大熊猫“盛林1号”放归监测

大熊猫(Ailuropoda melanoleuca)是我国特有的珍稀濒危物种，国家Ⅰ级重点保护野生动物，被称为“国宝”。目前，大熊猫被局限在我国中西部的岷山、邛崃、大相岭、小相岭、凉山和秦岭6大山系中。对大熊猫的保护和研究，我国政府、保护生物学科研人员、社会各界及国际保护组织都做了大量的工作。根据全国三次大熊猫调查结果显示，大熊猫栖息地片段化现象依然存在，形成多个隔离的大熊猫小种群。尤其在小相岭、大相岭、岷山B和岷山C种群，大熊猫数量较少，且栖息地破碎，面临较大威胁。有的山系大熊猫种群数量些已低于最小可存活大熊猫种群的数量，如果不采取人工措施，这些种群的大熊猫存在灭绝的危险。 将圈养大熊猫放归野外，以补充野外大熊猫种群数量，增加其遗传多样性，复壮和扩大野生大熊猫种群，是大熊猫人工繁育的最终目标。为降低放归的风险性，在放归人工繁育大熊猫前，将救护存活的野生大熊猫先有计划放归野外，并对其进行跟踪监测，对积累大熊猫放归经验，进一步研究大熊猫野外生物学习性，丰富放归地大熊猫种群遗传多样性，为人工繁育大熊猫放归野外夯实基础，具有十分重要的意义。2005年8月8日，国家林业局和四川省人民政府联合将救护野生大熊猫“盛林1号”放归于龙溪－虹口国家级自然保护区内岷山B大熊猫种群栖息地，并进行系统监测研究。成功的积累了一些放归经验和放归大熊猫的生物学资料，为人工繁育大熊猫的放归奠定了一定基础。 2005年8月至2007年6月期间，我们采用GPS无线电项圈、粪便DNA检测和红外线自动触发相机陷阱的方法，对大熊猫“盛林１号”进行了追踪监测，获得了以下成果： 1.通过分析“盛林1号”放归后了活动趋势和采用两种贝叶斯方法，利用目前五大山系的已有微卫星遗传数据，检测“盛林１号”与五大山系的遗传关系的远近，推测其来源于邛崃山系的可能性较大。 2.收集了大量“盛林1号”野外生境选择数据。我们认为“盛林1号”放归后经历了应急期、初步稳定期、长途迁徙期三个阶段（这可能是今后放归大熊猫都必经的三个时期），并与当地大熊猫种群已发生交流。目前“盛林１号”仍在寻找适合的巢域。 3.结合过去监测数据分析，在放归区域大熊猫和羚牛尽管同域分布，但由于食性不同，对微生境选择还是有着很大差异，因此保护管理对策要有针对性。 4.“盛林1号”的放归是成功的。救护大熊猫异地放归工作应继续开展，但要改进放归后的监测技术。要改进现有对人工饲养大熊猫野化培训方法和放归方式，才能真正将人工繁殖个体放归野外。 Giant Panda (Ailuropoda melanoleuca) is an endangered species endemic to China. It was listed as National Protected I Class Species and is crowned as “National treasure” of China. The populations of Giant Panda are limited in 6 mountain system in Center-West of China, i.e. Mingshan, Mt. Qionglai, Mt. Daxiangling，Mt. Xiaoxiangling, Mt. Liangshan and Mt. Qinling. The results of the Third National Survey on Giant Panda showed that the habitats of Giant Panda is still fracted and Giant Panda population is divided into several isolated small populations. Population B from Mt. Daxiangling, Mt. Xiaoxiangling and Mt. Mingshan and Population C from Mt. Mingshan are very small with very fracted habitat and are more endangered. Several populations in those mountain systems are smaller than Minimum Viable Population of Giant Panda. It is very possible that those populations will be extinct without artificial help. The ultimate Goal of Reintroduction caged Giant Panda to wild is to increase wild population size and genetics diversity and rebuild and expand wild Giant Panda population. It is of significant to return rescued wild Giant Panda to wild and monitor their behavior before reintroduction artificial reproduced Giant Panda. It will increase our knowledge on reintroduction of Giant Panda. Aug 8th, 2005, “Shenglin 1”, a rescued wild Giant Panda was returned to Longxi-Hongkou National Nature Reservoir, which is habitat of Giant Panda Population B of Mt. Mingshan. A systematic monitor was carried out on “Shenglin 1”, and the successful return enriched our biological knowledge on Giant Panda reintroduction. It will be very help for future conservation work on reintroduce artificial reproduced Giant Panda. “Shenglin 1” was tracked with GPS collar, DNA in feces and infrared-trigged camera from Aug 2005 to Jun 2007. 1. Locomotion behavior and microsatellites comparison with Giant Panda from the 5 mountain systems indicated that “Shenglin 1” is possibly from Mt. Qionglai. 2. Habitat usage of “Shenglin 1” was studied. It was suggested that there were 3 phases after return, i.e. emergency response, preliminary stable phase and long distance locomotion, which could be a general process for other returned Giant Panda. It was indicated that there was some interaction between “Shenglin 1” and local population. “Shenglin 1” is seeking for suitable home range now. 3. Monitor data also indicated that microhabitat preference of Giant Panda and takin (Budorcas taxicolor) are different because of different diet, though they are sympatric. It was suggested that conservation management for the two species should be plan in particular. 4. The reintroduction of “Shenglin 1” is a successful case. The program of return rescued Giant Panda to other habitats is of value and should be continued. However, more improvement is needed for the monitor technique. More improvement is need for feralization and returning before we return artificial reproduced Giant Panda to wild.

