Field emission from the structure of well-aligned TiO2/Ti nanotube arrays

Well-aligned TiO2/Ti nanotube arrays were synthesized by anodic oxidation of titanium foil in 0.5 wt.% HF in various anoclization voltages. The images of filed emission scanning electron microscopy indicate that the nanotubes structure parameters, such as diameter, wall thickness and density, can be controlled by adjusting the anoclization voltage. The peaks at 25.3 degrees and 48.0 degrees of X-ray diffraction pattern illuminate that the TiO2 nanotube arrays annealed at 500 degrees C are mainly in anatase phase. The filed emission (FE) properties of the samples were investigated. A turn-on electric field 7.8 V/mu m, a field enhancement factors approximately 870 and a highest FE current density 3.4 mA/cm(2) were obtained. The emission current (2.3 mA/cm(2) at 18.8 V/mu m) was quite stable within 480 min. The results show that the FE properties of TiO2/Ti have much relation to the structure parameters.

Synthesis and field emission of diamond-like carbon nanorods on TiO2/Ti nanotube arrays

Highly ordered TiO2/Ti nanotube arrays were fabricated by anodic oxidation method in 0.5 wt% HF. Using prepared TiO2/Ti nanotube arrays deposited Ni nanoparticles as substrate, high quality diamond-like carbon nanorods (DLCNRs) were synthesized by a conventional method of chemical vapor deposition at 750 degrees C in nitrogen atmosphere. DLCNRs were analyzed by filed emission scanning electron microscopy and Raman spectrometer. It is very interesting that DLCNRs possess pagoda shape with the length of 3-10 mu m. Raman spectra show two strong peaks about 1332 cm (1) and 1598 cm (1), indicating the formation of diamond-like carbon. The field emission measurements suggest that DLCNRs/TiO2/Ti has excellent field emission properties, a low turn-on field about 3.0 V/mu m, no evident decay at 3.4 mA/cm(2) in 480 min. (C) 2009 Elsevier B. V. All rights reserved.

Field emission from TiO2/Ti nanotube arrays with different morphologies

Well-aligned TiO2/Ti nanotube arrays were electrochemically formed in a HF solution for different anodization times. Field emission scanning electron microscopy (FE-SEM) images reveal that anodization time had a great influence on the morphology of TiO2/Ti nanotube arrays. The composition of resulting nanotubes was analyzed by X-ray photoelectron spectroscopy (XPS). Field emission properties of the prepared samples with different morphologies were investigated by the Fowler-Nordheim (F-N) theory. The results indicate that the morphology can affect field emission behaviors. TiO2/Ti nanotube arrays with clear, uniform, and short nanotubes display moderate field emission properties, and have the better turn-on field of 4.6 V/mu m and good field emission stability. (C) 2010 Elsevier B.V. All rights reserved.

Au LX射线发射截面和Al、Ti、Ni表面可见、红外光谱测量

本实验工作是在中国原子能科学研究院的HI-13串列加速器国家实验室第二测量厅原子物理实验平台上完成。本工作采用能量为20-50MeV的高电荷态O5+离子去轰击Au, 测量了不同能量下Au的L1、Lα、Lβ、Lγ的X射线谱，计算了不同能量下各条X射线的产生截面，并与ECPSSR理论计算结果进行了比较。实验结果表明σ（Ll）/σ(Lα) 和σ（Lγ）/σ(Lα)与ECPSSR理论计算结果符合比较好，而对于σ（Lβ）/σ(Lα)，在较低能区实验值略高于理论值。在中国科学院近代物理研究所320kV高电荷态离子实验研究平台上测量了Xeq+ (q=17-29)入射Al、Ti和Ni等表面诱发的可见光和红外光。通过对靶原子光谱线的研究，实验发现，随着入射离子的电荷态增高，原子和离子的各种光谱线可得到有效地激发。低速高电荷态离子入射金属固体表面，靶原子的特征谱线的激发强度，与入射离子的电荷态q密切相关。qc的实验测量值和理论计算值符合的较好

TI／AL系统离子束混合研究

本文用100KW Ar~2离子在低温下对Tl/AL薄膜进行了混合束研究。实验试样是在单晶硅上蒸镀约5000A的铝膜，相继再蒸上所需不同厚度的钛膜。用2.0Hev α粒子对注入前后的样品进行了RBS分析。经过仔细的实验数据处理，结果发现：T1／AL界面原子混合量σ~2跟注入剂量φ成线性关系，界面的氧化层对T1／AL界面区原子间的相互混合有一定的影响；在相同注入条件下，界面原子混合σ~2随钛膜厚度的变化成一定的规律。另外，还就Ti/AL离子事混合进行了计算机Nonte Carto模拟计算，并与实验结果进行了比较和讨论

Crystallographic and electrochemical characteristics of melt-spun Ti-Zr-Ni-La alloys

Ti-based icosahedral quasicrystalline phase (I-phase) exhibited excellent hydrogen storage property for special structure. Unfortunately, the application as the negative electrode material of the nickel-metal hydride batteries was limited due to the poor electrochemical kinetics. Meanwhile, rare-earth element was beneficial to the electrochemical properties of Ti, Zr-based alloy.

Ti- Zr- Ni基准晶合金的热力学和电化学贮氢性能

对急冷凝固方法、熔融纺丝法、机械合金化法等制备Ti-Zr-Ni基准晶合金的方法进行探讨,综述了几种Ti-Zr-Ni基准晶合金的热力学和电化学贮氢性能