A 10 Gb/s Directly-Modulated 1.3 mu m InAs/GaAs Quantum-Dot Laser

We demonstrate 10 Gb/s directly-modulated 1.3 mu m InAs quantum-dot (QD) lasers grown on GaAs substrates by molecular beam epitaxy. The active region of the QD lasers consists of five-stacked InAs QD layers. Ridge-waveguide lasers with a ridge width of 4 mu m and a cavity length of 600 mu m are fabricated with standard lithography and wet etching techniques. It is found that the lasers emit at 1293 nm with a very low threshold current of 5 mA at room temperature. Furthermore, clear eye-opening patterns under 10 Gb/s modulation rate at temperatures of up to 50 degrees C are achieved by the QD lasers. The results presented here have important implications for realizing low-cost, low-power-consumption, and high-speed light sources for next-generation communication systems.

Highly efficient and stable organic light-emitting diodes employing MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride as hole injection layer

We report highly efficient and stable organic light-emitting diodes (OLEDs) with MoO3-doped perylene-3, 4, 9, 10-tetracarboxylic dianhydride (PTCDA) as hole injection layer (HIL). A green OLED with structure of ITO/20 wt% MoO3: PTCDA/NPB/Alq(3)/LiF/Al shows a long lifetime of 1012 h at the initial luminance of 2000 cd/m(2), which is 1.3 times more stable than that of the device with MoO3 as HIL. The current efficiency of 4.7 cd/A and power efficiency of 3.7 lm/W at about 100 cd/m(2) have been obtained. The charge transfer complex between PTCDA and MoO3 plays a decisive role in improving the performance of OLEDs.

面向信息系统工程监理的软件工具IT-PM

在信息系统工程开发中引入监理机制已经成为业界的共识。监理组织以独立“第三方”身份加入项目,通过“控制、管理、协调”的手段,达到提高项目质量的目的。分析了信息系统工程监理自动化支持的研究现状,提出了面向信息系统工程监理的软件工具IT-PM。工具以信息系统工程监理的过程模型为基础,支持监理工作的流程和信息管理自动化。

结构因子相角的代数解法及K_8H_5[La(SiWMo_(10)O_(39))(SiW_3Mo_8O_(39))]·nH_2O的晶体结构

一 结构因子相角的代数解法晶体结构研究中的相角问题，一直是晶体学工作者努力探求的基本问题。几十年来，关于相角问题的研究已经取得了巨大的进展，直接法的成熟和普遍应用就是这个进展的显著标志。在直接法相角问题研究中，历来存在两种基本方法，即概率法和代数法。当前直接法的迅猛发展，则主要以概率法为基础，其应用的基本公式即是来自∑关系中的∑_2关系和由此发展出的TANGENT公式，并结合一系列的基本理论和辅助公式，从而使直接法的发展一直呈方兴未艾之势。与此形成鲜明对照的是，相角问题的代数法研究则有日趋下降之势，尤其近十年来则显著落后了。作者从近年来的∑关系研究中，看到要解决相角问题，代数法仍然有其潜在的应作价值，并认为在概率法可以得到应用的许多方面，在代数法那里都应找到对应的类似内容，而代数法在研究和应用中所表现出的不同于概率法的那些方面也正是在相角问题研究中最令人感兴趣的问题，这就是我们进行代数法研究的目的和出发点。（一）1.5和2.5阶代数式的提出及对±2~(II)型相角的估算。（二）一般类型相角的估算（三）结构相角通用代数式的推导。代数法不仅可用于结构半不变量O，π型相角的计算，而且可用于非结构半不变量的种种类型相角的估算，其中包括型和一般类型相角，而且其应用效果完全可以和概率法相比拟，在机时利用上前者有一定优势。通用代数式的获得将为代数法的普遍应用和计算机计算创造了方便条件。二稀土杂多酸根配合物K_8H_5[La(SiWMo_(10)O_(39))(SiW_3Mo_8O_(39))]·nH_2O的晶体结构采用低温技术，在-90 ℃的干燥氮气保护下，收集晶体衍射数据，以直接法解出结构。a = 17.485(5), b = 27.096(6), c = 21.642(5)A, β = 107.79(2)°, z = 4。最后的R值为0.097。中心离子La(III)同两个杂多酸根提供的8 个氧配合。而其中的W、Mo同氧的配位情况基本相同，者是与氧六配位，形成变形配位八面体。