4KG-M制冷机做冷源的自循环氦液化装置研制；Development of helium liquefaction self-circulation system with 4 K G-M cryocoolers

采用5台1.5W/4.2KG-M制冷机(日本住友RDK415D)并联研制出了1台方便实验室使用的小型氦液化装置,并为其建立了性能测量实验台。实验结果表明:液氦温度为4.17K(饱和压力为96kPa)时,氦液化率为74L/d;液氦温度为4.42K(饱和压力为121kPa)时,液化率为116L/d,经拟合,在4.2K(饱和压力为100kPa)时液化率为83L/d,并且通过100小时以上的连续运行,说明该氦液化装置自循环性能良好。通过实验发现:实测氦液化率远大于制冷机冷头制冷量对应的计算氦液化率。分析认为:G-M制冷机气缸壁对氦气预冷是提高实际氦液化率的主要因素。

由一株真菌产生的抑制血管细胞粘附分子-1基因表达的活性物质的研究

以血管细胞粘附分子-1（VCAM－1）基因为靶位点，使用含有荧光素酶报告基因的转染细胞株筛选模型M-4细胞从微生物的代谢产物中高通量筛选能够抑制VCAM－1基因表达的生物活性物质，以期找到能够治疗诸如类风湿性关节炎等免疫性疾病的新型药物。在筛选过程中使用有机溶媒萃取、ODS反相柱层析、HPLC制备等方法，从真菌FO－5897的发酵液中分离到了一个对测活用细胞株的荧光素酶报告基因的表达有中等强度抑制作用的化合物，其IC50为13．8μmol／L，经各种理化性质及1H－NMR分析确定该化合物与文献报道的具有降血脂和抗癌作用的化合物Ascofuranone的结构相同。

