双过临界喷管充气混合装置

双过临界声速喷管充气混合装置能够快速、均匀地混合两种气体，其背压适用范围比临界声速喷管提高了40%，性能良好，结构简单。经边界层修正、实态标定和色谱检验，混合效果良好。适用于各种燃烧、爆轰实验的气体混合。

Multiphase technique improves mud-pulse velocity calculations

Measurement while drilling (MWD) has become a popular survey technology to monitor directional data, drilling data, formation evaluation data and safety data in the world. And closed loop drilling shows promise in recent years. Obviously, the method of tr

岩石材料的三维各向异性损伤破坏模型与数值模拟

基于复合材料以及连续介质损伤理论,给出了岩石材料的各向异性损伤破坏模型.通过引入与岩石材料单独加载行为相对应的特征摸态构成的四阶对称损伤张量,描述了岩石材料的损伤演化过程,其中对不同主应变方向采用不同的损伤变量,而对同一主应变方向拉压时的损伤则采用不同的损伤变量来描述.在数值模拟岩石破坏过程的程序中,采用了张量分解的方法.将该模型编写用户材料子程序,并嵌入到大型有限元分析程序ABAQUS中,通过ABAQUS/EXPLICIT SOLVER的显式有限元算法求解.利用此程序对岩石材料的单轴压缩进行了数值模拟.

Complex potentials and singular integral equation for curve crack problem in antiplane elasticity

Four types of the fundamental complex potential in antiplane elasticity are introduced: (a) a point dislocation, (b) a concentrated force, (c) a dislocation doublet and (d) a concentrated force doublet. It is proven that if the axis of the concentrated force doublet is perpendicular to the direction of the dislocation doublet, the relevant complex potentials are equivalent. Using the obtained complex potentials, a singular integral equation for the curve crack problem is introduced. Some particular features of the obtained singular integral equation are discussed, and numerical solutions and examples are given.

降雨坡面径流汇集模型及其在茅坪滑坡中的应用

采用运动波理论,并基于地形对坡面流流向的控制作用,建立了一种能够模拟坡面流集中汇流过程的数值计算模型,该模型得到了人工降雨试验的良好验证.将该模型运用于茅坪滑坡实际情况,得到了茅坪滑坡的表面产流特征,尤其是较好地显示了茅坪滑坡表面的径流汇集路线,可为合理设计茅坪滑坡表面排水工程提供科学依据.

四边固定载流矩形薄板的磁弹性稳定性分析

本文针对四边固定载流矩形薄板，利用Mathieu方程解的稳定性，研究其在电磁场与机械荷载共同作用下的磁弹性稳定性问题。首先在载流薄板的磁弹性非线性运动方程、物理方程、几何方程、洛仑兹力表达式及电动力学方程的基础上，导出了载流薄板在电磁场与机械荷载共同作用下的磁弹性动力稳定方程，然后应用Galerkin方法将稳定方程整理为Mathieu方程的标准形式，并将薄板的动力稳定性问题归结为对Mathieu方程的求解。利用Mathieu方程的稳定解区域与非稳定解区域的分界，即方程系数λ和η的本征值关系，得出了磁弹性问题失稳临界状态的判别方程。通过具体算例，给出了四边固定载流矩形薄板的磁弹性动力失稳临界状态与相关参量之间的关系曲线，并对计算结果及其变化规律进行了分析讨论。

Numerical Investigation of Richtmyer-Meshkov Instability Driven by Cylindrical Shocks

In this paper, a numerical method with high order accuracy and high resolution was developed to simulate the Richtmyer-Meshkov(RM) instability driven by cylindrical shock waves. Compressible Euler equations in cylindrical coordinate were adopted for the cylindrical geometry and a third order accurate group control scheme was adopted to discretize the equations. Moreover, an adaptive grid technique was developed to refine the grid near the moving interface to improve the resolution of numerical solutions. The results of simulation exhibited the evolution process of RM instability, and the effect of Atwood number was studied. The larger the absolute value of Atwood number, the larger the perturbation amplitude. The nonlinear effect manifests more evidently in cylindrical geometry. The shock reflected from the pole center accelerates the interface for the second time, considerably complicating the interface evolution process, and such phenomena of reshock and secondary shock were studied.

