糖蜜的可发酵性与制氢条件

为了提高糖蜜的可发酵性和氢转化率,采用批式发酵法研究了糖蜜前处理过程和发酵条件对Ethanoligenens sp B49生长和产氢的影响。结果表明去除煮沸驱氧过程可以大大提高Ethanoligenens sp B49发酵糖蜜产氢的性能和糖蜜的氢转化率。Ethanoligenens sp B49细胞生长和产氢的最佳COD为20.6g/L,可发酵糖蜜的最大耐受COD为41.2 g/L,酵母粉可以大大提高糖蜜的生物可利用性和比产氢率。COD为20.6g/L,外加酵母粉浓度为4g/L是Ethanoligenens sp B49发酵糖蜜产氢的最佳条件,单位体积产氢量达到78.97mmolH2/L培养基,比对照提高了76.2%。本研究改进糖蜜发酵前处理方法和发酵条件,可以大大提高了糖蜜制氢的生物可发酵性和比产氢率。

中国东北西部地区沙质荒漠化过程与植被动态关系的生态学研究——群落多样性与沙质荒漠化过程

依据东北西部沙质荒漠化地区植被的分类与排序,分析了不同演替梯度上植被群落多样性指数与DCA排序坐标值的相关关系,利用其探讨群落多样性与沙质荒漠化过程的关系;科尔沁沙地、呼伦贝尔沙地,1)植物群落的生态优势度λ、Renyi的均匀度E1与群落分布的地下水位有显著的相关关系;2)植物群落Hill的多样性指数H0,H1、Hill的均匀度Eh、Hill指数的均匀度E′1与海拔、湿润系数、Thornthwaite指数、降水量、地下水位、放牧干扰等有显著的相关关系;3)植物群落Renyi的多样性指数N0,N1、Heip修正的均匀度Ep、Alatalo修正的均匀度E′h与经度、温暖指数、冷暖指数、Thornthwaite指数、土壤有机质、地下水位、放牧等干扰有显著的相关关系。4)呼伦贝尔沙地的完工-海拉尔沙带,樟子松林、贝加尔针茅羊草草甸草原;科尔沁沙地的油松林、羊草草甸草原、丛生禾草草原具有较高的多样性,各群落类型随着沙质荒漠化过程的逐渐加剧,物种丰富度逐渐降低,其递减趋势分为旱生沙化系列、湿生沙化系列、盐水至水生系列。按各群落类型的物种丰富度递减顺序可分为6个级别,6个级别所含的群落类型分别对应着稳定沙地(A、B),固定沙丘(C),半固定沙丘(D),半流动沙丘(E),流动沙丘(F)。

Synthesis, photophysical and electrophosphorescent properties of mononuclear Pt(II) complexes with arylamine functionalized cyclometalating ligands

Four cyclometalated Pt(II) complexes, i.e., [(L-2)PtCl] (1b), [(L-3)PtCl] (1c), [(L-2)PtC CC6H5] (2b) and [(L-3)PtC CC6H5] (2c) (HL2 = 4-[p-(N-butyl-N-phenyl)anilino]-6-phenyl-2,2'-bipyridine and HL3 = 4-[p(-N,N'-dibutyl-N'-phenyl)phenylene-diamino]-phenyl-6-phenyl-2,2'-bipyridine), have been synthesized and verified by H-1 NMR, C-13 NMR and X-ray crystallography. Unlike previously reported complexes [(L-1)PtCl] (1a) and [(L-1)PtC CC6H5] (2a) (HL1 = 4,6-diphenyl-2,2'-bipyridine), intense and continuous absorption bands in the region of 300-500 nm with strong metal-to-ligand charge transfer ((MLCT)-M-1) (d pi(Pt) -> pi*(L)) transitions (epsilon similar to 2 x 10(4) dm(3) mol (1) cm (1)) at 449-467 nm were observed in the UV-Vis absorption spectra of complexes 1b, 1c, 2b and 2c.