1、吗啡成瘾及吗啡对其他学习记忆的影响 2、老年猕猴初级视觉皮层细胞时间及空间特性的改变

一、 药物滥用是一种慢性、复发性脑疾病。药物滥用将导致药物成瘾（addiction），其主要表现有药物依赖、药物耐受、药物敏感化以及药物停用后的戒断症状（withdraw symptom）。药物成瘾的核心特征是强迫性觅药和用药行为。药物成瘾会导致药物滥用者认知功能的损伤和认知偏差，并会造成滥用者情绪异常。药物成瘾是一个复杂的生物学过程，有着及其复杂的机理。对药物成瘾机制的解释有很多种，主要认为成瘾过程是一种学习记忆过程，学习记忆的机制在药物成瘾过程中起到了非常重要的作用。首先，学习记忆和药物成瘾过程都受到了相似的神经营养因子以及神经递质系统的调控，例如：它们都受cAMP，CREB等调控因子的调控。其次，研究发现与成瘾相关的线索，如用药有关的人物、地点或暗示等，在药物戒断很长时间后都会恢复吸毒者的用药行为。并且，当把与成瘾相关的线索呈现给毒品戒断中的人时，这些人会出现心率、呼吸加快，血压升高等现象，甚至表现出明显的渴求行为。药物对学习记忆的影响是复杂的，虽然重复使用药物会导致药物成瘾，并且这个过程需要学习记忆机制的参与，但同时使用吗啡却会对其他类型的学习记忆（如：恐惧性学习记忆、一次性被动回避学习记忆和水迷宫空间学习记忆）造成破坏。学习前给予吗啡可以剂量及状态依赖地破坏被动回避试验以及空间辨别试验的记忆获取过程。学习过程结束后立即给予吗啡可以破坏一次性被动回避试验、主动回避试验和恐惧条件化试验的记忆巩固过程。测试前给予吗啡可以破坏空间辨别试验的记忆提取过程。本研究的目的在于更进一步地了解使用吗啡导致吗啡成瘾以及使用吗啡导致学习记忆的各个阶段受损的机制。为此我们采用了药理学以及多种行为学的方法，1、用PTZ诱发的癫痫持续状态干扰吗啡成瘾的学习记忆过程，进一步比较了吗啡成瘾的学习记忆与其他学习记忆，例如：空间学习记忆以及食物奖赏学习记忆的机制有何异同；2、研究了β-肾上腺素系统与阿片系统在空间记忆巩固过程中的相互作用；3、我们还研究了NMDA受体的激动剂和拮抗剂在吗啡破坏空间记忆提取过程中的作用。研究结果发现： 1．戊四唑诱发的癫痫持续状态，对吗啡建立的条件化位置偏好没有任何影响，动物仍然对阳性箱（吗啡匹配箱）表现出明显的偏好。但是癫痫持续状态破坏了食物建立的条件化位置偏好，并且还破坏了水迷宫和Y迷宫检测的空间记忆。癫痫持续状态破坏了食物建立的条件化位置偏好，原因不是由于其影响了动物的食欲。此外，癫痫持续状态也没有持续地破坏动物的活动能力，因此，对动物活动量的影响也不是造成其他学习记忆破坏的原因。这些结果说明，吗啡成瘾的学习记忆和普通的学习记忆在机制上可能存在不同之处。为了说明这个问题，我们还需要进行其他更深入的研究。 2、训练后立即单独注射吗啡（0.25和2.5 mg/kg）或心得安（2，10和20 mg/kg）都不会破坏动物Y-迷宫空间记忆的巩固过程，动物仍然能识别新异环境，并在里面停留较长时间。但是，训练后同时注射吗啡和心得安却可以破坏动物空间记忆的巩固过程。并且，较高剂量的吗啡（2.5 mg/kg）加上较高剂量的心得安（10和20 mg/kg）对记忆的破坏更严重，实验组动物在新异环境停留的时间显著低于对照组。这说明阿片系统和去甲肾上腺素系统在破坏记忆巩固的过程中可能有协同作用。 3、记忆提取前30分钟注射吗啡（1和10 mg/kg）可以剂量依赖地破坏Y-迷宫空间记忆的提取。单独注射NMDA受体的激动剂NMDA（1，2和4 mg/kg）对动物的空间记忆提取没有影响，但是，单独注射NMDA受体拮抗剂MK-801（0.05，0.1和0.2 mg/kg）剂量依赖地破坏了空间记忆的提取。同时注射吗啡（10 mg/kg）和NMDA（2 mg/kg）可以阻断吗啡对空间记忆造成的破坏作用。相反，共同注射吗啡（1 mg/kg）和MK-801（0.05 mg/kg）可以加重吗啡对空间记忆造成的破坏作用。这说明谷氨酸系统可以干扰吗啡对记忆提取过程的影响。 二、衰老严重地影响了人们的视觉功能，然而眼睛光学系统的老年性改变并不能完全解释清楚这种视觉功能衰退。一般认为是神经系统的退化导致了这种老年性功能降低。但是，研究显示视网膜（retina）和外膝体（dorsal lateral geniculate nucleus, dLGN）在衰老的过程中神经元的数量和体积以及神经元的功能特性，如对比度敏感性、空间分辨率等，都没有明显的变化，因此，人们推测老化导致的神经系统的变化发生在更高级的视觉皮层。过去几年的研究发现老年动物视觉皮层细胞发生了一系列反应特性的改变，如：老年动物皮层细胞的方向选择性和方位选择性降低以及细胞反应的潜伏期延长。这些细胞水平的变化被认为是老年性视觉功能衰退的神经机制。为了更全面地了解衰老过程对视觉皮层的影响以及细胞反应改变与整体功能降低之间的关系，本研究采用活体动物细胞外单位记录的方法，比较了青年和老年猕猴初级视觉皮层细胞时间反应特性和空间反应特性的差异。研究结果发现：老年动物初级视觉皮层细胞的时间频率和空间频率敏感性明显比年轻动物降低。表现为老年动物初级视觉皮层细胞的最优时间和空间频率、空间分辨率（spatial resolution, SR）和较高时间截至频率（high temporal frequency cut-off, TF50）都显著低于年轻动物初级视觉皮层细胞，同时伴随着这些功能的降低，老年动物初级视觉皮层细胞的自发放增加，对视觉刺激的反应增加，但是信噪比却显著降低。这些结果表明，老年动物初级视觉皮层细胞的功能在老化过程中都普遍降低。这可能是导致老年人视觉功能降低的原因。

