双折射光程差的变化和偏光振动方向的转动,画出在正交偏振镜下不同起偏方向的锥光干涉图,得到干涉图随起偏方向变化的规律:由偏光振动方向转动引起的消光区域随起偏方向的转动而转动,在起偏和检偏方向上始终消光,在与起偏方向成±45°角方向始终全透光,并且消光线的交点即感应双光轴头不随起偏方向的转动而变化,始终在折射率变大的感应主轴上。
Resumo:
We quantitatively study the domain inversion in a RuO2:LiNbO3 crystal wafer by the digital holographic interferometry. The crystal wafer is placed into one arm of a Mach-Zehnder-type interferometer to record a series of holograms. Making use of the angular spectrum backward propagation algorithm, we reconstruct the optical wave field in the crystal plane. The extracted phase difference from the reconstructed optical wave field is a well linear function of the applied external voltage. We deduce that the linear electro-optic coefficient of the detected RuO2:LiNbO3 crystal sample is 9.1x10(-12) m/V. An unexpected phase contrast at the antiparallel domain wall is observed and the influence of the applied external voltage on it is studied in detail. Also the built-in internal field is quantitatively measured as 0.72 kV/mm. (c) 2006 American Institute of Physics.
Resumo:
In this paper is described a novel technique for producing an electro-optical intensity synthesizer which can generate different periodic time domain waveforms through only sine or cosine wave applied-voltages. The synthesizer presented here consists of a series of stages between two polarizers, with each stage consisting of an electro-optic element and a compensator. Every electro-optical element has the same applied-voltage function but different azimuth angles and ratios between the longitudinal and transverse lengths. The main principle is the synthesis of an electro-optic effect and a polarization interference effect in the time domain. This technique is based on an expanded Fourier positive-direction searching algorithm, which can not only simplify the calculation process but also produces many choices of structural parameters for different waveforms generation. A three-stage synthesis of an electro-optical birefringent system for continuous square waveform is undertaken to prove the principle.
Resumo:
提出了一种基于人工神经网络的全光纤化大量程实时距离干涉测量仪.采用双正弦相位调制方法,即通过同时调制半导体激光器的波长和干涉仪的光程差实现外差测量。为了扩大干涉仪的测量范围和消除输出信号中的交叉敏感,采用人工神经网络进行信号处理,把两路经过初步解调的干涉信号作为输入样本,物体距离的实际值作为输出样本,对神经网络进行训练,以使其具有良好的推广能力.实验结果表明神经网络的使用不仅扩大了距离的测量范围而且提高了测量精度.
Resumo:
采用具有高二次电光效应的掺镧锆钛酸铅陶瓷材料(PLZT),设计和制备了一种基于折射率随外加电压发生变化的电光偏转器。构建了测试系统,测得PLZT的电光系数是R33=2.1