Synthesis, structure and photochromic properties of a novel 1,6-hexanediamine trimolybdate supramolecular compound

A novel supramolecular compound 1,6-hexanediamine trimolybdate ((C6H18N2[Mo3O10], denoted as HDAMo) has been synthesized by a hydrothermal method and its structure has been characterized by elemental analyses, Fourier transform infrared (FT-IR) spectra, single-crystal X-ray diffraction (XRD) technique. This single crystal compound consists of protonated 1,6-hexanediamine (HDA) cations and polyoxometalate [Mo3O10](2-) anions. Its crystal structure belongs to monoclinic system (space group P2(1)/n) with a = 7.7508(14), b = 11.467(2), c = 16.167(3) angstrom, beta = 92.689(3)degrees, V = 143 5.3(5) angstrom(3), Z = 4 and D-ealc = 2.619 g cm(-3). The final statistics based on F-2 are GOF = 0.980, R-1 = 0.0261 and wR(2) = 0.0506 for I > 2 sigma(I). XRD analysis revealed that in the crystal structure of HDAMo, novel infinite [Mo3O10](2-) chains parallel to a axis are made up of distorted MoO6 octahedra connected by corners and edges. The protonated HDA cations occupy channels formed by [Mo(3)O3(10)](2-) Chains and exhibit strong hydrogen bond interactions to terminal and bridging oxo groups of the chains. The [Mo3O10](2-) chains linked through protonated HAD cations formed a one-dimensional network. The HDAMo compound shows novel photochromic properties, i.e., its color changes from white to reddish brown gradually under UV irradiation. XRD, FT-IR, ESR spectra and XPS are used to investigate the photochromic behavior of the compound.

Improved optical photoluminescence by charge compensation in the phosphor system CaMoO4: Eu3+

It has been found that charge compensated CaMoO4:Eu3+ phosphors show greatly enhanced red emission under 393 and 467 nm-excitation, compared with CaMoO4:Eu3+ without charge compensation. Two approaches to charge compensation, (a) 2Ca(2+) -> EU3+ + M+, where M+ is a monovalent cation like Li+, Na+ and K+ acting as a charge compensator; (b) 3Ca(2+) -> 2EU(3+) + vacancy, are investigated. The influence of sintering temperature and Eu3+ concentration on the luminescent property of phosphor samples is also discussed.

偏硅酸镉的自激活发光

利用高温固相法合成了一种具有自激活发光行为的CdSiO3基质.对样品进行了X射线衍射分析和光谱分析.光谱分析结果表明,在偏硅酸镉的发射光谱中存在三个自激活发光峰,它们分别位于380,467和560nm处,另外,通过热释光谱技术讨论了偏硅酸镉中的缺陷及相关机理.在热释光谱中有两个明显的热释峰,分别位于448和563K,它们的陷阱深度分别为0 58和0 61eV,表明了在偏硅酸镉中存在着不同的陷阱,这些陷阱的存在导致了偏硅酸镉的自激活发光.

Syntheses and crystal structures of [Mn(H2O)(4)(bpy)]L center dot 4H(2)O, [Mn(H2O)(4)(bpy)]L ' center dot 4H(2)O (H2L = SUCCINIC ACID, H2L ' = FUMARIC ACID)

Reactions of freshly prepared M(OH)(2-2x)(CO3)(x) (.) yH(2)O (M = Mn, Zn) and 4,4'-bipyridine (bpy) with succinic acid (H2L) or famaric acid (H2L') in CH3OH-H2O afforded [Mn(H2O)(4)(bpy)]L (.) 4H(2)O, 1, [Mn(H2O)(4)(bpy)]L' (.) 4H(2)O, 2 and [Zn(H2O)(4)(bpy)]L (.) 4H(2)O, 3. The three coordination polymers are isostructural and consist of (1)(infinity)[M(H2O)(4)(bpy)(2/2)](2+) cationic chains, crystal H2O molecules and dicarboxylate anions (succinate or fumarate anions). Within the chains, the metal atoms are each octahedrally coordinated by four aqua oxygen atoms and two pyridyl nitrogen atoms from two 4,4'-bipyridine ligands. The crystal H2O molecules are hydrogen bonded to dicarboxylate anions to form ribbon-like anionic chains. The cationic and anionic chains are interconnected via hyqrogen bonds to generate a 3D network. Crystal data: 1 triclinic, P (1) over bar, a = 7.235(1), b = 7.749(2), c = 10.020(2) Angstrom, alpha = 79.95(3), beta = 88.79(3), gamma = 71.39(3)degrees, V = 523.9(2) Angstrom(3) and D-cal = 1.494 g cm(-3) for Z = 1; 2 triclinic, P (1) over bar, a = 7.127(1), b = 7.800(2), c = 9.945(2) Angstrom, alpha = 80.26(3), beta = 87.86(3), gamma = 72.69(3)degrees, V = 520.2(2) Angstrom(3) and D-cal = 1.498 g cm(-3) for Z = 1; 3 triclinic, P (1) over bar, a = 7.189(1), b = 7.764(2), c = 9.843(2) Angstrom, alpha = 79.16(3), beta = 87.80(3), gamma = 71.29(3)degrees, V = 510.9(2) Angstrom(3) and D-cal = 1.559 g cm(-3) for Z = 1.