Performance Enhancement of Polymer Light-Emitting Diodes by Using Ultrathin Fluorinated Polyimide Modifying the Surface of Poly(3,4-ethylene dioxythiophene):Poly(styrenesulfonate)

Herein, an insulating fluorinated polyimide (F-PI) is utilized as an ultrathin buffer layer of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in polymer light-emitting diodes to enhance the device performance. The selective solubility of F-PI in common solvents avoids typical intermixing interfacial problems during the sequential multilayer spin-coating process. Compared to the control device, the F-PI modification causes the luminous and power efficiencies of the devices to be increased by a factor of 1.1 and 4.7, respectively, along with almost 3-fold device lifetime enhancement. Photovoltaic measurement, single-hole devices, and X-ray photoelectron spectroscopy, are utilized to investigate the underlying, mechanisms, and it is found that the hole injection barrier is lowered owing to the interactions between the PEDOT:PSS and F-PI. The F-PI modified PEDOT:PSS layer demonstrates step-up ionization potential profiles from the intrinsic bulk PEDOT:PSS side toward the F-PI-modified PEDOT:PSS surface, which facilitate the hole injection.

Tungsten oxide doped N,N-'-di(naphthalen-1-yl)-N,N-'-diphenyl-benzidine as hole injection layer for high performance organic light-emitting diodes

By introducing tungsten oxide (WO3) doped N,N-'-di(naphthalen-1-yl)-N,N-'-diphenyl-benzidine (NPB) hole injection layer, the great improvement in device efficiency and the organic film morphology stability at high temperature were realized for organic light-emitting diodes (OLEDs). The detailed investigations on the improvement mechanism by optical, electric, and film morphology properties were presented. The experimental results clearly demonstrated that using WO3 doped NPB as the hole injection layer in OLEDs not only reduced the hole injection barrier and enhanced the transport property, leading to low operational voltage and high efficiency, but also improved organic film morphology stability, which should be related to the device stability. It could be seen that due to the utilization of WO3 doped NPB hole injection layer in NPB/tris (8-quinolinolato) aluminum (Alq(3))-based device, the maximum efficiency reached 6.1 cd A(-1) and 4.8 lm W-1, which were much higher than 4.5 cd A(-1) and 1.1 lm W-1 of NPB/Alq(3) device without hole injection layer. The device with WO3 doped NPB hole injection layer yet gave high efficiency of 6.1 cd A(-1) (2.9 lm W-1) even though the device was fabricated at substrate temperature of 80 degrees C.

聚碳酸1,2-丙二酯/聚琥珀酸丁二酯/邻苯二甲酸二烯丙酯共混体系的研究

采用熔融共混的方法制备了聚碳酸1,2-丙二酯(PPC)/聚琥珀酸丁二酯(PBS)共混物和PPC/PBS/DAOP(邻苯二甲酸二烯丙酯)增塑共混物,对共混物的相容性、热性能、结晶性和物理机械性能进行了初步研究.研究结果表明PPC/PBS共混物为不相容体系,PPC对PBS的结晶度影响很小;PBS的加入提高了共混物的起始热分解温度(Td-5%),当共混物中PBS含量从10%增加到90%时,共混物的Td-5%可分别增加15℃到59℃.DAOP对PPC/PBS共混物有增塑作用,当PPC/PBS/DAOP的比例从30/70/0变化到30/70/30时,共混物玻璃化转变温度(Tg)下降了36.9℃.与PPC/PBS共混物相比,组成优化的DAOP增塑共混物PPC/PBS/DAOP(PPC/PBS/DAOP=30/70/5)的断裂伸长率和断裂能最大可提高31倍和34倍,分别达到655.1%和3.4 J/...

