He喷嘴带传输及X-γ符合测量装置

本文介绍了He喷嘴带传输及X-γ符合测量装置对重缺中子远离核作活性分离鉴别的基本原理和技术路线，以及该装置首次在本所在线完成的实验结果。通过对110 MeV ~(16)O+~(185)Re实验主要反应产物的测量，指定出~(195)Bi，~(196)Bi，~(192)Tl的半衰期分别为3.11 ± 0.30，4.39 ± 0.53和10.8 ± 1.8 Min，与文献报道一致，并根据母子体衰变平衡拐点Tm初步分析了~(195)Pb；在110 MeV ~(16)O+~(142)Nd实验中，首次测量了~(153)Er的EC/β~+衰变，得到其下列四条新γ线：188.6，352.3，400.0，451.6 KeV(±0.3KeV)，并指定其寿命值T_(1/2) = 35.3 ± 1.6 Sec，与文献报道的根据α衰变测得的半衰期36 ± 2 Sec一致

基于TM的渤海海岸带1988~2000年生态环境变化

海岸带作为海陆之间的过渡地带,是全球生态环境最为复杂和特殊之处。研究海岸带土地利用变化对于了解该区域生态环境演变具有重要意义。利用1988和2000年的Landsat-TM数据,在GIS技术支持下,通过一系列空间分析,得到渤海海岸带土地利用/土地覆盖变化,结合社会经济统计资料分析该区域生态环境的动态变化情况及其驱动因素。结果表明,1988~2000年,由于渤海海岸带社会经济的快速发展,海岸带土地利用格局发生了巨大的变化。耕地大面积减少,城乡工矿用地、养殖池塘、盐田急剧扩张;林地、湿地等具有重要生态价值的土地类型面积显著下降。表明强烈的人类活动已经使自然生态系统受到破坏,渤海海岸带生态环境质量总体上呈现下降趋势。

基于TM影像的表层土壤有机碳空间格局

土壤有机碳是土壤肥力的核心指标之一,理解其空间分布格局对促进精准农业的发展和科学施肥具有重要意义。本研究旨在检验TM影像结合地面采样数据分析黑龙江省黑土分布区表层土壤有机碳空间分布格局的可行性。结果表明:1)表层土壤有机碳浓度与TM5波段呈显著正相关(r=0.553,P<0.01),与TM4、TM5波段影像像素值之间满足二次多项式回归关系(R2=0.6791,P<0.05);2)回归模型对表层土壤有机碳空间分布格局具有较好的预测效果(R2=0.7097,P<0.05);3)海拔高于200m的地区表层土壤有机碳浓度显著高于海拔低于200m的地区(P<0.05)。

基于TM影像和统计分析的林分参数估测研究(英文)

林业研究中的主要兴趣点之一在于通过经验或半经验模型建立林分参数与遥感影像数据间的相互关系来估测林分参数。基于覆盖美国佛罗里达州东北Duval县的遥感数据和两块样地清查数据,论文探讨了所选林分参数与TM影像光谱DN值间的相关性。相关性分析结果表明,单波段或植被指数对林分参数的解释能力低于50%,为此构建了林分参数与影像多波段间多元回归模型来估测林分参数。预测结果通过另一组数据验证,除林分密度外,其它参数估测可信度达75%以上。论文最后探讨了预测模型不足和需改进的地方,并指出该研究有助于更好地理解影像光谱值和林分参数间的关系。图1表2参9。

景观指数之间的相关分析

应用辽宁省1997~1998年的TM 5影像数据,编制了景观类型图,以78个县市区为单位,分割成78个景观,共计算39个景观格局指数,对它们进行了相关分析。总面积是最基本的景观指数,它决定景观总边界长度、斑块数、类型密度等基本指数,同时与多个指数有显著的相关关系(相关系数绝对值大于0.75)。形状指数的独立性强,极少数指数与其它指数有显著的相关关系;多样性指数和蔓延度指数之间信息重复量最多,都表示景观的异质性,但多样性指数以面积百分比表示景观异质性,而蔓延度指数以类型之间相邻边界的百分比表示景观异质性。研究发现,如果两个指数之间存在显著的相关关系,而由它们两个构成的指数与它们之间没有显著的相关关系。如果指数平均值之间存在显著的相关关系,则它们的变异系数之间不存在显著的相关关系。景观指数间的相关系数不仅与景观格局本身有关,还与空间尺度,分类系统、计算公式及其参数、计算单元和生态学意义关系密切。指数之间影响因子的相同之处越多,它们之间存在显著相关关系的概率越大。

辽宁省土地退化与景观生态建设

利用 1997～ 1998年 1∶2 5万辽宁省TM遥感影像及相应的GIS获取的数据 ,调查分析了辽宁省土壤侵蚀、土地沙化和盐渍化 3种类型土地退化程度、面积和分布 .结果表明 ,全省 92 .5 2 %的土地面积遭受不同程度的侵蚀 ,3.39%的土地为沙化土地 ,2 .2 2 %土地为盐渍化土地 .在此基础上 ,以新的角度进行全省土地退化分区 :现代侵蚀退化区、地质侵蚀退化区和沙化盐渍化退化区 ,分析不同区域内不同类型的退化特点和原因 ,依据区域自身特点和景观生态学原理 ,提出相应的景观生态建设恢复治理模式 .