Electronic structure of microporous titanosilicate ETS-10

The electronic structure of a microporous titanosilicate framework, ETS-10 is calculated by means of a first-principles self-consistent method. It is shown that without the inclusion of the alkali atoms whose positions in the framework are unknown, ETS-10 is an electron deficient system with 32 electrons per unit cell missing at the top of an otherwise semiconductor-like band structure. The calculated density of slates are resolved into partial components. It is shown that the states of the missing electrons primarily originate from the Ti-O bond. The local density of states of the Ti-3d orbitals in the ETS-10 framework is quite different from the perovskite BaTiO3. The possibilities of ETS-10 crystal being ferroelectric or having other interesting properties are discussed.

Low-temperature (10 K) infrared measurement of interstitial oxygen in heavily antimony-doped silicon via wafer thinning

A new technique is reported for the rapid determination of interstitial oxygen in heavily Sb-doped silicon. This technique includes wafer thinning and low-temperature 10 K infrared measurement on highly thinned wafers. The fine structure of the interstitial oxygen absorption band around 1136 cm(-1) is obtained. Our results show that this method efficiently reduces free-carrier absorption interference, allowing a high reliability of measurement, and can be used at resistivities down to 1 x 10(-2) Omega cm for heavily Sb-doped silicon.

A 10-bit 50-MS/s sample-and-hold circuit with low distortion sampling switches

A fully-differential switched-capacitor sample-and-hold (S/H) circuit used in a 10-bit 50-MS/s pipeline analog-to-digital converter (ADC) was designed and fabricated using a 0.35-μm CMOS process. Capacitor fliparound architecture was used in the S/H circuit to lower the power consumption. In addition, a gain-boosted operational transconductance amplifier (OTA) was designed with a DC gain of 94 dB and a unit gain bandwidth of 460 MHz at a phase margin of 63 degree, which matches the S/H circuit. A novel double-side bootstrapped switch was used, improving the precision of the whole circuit. The measured results have shown that the S/H circuit reaches a spurious free dynamic range (SFDR) of 67 dB and a signal-to-noise ratio (SNR) of 62.1 dB for a 2.5 MHz input signal with 50 MS/s sampling rate. The 0.12 mm~2 S/H circuit operates from a 3.3 V supply and consumes 13.6 mW.

面向高速应用的10位2GHz数模转换器

提出了一个刷新率达2GHz的10位电流驱动型数模转换器.在综合了精度与芯片面积等因素之后,该数模转换器使用6+4结构.采用电流型逻辑以提高转换器的速度,并采用Q~2 random walk方法设计了一个双中心对称的电流矩阵,确保数模转换器的线性度.该数模转换器核心版图面积为2.2mm×2.2mm,在3.3V单电压供电的情况下,该芯片功耗为790mW.

Electro-Optical Effect Measurement of Thin-Film Material Using PM Fiber Mach-Zehnder Interferometer

A polarization-maintaining (PM) fiber Mach-Zehnder (MZ) interferometer has been established to measure the EO effect of very thin film materials with optical anisotropy. Unlike a common MZ interferometer,all the components are connected via polarization-maintaining fibers. At the same time, a polarized DFB laser with a maximum power output of 10mW is adopted as the light source to induce a large extinction ratio. Here, we take it to determine the electro-optical coefficients of a very thin superlattice structure with GaAs, KTP, and GaN as comparative samples. The measured EO coefficients show good comparability with the others.