A new 1D metal-organic coordination polymer with blue fluorescent emission: [Cd-2(1,10 '-phen)(2)(betc)(H2O)](n)

A new coordination polymer [Cd-2(1,10'-phen)(2)(betc)(H2O)](n) (1) (betc = benzene-1,2,4,5-tetracarboxylate, 1,10'-phen = 1,10'-phenanthroline) was hydrothermally synthesized from CdCl2.2.5H(2)O, H(4)betc and 1,10'-phen at 160 degreesC. It was characterized by IR, XPS, TG and single-crystal X-ray diffraction. Compound 1 possesses infinite chair-like chains which construct 3D framework through pi-pi interactions and the hydrogen bond interactions. The fluorescent spectrum study shows that compound 1 exhibits blue fluorescent emission in the solid at room temperature.

Adsorption of heavy rare earth(III) with extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid

In the present paper, the adsorption of thulium(Ill) from chloride medium on an extraction resin containing bis(2,4,4-trimethylpentyl) monothiophosphinic acid (CL302, HL) has been studied. The results show that 1.5 h is enough for the adsorption equilibrium. The distribution coefficients are determined as a function of the acidity of the aqueous phase and the data are analyzed both graphically and numerically. The plots of log D versus pH give a straight line with a slope of about 3, indicating that 3 protons are released in the adsorption reaction of thulium(III). The content of Cyanex302 in the resin is determined to be 48.21%. The total amount of Tm3+ adsorbed up to resin saturation is determined to be 82.46 mg Tm3+/g resin. Therefore, the sorption reactions of Tm3+ from chloride medium with CL302 can be described as: Tm3+ + 3HL((r)) <----> TmL3(r) + 3H(+) The Freundlich's isothermal adsorption equation is also determined as: log Q = 0.73 log C + 3.05 The amounts (Q) of Tm3+ adsorbed with the resin have been studied at different temperatures (15-40degreesC) at fixed concentrations of Tm3+, amounts of extraction resin, ion strength and acidities in the aqueous phase.

间同立构1,2-聚丁二烯的合成和形态结构研究

间同立构1,2-聚丁二烯自1955年问世以来 ,引起人们的广泛关注 ,但绝大多数研究工作集中在聚合物的合成方面[1～3] ,对其形态结构方面的研究却很少报道[4] ,原因是该聚合物分子侧链含有大量双链 ,在较高温度下 (>150℃ )很容易产生热交联 ,这给结构研究造成了很大困难 .间同立构1,2-聚丁二烯的性能取决于间规度 ,低间规度聚合物呈现弹性体特征 ,而高间规度聚合物则是一种半结晶性塑料 ,其结晶为平面锯齿链正交堆砌 ,Pacm空间群[4] .本文采用一种新的催化体系 ,使合成的1,2-聚丁二烯间规度可以调控.同时首次报道了结晶性间规1,2-聚丁二烯稀溶液浇铸薄膜形成具有单晶取向的板条状片层结构,并应用电子显微学和电子衍射技术确定其晶体结构.1.实验部分1.1样品及试剂　乙酰基丙酮铁 [(Fe(acac) 3)纯度为 99.9% ],使用时配成0.2mol/ L的甲苯溶液 ;三异丁基铝 [Al(i-Bu) 3]由 Aldrich公司提供 ;氢化亚磷酸二乙酯 (DEP)及丁二烯由锦州化学公司提供 ;丁二烯通过蒸馏进行纯化 ;己烷使用前在 Na/ K合金...