Analysis of spatio-temporal dynamic pattern and driving forces of urban land in China in 1990s using TM images and GIS

China has witnessed fast urban growth in the recent decade. This study analyzes spatio-temporal characteristics of urban expansion in China using satellite images and regionalization methods. Landsat TM images at three time periods, 1990/1991, 1995/1996, and 1999/2000, are interpreted to get 1:100000 vector land use datasets. The study calculates the urban land percentage and urban land expansion index of every 1 km(2) cell throughout China. The study divides China into 27 urban regions to conceive dynamic patterns of urban land changes. Urban development was achieving momentum in the western region, expanding more noticeably than in the previous five years, and seeing an increased growth percentage. Land use dynamic changes reflect the strong impacts of economic growth environments and macro-urban development policies. The paper helps to distinguish the influences of newly market-oriented forces from traditional administrative controls on China's urban expansion. (c) 2005 Elsevier Ltd. All rights reserved.

Uncertainties in estimates of cropland area in China: a comparison between an AVHRR-derived dataset and a Landsat TM-derived dataset

The large uncertainties in estimates of cropland area in China may have significant implications for major cross-cutting themes of global environmental change-food production and trade, water resources, and the carbon and nitrogen cycles. Many earlier studies have indicated significant under-reporting of cropland area in China from official agricultural census statistics datasets. Space-borne remote sensing analyses provide an alternative and independent approach for estimating cropland area in China. In this study, we report estimates of cropland area from the National Land Cover Dataset (NLCD-96) at the 1:100,000 scale, which was generated by a multi-year National Land Cover Project in China through visual interpretation and digitization of Landsat TM images acquired mostly in 1995 and 1996. We compared the NLCD-96 dataset to another land cover dataset at I-km spatial resolution (the IGBP DIScover dataset version 2.0), which was generated from monthly Advanced Very High Resolution Radiometer (AVHRR)-derived Normalized Difference Vegetation Index (NDVI) from April, 1992 to March, 1993. The data comparison highlighted the limitation and uncertainty of cropland area estimates from the DIScover dataset. (C) 2003 Elsevier Science B.V. All rights reserved.

Analysis of arable land loss and its impact on rural sustainability in Southern Jiangsu Province of China

Rapid urbanization and industrialization in southern Jiangsu Province have consumed a huge amount of arable land. Through comparative analysis of land cover maps derived from TM images in 1990, 2000 and 2006, we identified the trend of arable land loss. It is found that most arable land is lost to urbanization and rural settlements development. Urban settlements, rural settlements, and industrial park-mine-transport land increased, respectively, by 87 997 ha (174.65%), 81 041 ha (104.52%), and 12 692 ha (397.99%) from 1990 to 2006. Most of the source (e.g., change from) land covers are rice paddy fields and dryland. These two covers contributed to newly urbanized areas by 37.12% and 73.52% during 1990-2000, and 46.39% and 38.86% during 2000-2006. However, the loss of arable land is weakly correlated with ecological service value, per capita net income of farmers, but positively with grain yield for some counties. Most areas in the study site have a low arable land depletion rate and a high potential for sustainable development. More attention should be directed at those counties that have a high depletion rate but a low potential for sustainable development. Rural settlements should be controlled and rationalized through legislative measures to achieve harmonious development between urban and rural areas, and sustainable development for rural areas with a minimal impact on the ecoenvironment. (C) 2009 Elsevier Ltd. All rights reserved.

Synthesis and Luminescent Properties of LaAlO3:RE3+ (RE = Tm, Tb) Nanocrystalline Phosphors via a Sol-Gel Process

LaAlO3:Tm3+ and LaAlO3:Tb3+ phosphors were prepared through a Pechini-type sol-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), photoluminescence, and cathodoluminescence (CL) spectra were utilized to characterize the synthesized phosphors. The XRD results reveal that the fully crystalline pure LaAlO3 Phase can be obtained at 800 degrees C. The FE-SEM image indicates that the phosphor samples are composed of aggregated spherical particles with sizes ranging from 40 to 80 nm. Under the excitation of ultraviolet light (230 nm) and low-voltage electron beams (1-3 kV), the LaAlO3:Tm3+ and LaAlO3:Tb3+ phosphors show the characteristic emissions of Tb3+ (D-1(2)-> H-3(6,4),F-3(4) transitions) and Tm3+ (D-5(3,4)-> F-7(6,5,4,3) transitions) respectively. The CL of the LaAlO3:Tm3+ phosphors have high color purity and comparable intensity to the Y2SiO5:Ce3+ commercial product, and the CL colors of Tb3+-doped LaAlO3 phosphors can be tuned from blue to green by changing the doping concentration of Tb3+ to some extent.

Self-assembled 3D flowerlike Lu2O3 and Lu2O3 : Ln(3+) (Ln = Eu, Tb, Dy, Pr, Sm, Er, Ho, Tm) microarchitectures: Ethylene glycol-mediated hydrothermal synthesis and luminescent properties

Three-dimensional flowerlike Lu2O3 and Lu2O3:Ln(3+) (Ln = Eu, Th, Dy, Pr, Sm, Er, Ho, Tm) microarchitectures have been successfully synthesized via ethylene glycol (EG)-mediated hydrothermal method followed by a subsequent heat treatment process. X-ray diffraction, Fourier transform infrared spectroscopy, energy-dispersive X-ray spectra, thermogravimetric and differential thermal analysis, elemental analysis, inductively coupled plasma atomic absorption spectrometric analysis, ion chromatogram analysis, X-ray photoelectron spectra, scanning electron microscopy, transmission electron microscopy, photoluminescence spectra as well kinetic decays, and cathodoluminescence spectra were used to characterize the samples. Hydrothermal temperature, EG, and CH3COONa play critical roles in the formation of the lutetium oxide precursor microflowers. The reaction mechanism and the self-assembly evolution process have been proposed. The as-formed lutetium oxide precursor could transform to Lu2O3 With their original flowerlike morphology and slight shrinkage in the size after postannealing process.