Synthesis and characterization of spherical Sr2CeO4 phosphors by spray pyrolysis for field emission displays

A blue emitting Sr2CeO4 phosphor with a one-dimensional structure has been prepared by a two-step spray pyrolysis (SP) method, starting from the aqueous solutions of metal nitrates with citric acid and polyethylene glycol (PEG) as additives. The material is ultimately designed for field emission displays (FEDs). X-ray diffraction (XRD), thermogravimetric and differential thermal analysis (TG-DTA), field emission scanning electron microscope pictures (FE-SEM) as well as photoluminescence (PL) and cathodoluminescence (CL) spectroscopy and lifetime measurements have been employed to characterize the samples. The morphology, PL and low voltage CL properties of Sr2CeO4 phosphors as-prepared using the SP method have been investigated by changing the concentration of the precursor solution, concentration of PEG, annealing temperature, acceleration voltage and filament current. The obtained Sr2CeO4 phosphor particles are spherical and of submicron size, 0.5-2 mu m. The emission spectrum of the phosphors shows a broad band with maximum at 467 nm (lifetime = 37.4 mu s; CIE chromaticity coordinates: x = 0.15 and y = 0.21), presumably due to a ligand-to-metal charge-transfer transition.

Local structure and valences of samariurn in SrB4O7 : Sm and SrB6O10 : Sm prepared in-air

The coordination numbers for the samarium atoms and the Sm-O bond distances in SrB4O7:Sm and SrB6O10:Sm prepared in air were determined by means of Sm-L-3 edge EXAFS. The coordination. was found to be nine-folded for both these hosts and the bond distance was 2.40-2.42 Angstrom in SrB4O7:Sm and 2.42-2.44 Angstrom in SrB6O10:Sm. For SrB4O7:Sm the coordination number is coincident with that of the strontium. atoms suggesting the substitution of the samarium atoms at the strontium sites. The coordination number of the strontium atoms in SrB6O10 was also suggested to be nine assuming the same type of substitution. The valences of samarium were determined from the luminescent spectra. Both divalent and trivalent ions were present in both SrB4O7:Sm and SrB6O10:Sm, while the fraction of Sm2+ was higher in the former than in the latter. This difference has been assigned to the difference in rigidity between the B-O networks in these structures.

Study of PVT behavior of biaxially oriented polypropylene resins in the melting state

The PVT data of five kinds of biaxially oriented polypropylene (BOPP) Resins was measured by the PVT-100 apparatus. Thermal expansion coefficients (alpha) and isothermal compressibility (beta) were evaluated from Tait equation in the melting state and then compared with those fitted with the value of experiment. The results showed that it was reasonable to calculate alpha and beta with Tait equation in the melting state. At the same time, it was found that thermal expansion coefficients, isothermal compressibility and the melting temperature (T-m) of one of BOPP melts (S28C) were lower than those of the others in the same test conditions, indicating that the volume deformation of S28C resin is' less so that it could be realized to avoid arising surface defects of the film (biaxially oriented polypropylene film) due to. contracting, thereby decrease damage to the film in the subsequence process. Accordingly superior processing properties of S28C resin are confirmed from PVT. speciality.

A transparent thin film with hexagonal mesostructure containing rhodamine 6G

A transparent thin film was prepared by depositing the sol-get mixture for the synthesis of MCM-41 mesoporous molecular sieve doped with rhodamine 6G (R6G) dye on glass substrates. The film of silica-surfactant-R6G materials, which was identified to possess hexagonally ordered mesostructure, was composed of nanocrystallites about 35 nm in diameter and 1-10 mum in thickness. Cleanness of the substrates, concentration of the sol-gel mixture and rate of evaporation of the solvent were the key factors affecting transparency and homogeneity of the film. Moreover, optical change and lack in dye aggregation were observed to the R6G-functionalized MCM-41 thin film in contrast with that in ethanol solution.

薄膜用聚丙烯树脂熔融态PVT行为的研究

利用PVT 10 0分析仪对 5种不同牌号的双向拉伸用聚丙烯 (BOPP)树脂的压力 体积 温度 (PVT)特性进行了测定 ,并利用Tait方程法得出BOPP熔体的热膨胀系数 (α)随温度和等温压缩系数 (β)随压力的变化关系 .研究结果表明 ,在相同条件下 ,牌号为S2 8C的BOPP熔体的热膨胀系数、等温压缩系数和结晶熔融温度分别低于其它牌号 ,因此 ,我们推断S2 8C在冷片形成过程中的体积形变较小 ,可避免由于收缩产生的模片表面缺陷 ,进而减少在后续双向拉伸过程中的破膜现象