TEM studies on single crystal structure of syndiotactic poly(propene-co-butene-1)s

Themorphologies and structures of single crystals of syndiotactic poly(propene-co-1-butene) (PPBU) with 1-butene contents of 2.6, 4.2, 9.9, 16.2, and 47.9 mol % are studied by transmission electron microscopy and electron diffraction. The electron diffraction results show that the 1-butene units are included in the crystalline phase of the sPP homopolymer. A small amount of 1-butene (<4.2 mol %) has no significant influence on the antichiral chain packing of sPP. With increasing content of 1-butene units, an increasing packing disorder is observed in the PPBU copolymers. The antichiral packing model is, however, always the predominant chain packing structure of the copolymers with the analyzed composition. Bright-field electron microscopy observation shows that the PPBU single crystals exhibit always regular rectangular or lathlike shapes with preferred growth direction along their crystallographic b-axes owing to their packing features. The incorporated 1-butene units influence the crystallization behavior of sPP distinctly. With the increase of the 1-butene units, the aspect ratio of the single crystals increases. Furthermore, the typical transverse microcracks and ripples of the highly stereoregular sPP are no more so prominent for the copolymers. The microcracks are occasionally observed in the single crystals of copolymers with low 1-butene content (less than or equal to4.2 mol %), while transverse ripples are only seen in the crystals of the copolymer having a 1-butene content of 9.9 mol %. With a further increase in the content of 1-butene units, the copolymers behave like the low stereoregular sPP, where neither cracks nor ripples are observed any more.

A novel way to enhance electroluminescence performance based on soluble binary and ternary europium 1,1,1-trifluoroacetylacetonate

Five rare earth complexes (Gd(acae)(3), Gd(TFacaC)(3), Eu(acaC)(3), Eu(TFacaC)(3) and Eu(TFacaC)(3)bipy; acac, acetylacetone; TFacac, 1,1,1-trifluoroacetylacetone; bipy, 2,2'-bipyridyl) were synthesized. By comparing the phosphorescence spectra of Gd(acac)(3) and Gd(TFacac)(3) the effect of the replacement of hydrogen by fluorine was examined. Organic light-emitting devices (OLEDs) based on the corresponding europium complexes as emissive layers were also fabricated by the spin-coating method. The triple-layer-type device with the structure glass substrate/ITO (indium-tin oxide)/PVK [poly(N-vinylcarbazole)]/(PVKEu)-Eu-.(TFacac)(3)bipy:PBD[2-(4-bibipyyl)-5-(4-t-butylbipyl-1,3,4-oxadiazole)]/PBD/Al (aluminum) exhibits a brighter red luminescence than those devices with Eu(acac)(3) and Eu(TFacac)(3) complexes as emissive centers upon applying a d.c. voltage.

Red electroluminescent device with europium 1,1,1-trifluoroacetylacetonate complex as emissive center

By comparing the phosphorescence spectra of Gd(acac)(3) (acac: acetylacetone) and Gd(TFacac)(3) (TFacac: 1, 1, 1-trifluoro-acetylacetone), the effect of fluorine replacing of hydrogen was discussed. It can lower the triplet state energy of acac and make it more suitable to the D-5(1) energy state of europium. Organic electroluminescent (OEL) devices with corresponding europium complexes as emissive layers were fabricated. A triple laver-type device with a structure of glass substrate/indium-tin oxide (ITO)/poly(N-vinylcarbazole) (PVK)/PVK:Eu(TFacac)(3)phen:2-(4-biphenyl)-5-(4-t-butylphenyl)-1,3,4-oxadiazole (PBD)/PBD/Al exhibits bright red luminescence upon applying dc voltage, The device has the properties of a diode and the current-bias voltage line was obtained.

Novel sodium sulfonate-functionalized poly(ether ether ketone)s derived from 4,4 '-thiodiphenol

Novel sodium sulfonate-functionalized poly(ether ether ketone)s derived from 4,4'-thiodiphenol with degree of sulfonation up to 2.0 were synthesized by nucleophilic polycondensation of various amount of 5,5 '-carbonylbis(2-fluorobenzenesulfonate) (1) and 4,4'-difluorobenzophenone (2) with 4,4'-thiodipheno (3). Component and structure of the polymers were confirmed by TR, NMR and elemental analysis. Wide angle X-ray diffraction patterns indicated an amorphous structure of the polymers. All the polymers showed excellent thermal stability and poor solubility in water. (C) 2001 Elsevier Science Ltd. All rights reserved.