A蛋白定向固定抗体用于椭偏光学生物传感器免疫检测

椭偏光学生物传感器是在椭偏光学显微成像技术的基础上发展的一项生物传感技术.它能够直接观测固体表面上的生物分子面密度,毋需任何标记辅助,适合发展成为一种无标记免疫检测技术.研究了在硅片表面上通过A蛋白定向固定抗体分子用于椭偏光学生物传感器免疫检测的可能性.实验结果表明,通过A蛋白固定抗体得到的抗体膜层的均一性和固定量的重复性能够保证椭偏光学生物传感器免疫检测结果的质量.通过A蛋白定向固定的抗体的抗原结合位点趋向一致,显著提高了抗体与抗原结合的能力.此外,通过蛋白A固定的免疫球蛋白G分子能够结合更多的多克隆抗体分子说明通过A蛋白固定的蛋白质分子能够较好地保持其空间构象.

Burning Low Volatile Fuel in Tangentially Fired Furnaces with Fuel Rich/Lean Burners

Pulverized coal combustion in tangentially fired furnaces with fuel rich/lean burners was investigated for three low volatile coals. The burners were operated under the conditions with varied value N-d, which means the ratio of coal concentration of the fuel rich stream to that of the fuel lean stream. The wall temperature distributions in various positions were measured and analyzed. The carbon content in the char and Nox emission were detected under various conditions. The new burners with fuel rich/lean streams were utilized in a thermal power station to burn low volatile coal. The results show that the N-d value has significant influences on the distributions of temperature and char burnout. There exists an optimal N-d value under which the carbon content in the char and the Nox emission is relatively low. The coal ignition and Nox emission in the utilized power station are improved after retrofitting the burners.

Two-Point Closure Strategy in the Mapping Closure Approximation Approach

A two-point closure strategy in mapping closure approximation (MCA) approach is developed for the evolution of the probability density function (PDF) of a scalar advected by stochastic velocity fields. The MCA approach is based on multipoint statistics. We formulate a MCA modeled system using the one-point PDFs and two-point correlations. The MCA models can describe both the evolution of the PDF shape and the rate at which the PDF evolves.

Evaluation of the Effectiveness of Representative Methods for Determining Young's Modulus and Hardness from Instrumented Indentation Data

The effectiveness of Oliver & Pharr's (O&P's) method, Cheng & Cheng's (C&C's) method, and a new method developed by our group for estimating Young's modulus and hardness based on instrumented indentation was evaluated for the case of yield stress to reduced Young's modulus ratio (sigma(y)/E-r) >= 4.55 x 10(-4) and hardening coefficient (n) <= 0.45. Dimensional theorem and finite element simulations were applied to produce reference results for this purpose. Both O&P's and C&C's methods overestimated the Young's modulus under some conditions, whereas the error can be controlled within +/- 16% if the formulation was modified with appropriate correction functions. Similar modification was not introduced to our method for determining Young's modulus, while the maximum error of results was around +/- 13%. The errors of hardness values obtained from all the three methods could be even larger and were irreducible with any correction scheme. It is therefore suggested that when hardness values of different materials are concerned, relative comparison of the data obtained from a single standard measurement technique would be more practically useful. It is noted that the ranges of error derived from the analysis could be different if different ranges of material parameters sigma(y)/E-r and n are considered.

FEM Simulations and Optimization about Residual Stresses in Coating Structures with Functionally Graded Materials Layer

An elasto-plastic finite element method is developed to predict the residual stresses of thermal spraying coatings with functionally graded material layer. In numerical simulations, temperature sensitivity of various material constants is included and mix

利用微重力条件研究分散体系

讨论了重力对分散体系特性的可能影响以及如何利用微重力条件开展在重力环境中难以深入研究的问题，并探讨了对理论研究和实际应用有价值的可能课题。

运输车辆振动环境与人体响应的监测研究

以五十铃八吨运输汽车为对象，针对其在青藏公路上格尔木至拉萨段的行驶路线，进行了以座椅和驾驶员腰部为重点的振动测试。并对测量结果作了规律性分析。

Molecular dynamics simulation of the role of dislocations in microcrack healing

The molecular dynamics method is used to simulate microcrack healing during heating or/and under compressive stress. A centre microcrack in Cu crystal would be sealed under compressive stress or by heating. The role of compressive stress and heating in crack healing was additive. During microcrack healing, dislocation generation and motion occurred. When there were pre-existing dislocations around the microcrack, the critical temperature or compressive stress necessary for microcrack healing would decrease, and, the higher the number of dislocations, the lower the critical temperature or compressive stress. The critical temperature necessary for microcrack healing depended upon the orientation of the crack plane. For example, the critical temperature for the crack along the (001) plane was the lowest, i.e. 770K.